This script performs backups of virtual machines residing on ESX(i) 3.5/4.x/5.x/6.x/7.x servers using methodology similar to VMware's VCB tool. The script takes snapshots of live running virtual machines, backs up the master VMDK(s) and then upon completion, deletes the snapshot until the next backup. The only caveat is that it utilizes resources available to the Service Console of the ESX server or Busybox Console (Tech Support Mode) of the ESXi server running the backups as opposed to following the traditional method of offloading virtual machine backups through a VCB proxy.
This script has been tested on ESX 3.5/4.x/5.x and ESXi 3.5/4.x/5.x/6.x/7.x and supports the following backup mediums: LOCAL STORAGE, SAN and NFS. The script is non-interactive and can be setup to run via cron. Currently, this script accepts a text file that lists the display names of virtual machine(s) that are to be backed up. Additionally, one can specify a folder containing configuration files on a per VM basis for granular control over backup policies.
Additionally, for ESX(i) environments that don't have persistent NFS datastores designated for backups, the script offers the ability to automatically connect the ESX(i) server to a NFS exported folder and then upon backup completion, disconnect it from the ESX(i) server. The connection is established by creating an NFS datastore link which enables monolithic (or thick) VMDK backups as opposed to using the usual *nix mount command which necessitates breaking VMDK files into the 2gbsparse format for backup. Enabling this mode is self-explanatory and will evidently be so when editing the script (Note: VM_BACKUP_VOLUME variable is ignored if ENABLE_NON_PERSISTENT_NFS=1 ).
In its current configuration, the script will allow up to 3 unique backups of the Virtual Machine before it will overwrite the previous backups; this however, can be modified to fit procedures if need be. Please be diligent in running the script in a test or staging environment before using it on production live Virtual Machines; this script functions well within our environment but there is a chance that it may not fit well into other environments.
If you have any questions, you may post in the dedicated ghettoVCB VMTN community group.
If you have found this script to be useful and would like to contribute back, please click here to donate.
Please read ALL documentation + FAQ's before posting a question about an issue or problem. Thank You
1) Download ghettoVCB from github by clicking on the ZIP button at the top and upload to either your ESX or ESXi system (use scp or WinSCP to transfer the file)
2) Extract the contents of the zip file (filename will vary):
# unzip ghettoVCB-master.zip
Archive: ghettoVCB-master.zip
creating: ghettoVCB-master/
inflating: ghettoVCB-master/README
inflating: ghettoVCB-master/ghettoVCB-restore.sh
inflating: ghettoVCB-master/ghettoVCB-restore_vm_restore_configuration_template
inflating: ghettoVCB-master/ghettoVCB-vm_backup_configuration_template
inflating: ghettoVCB-master/ghettoVCB.conf
inflating: ghettoVCB-master/ghettoVCB.sh
3) The script is now ready to be used and is located in a directory named ghettoVCB-master
# ls -l
-rw-r--r-- 1 root root 281 Jan 6 03:58 README
-rw-r--r-- 1 root root 16024 Jan 6 03:58 ghettoVCB-restore.sh
-rw-r--r-- 1 root root 309 Jan 6 03:58 ghettoVCB-restore_vm_restore_configuration_template
-rw-r--r-- 1 root root 356 Jan 6 03:58 ghettoVCB-vm_backup_configuration_template
-rw-r--r-- 1 root root 631 Jan 6 03:58 ghettoVCB.conf
-rw-r--r-- 1 root root 49375 Jan 6 03:58 ghettoVCB.sh
4) Before using the scripts, you will need to enable the execute permission on both ghettoVCB.sh and ghettoVCB-restore.sh by running the following:
chmod +x ghettoVCB.shchmod +x ghettoVCB-restore.sh
The following variables need to be defined within the script or in VM backup policy prior to execution.
Defining the backup datastore and folder in which the backups are stored (if folder does not exist, it will automatically be created):
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
Defining the backup disk format (zeroedthick, eagerzeroedthick, thin, and 2gbsparse are available):
DISK_BACKUP_FORMAT=thin
Note: If you are using the 2gbsparse on an ESXi 5.1 host, backups may fail. Please download the latest version of the ghettoVCB script which automatically resolves this or take a look at this article for the details.
