Hi folks,
I have a big problem after installing my Vista x64 Ultimate. All the drivers are Vista x64 drivers and installed correctly. After installing VMWare Workstation 6 (59824) on my system and using an existing Win XP Pro 32bit (Virtual Machine), all I get when I start the machine:
Unable to open network mapping library. Please verify host is set up correctly. Virtual device ethernet0 will start disconnected.
I don't know, why this comes up. The VM was created under Vista x86 Ultimate and worked perfectly with VMWare Server 2 beta.
Can anyone of you help me? Thx.
Had the same problem with XP 64bit.
Using my VM's within Server 2 Beta and returning to WKS 6, I had the same error.
Returning to the backup of these VM's was the only solution to make them work on WKS 6.
VM's created with Server 2 Beta had the same problem.
What you can learn about it ? Never touch any useable stuff when going into Betamode :smileygrin:
And another one : Don't touch Server 2 :smileycool: with critical data.
Solution : Restore your VM's.
Hope it can be of some help
I ran into the same problem after moving a VM from Workstation 6.02 to Server Beta 2. After comparing the files, it appears that Server adds a couple of extra lines that Workstation doesn't use. When these lines are added the error "unable to open network mapping library" is shown.
To correct the problem, simply remiove the 2 lines below from your VMX file
ethernet0.features = "1"
ethernet0.networkName = "Bridged"
I am pretty sure the real culprit is the "ethernet0.networkName = "Bridged""
Quote : "To correct the problem, simply remiove the 2 lines below from your VMX file"
Which I can confirm will solve the problem too. :smileyblush:
I confirm same behavior and same solution onto a Windows Vista Enterprise 32-bit.
Thank you for documenting this.
RoarinPenguin
I used VMWare Server 2.0 to create Ubuntu VM out of ISO, and then got VMWare Player to start VMX file.
I was getting the error and followed instructions to remove those 2 extra lines.
Everything is workie now and thanks to everybody for help! I wish if I just understood better why. I think that server is actually writing the config file (bridged network type) - which is causing the problem, since the player just has the information already written to it. Once it tries to read the line (bridged) that's where it "blows up"... Dunno, just an opinion...
Good luck everyone!
Z
Hey Guys,
Thanks for this post. I had a problem running Server 1.05 and Beta 2 on a Vista x64 host, so I installed Workstation 6 and imported the guest (XP SP2) from Server 1.05. When I launched the guest, the NIC is disconnected.
To resolve:
1. Shut down the guest
2. I removed the 2 previously mentioned lines from the .vmx file
3. Delete the NIC in the guest OS settings
4. Create a new NIC
5. Restart the guest
Hope this helps.
Thanks guys (and gals)!!!!
Matt...
You're completely correct.
Changing
ethernet0.networkName = "Bridged"
to
ethernet0.networkName = ""
is sufficient to get theVM started.
Cheers
Uwe