Defining the backup rotation per VM:
VM_BACKUP_ROTATION_COUNT=3
Defining whether the VM is powered down or not prior to backup (1 = enable, 0 = disable):
Note: VM(s) that are powered off will not require snapshoting
POWER_VM_DOWN_BEFORE_BACKUP=0
Defining whether the VM can be hard powered off when "POWER_VM_DOWN_BEFORE_BACKUP" is enabled and VM does not have VMware Tools installed
ENABLE_HARD_POWER_OFF=0
If "ENABLE_HARD_POWER_OFF" is enabled, then this defines the number of (60sec) iterations the script will before executing a hard power off when:
ITER_TO_WAIT_SHUTDOWN=3
The number (60sec) iterations the script will wait when powering off the VM and will give up and ignore the particular VM for backup:
POWER_DOWN_TIMEOUT=5
The number (60sec) iterations the script will wait when taking a snapshot of a VM and will give up and ignore the particular VM for backup:
Note: Default value should suffice
SNAPSHOT_TIMEOUT=15
Defining whether or not to enable compression (1 = enable, 0 = disable):
ENABLE_COMPRESSION=0
NOTE: With ESXi 3.x/4.x/5.x, there is a limitation of the maximum size of a VM for compression within the unsupported Busybox Console which should not affect backups running classic ESX 3.x,4.x or 5.x. On ESXi 3.x the largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
Defining the adapter type for backed up VMDK (DEPERCATED - NO LONGER NEEDED😞
ADAPTER_FORMAT=buslogic
Defining whether virtual machine memory is snapped and if quiescing is enabled (1 = enable, 0 = disable):
Note: By default both are disabled
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
NOTE: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relevant to the actual snapshot and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
Defining VMDK(s) to backup from a particular VM either a list of vmdks or "all"
VMDK_FILES_TO_BACKUP="myvmdk.vmdk"
Defining whether or not VM(s) with existing snapshots can be backed up. This flag means it will CONSOLIDATE ALL EXISTING SNAPSHOTS for a VM prior to starting the backup (1 = yes, 0 = no):
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
Defining the order of which VM(s) should be shutdown first, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_SHUTDOWN_ORDER=vm1,vm2,vm3
Defining the order of VM(s) that should be started up first after backups have completed, especially if there is a dependency between multiple VM(s). This should be a comma seperate list of VM(s)
VM_STARTUP_ORDER=vm3,vm2,vm1
Defining NON-PERSISTENT NFS Backup Volume (1 = yes, 0 = no):
ENABLE_NON_PERSISTENT_NFS=0
NOTE: This is meant for environments that do not want a persisted connection to their NFS backup volume and allows the NFS volume to only be mounted during backups. The script expects the following 5 variables to be defined if this is to be used: UNMOUNT_NFS, NFS_SERVER, NFS_MOUNT, NFS_LOCAL_NAME and NFS_VM_BACKUP_DIR
Defining whether or not to unmount the NFS backup volume (1 = yes, 0 = no):
UNMOUNT_NFS=0
Defining the NFS server address (IP/hostname):
NFS_SERVER=172.51.0.192
Defining the NFS export path:
NFS_MOUNT=/upload
Defining the NFS datastore name:
NFS_LOCAL_NAME=backup
Defining the NFS backup directory for VMs:
NFS_VM_BACKUP_DIR=mybackups
NOTE: Only supported if you are running vSphere 4.1 and this feature is experimental. If you are having issues with sending mail, please take a look at Email Backup Log section
Defining whether or not to email backup logs (1 = yes, 0 = no):
EMAIL_LOG=1
Defining whether or not to email message will be deleted off the host whether it is successful in sending, this is used for debugging purposes. (1 = yes, 0 = no):
EMAIL_DEBUG=1
Defining email server:
EMAIL_SERVER=auroa.primp-industries.com
Defining email server port:
EMAIL_SERVER_PORT=25
Defining email delay interval (useful if you have slow SMTP server and would like to include a delay in netcat using -i param, default is 1second):
EMAIL_DELAY_INTERVAL=1
Defining recipient of the email:
EMAIL_TO=auroa@primp-industries.com
Defining from user which may require specific domain entry depending on email server configurations:
EMAIL_FROM=root@ghettoVCB
Defining to support RSYNC symbolic link creation (1 = yes, 0 = no):
RSYNC_LINK=0
Note: This enables an automatic creation of a generic symbolic link (both a relative & absolution path) in which users can refer to run replication backups using rsync from a remote host. This does not actually support rsync backups with ghettoVCB. Please take a look at the Rsync Section of the documentation for more details.
# cat ghettoVCB.conf
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=3
POWER_DOWN_TIMEOUT=5
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP=0
ENABLE_NON_PERSISTENT_NFS=0
UNMOUNT_NFS=0
NFS_SERVER=172.30.0.195
NFS_MOUNT=/nfsshare
NFS_LOCAL_NAME=nfs_storage_backup
NFS_VM_BACKUP_DIR=mybackups
SNAPSHOT_TIMEOUT=15
EMAIL_LOG=0
EMAIL_SERVER=auroa.primp-industries.com
EMAIL_SERVER_PORT=25
EMAIL_DELAY_INTERVAL=1
EMAIL_TO=auroa@primp-industries.com
EMAIL_FROM=root@ghettoVCB
WORKDIR_DEBUG=0
VM_SHUTDOWN_ORDER=
VM_STARTUP_ORDER=
To override any existing configurations within the ghettoVCB.sh script and to use a global configuration file, user just needs to specify the new flag -g and path to global configuration file (For an example, please refer to the sample execution section of the documenation)
Running multiple instances of ghettoVCB is now supported with the latest release by specifying the working directory (-w) flag.
By default, the working directory of the ghettoVCB instance is /tmp/ghettoVCB.work and you can run another instance by providing an alternate working directory. You should try to minimize the number of ghettoVCB instances running on your ESXi host as it does consume some amount of resources when running in the ESXi Shell. This is considered an experimental feature, so please test in a development environment to ensure everything is working prior to moving to production system.
Ensure that you do not edit past this section:
########################## DO NOT MODIFY PAST THIS LINE ##########################
# ./ghettoVCB.sh
###############################################################################
#
# ghettoVCB for ESX/ESXi 3.5, 4.x+ and 5.x
# Author: William Lam
# http://www.virtuallyghetto.com/
# Documentation: http://communities.vmware.com/docs/DOC-8760
# Created: 11/17/2008
# Last modified: 2012_12_17 Version 0
#
###############################################################################
Usage: ghettoVCB.sh [options]
OPTIONS:
-a Backup all VMs on host
-f List of VMs to backup
-m Name of VM to backup (overrides -f)
-c VM configuration directory for VM backups
-g Path to global ghettoVCB configuration file
-l File to output logging
-w ghettoVCB work directory (default: )
-d Debug level [info|debug|dryrun] (default: info)
(e.g.)
Backup VMs stored in a list
./ghettoVCB.sh -f vms_to_backup
Backup a single VM
./ghettoVCB.sh -m vm_to_backup
Backup all VMs residing on this host
./ghettoVCB.sh -a
Backup all VMs residing on this host except for the VMs in the exclusion list
./ghettoVCB.sh -a -e vm_exclusion_list
Backup VMs based on specific configuration located in directory
./ghettoVCB.sh -f vms_to_backup -c vm_backup_configs
Backup VMs using global ghettoVCB configuration file
./ghettoVCB.sh -f vms_to_backup -g /global/ghettoVCB.conf
Output will log to /tmp/ghettoVCB.log (consider logging to local or remote datastore to persist logs)
./ghettoVCB.sh -f vms_to_backup -l /vmfs/volume/local-storage/ghettoVCB.log
Dry run (no backup will take place)
./ghettoVCB.sh -f vms_to_backup -d dryrun
The input to this script is a file that contains the display name of the virtual machine(s) separated by a newline. When creating this file on a non-Linux/UNIX system, you may introduce ^M character which can cause the script to miss-behave. To ensure this does not occur, plesae create the file on the ESX/ESXi host.
Here is a sample of what the file would look like:
[root@himalaya ~]# cat vms_to_backup
vCOPS
vMA
vCloudConnector
Debug Mode
Note: This execution mode provides a qucik summary of details on whether a given set of VM(s)/VMDK(s) will be backed up. It provides additional information such as VMs that may have snapshots, VMDK(s) that are configured as independent disks, or other issues that may cause a VM or VMDK to not backed up.
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d dryrun
Logging output to "/tmp/ghettoVCB-2011-03-13_15-19-57.log" ...
2011-03-13 15:19:57 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:19:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:19:57 -- info: CONFIG - GHETTOVCB_PID = 30157
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:19:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-19-57
2011-03-13 15:19:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:19:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:19:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:19:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:19:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:19:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:19:57 -- info: CONFIG - LOG_LEVEL = dryrun
2011-03-13 15:19:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-19-57.log
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:19:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:19:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:19:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:19:57 -- info:
2011-03-13 15:19:57 -- dryrun: ###############################################
2011-03-13 15:19:57 -- dryrun: Virtual Machine: scofield
2011-03-13 15:19:57 -- dryrun: VM_ID: 704
2011-03-13 15:19:57 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield
2011-03-13 15:19:57 -- dryrun: VMX_CONF: scofield/scofield.vmx
2011-03-13 15:19:57 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:57 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: scofield_3.vmdk 3 GB
2011-03-13 15:19:58 -- dryrun: scofield_2.vmdk 2 GB
2011-03-13 15:19:58 -- dryrun: scofield_1.vmdk 1 GB
2011-03-13 15:19:58 -- dryrun: scofield.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 11 GB
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vMA
2011-03-13 15:19:58 -- dryrun: VM_ID: 1440
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vMA
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vMA/vMA.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:58 -- dryrun: vMA-000002.vmdk 5 GB
2011-03-13 15:19:58 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:58 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 5 GB
2011-03-13 15:19:58 -- dryrun: Snapshots found for this VM, please commit all snapshots before continuing!
2011-03-13 15:19:58 -- dryrun: THIS VIRTUAL MACHINE WILL NOT BE BACKED UP DUE TO EXISTING SNAPSHOTS!
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: ###############################################
2011-03-13 15:19:58 -- dryrun: Virtual Machine: vCloudConnector
2011-03-13 15:19:58 -- dryrun: VM_ID: 2064
2011-03-13 15:19:58 -- dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector
2011-03-13 15:19:58 -- dryrun: VMX_CONF: vCloudConnector/vCloudConnector.vmx
2011-03-13 15:19:58 -- dryrun: VMFS_VOLUME: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:19:58 -- dryrun: VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector.vmdk 3 GB
2011-03-13 15:19:59 -- dryrun: INDEPENDENT VMDK(s):
2011-03-13 15:19:59 -- dryrun: vCloudConnector_1.vmdk 40 GB
2011-03-13 15:19:59 -- dryrun: TOTAL_VM_SIZE_TO_BACKUP: 3 GB
2011-03-13 15:19:59 -- dryrun: Snapshots can not be taken for indepdenent disks!
2011-03-13 15:19:59 -- dryrun: THIS VIRTUAL MACHINE WILL NOT HAVE ALL ITS VMDKS BACKED UP!
2011-03-13 15:19:59 -- dryrun: ###############################################
2011-03-13 15:19:59 -- info: ###### Final status: OK, only a dryrun. ######
2011-03-13 15:19:59 -- info: ============================== ghettoVCB LOG END ================================
In the example above, we have 3 VMs to be backed up:
Note: This execution modes provides more in-depth information about environment/backup process including additional storage debugging information which provides information about both the source/destination datastore pre and post backups. This can be very useful in troubleshooting backups
[root@himalaya ghettoVCB]# ./ghettoVCB.sh -f vms_to_backup -d debug
Logging output to "/tmp/ghettoVCB-2011-03-13_15-27-59.log" ...
2011-03-13 15:27:59 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:27:59 -- debug: Succesfully acquired lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:27:59 -- debug: HOST VERSION: VMware ESX 4.1.0 build-260247
2011-03-13 15:27:59 -- debug: HOST LEVEL: VMware ESX 4.1.0 GA
2011-03-13 15:27:59 -- debug: HOSTNAME: himalaya.primp-industries.com
2011-03-13 15:27:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:27:59 -- info: CONFIG - GHETTOVCB_PID = 31074
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:27:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-27-59
2011-03-13 15:27:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:27:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:27:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:27:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:27:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:27:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:27:59 -- info: CONFIG - LOG_LEVEL = debug
2011-03-13 15:27:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-03-13_15-27-59.log
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:27:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:27:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:27:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:27:59 -- info:
2011-03-13 15:28:01 -- debug: Storage Information before backup:
2011-03-13 15:28:01 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:28:01 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:01 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:28:01 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:28:01 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:28:01 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:28:01 -- debug:
2011-03-13 15:28:02 -- info: Initiate backup for scofield
2011-03-13 15:28:02 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_3.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_3.vmdk'...
Clone: 37% done.
2011-03-13 15:28:04 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_2.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 85% done.
2011-03-13 15:28:05 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield_1.vmdk"
2011-03-13 15:28:06 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/scofield/scofield-2011-03-13_15-27-59/scofield.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield.vmdk'...
Clone: 78% done.
2011-03-13 15:29:52 -- info: Backup Duration: 1.83 Minutes
2011-03-13 15:29:52 -- info: Successfully completed backup for scofield!
2011-03-13 15:29:54 -- debug: Storage Information after backup:
2011-03-13 15:29:54 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:54 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:54 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:54 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:54 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:54 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:54 -- debug:
2011-03-13 15:29:55 -- debug: Storage Information before backup:
2011-03-13 15:29:55 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:55 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:55 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:55 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:55 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:55 -- debug:
2011-03-13 15:29:55 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:29:57 -- debug: Storage Information before backup:
2011-03-13 15:29:57 -- debug: SRC_DATASTORE: himalaya-local-SATA.RE4-GP:Storage
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_CAPACITY: 1830.5 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_FREE: 539.4 GB
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_BLOCKSIZE: 4
2011-03-13 15:29:57 -- debug: SRC_DATASTORE_MAX_FILE_SIZE: 1024 GB
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:57 -- debug: DST_DATASTORE: dlgCore-NFS-bigboi.VM-Backups
2011-03-13 15:29:57 -- debug: DST_DATASTORE_CAPACITY: 1348.4 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_FREE: 296.8 GB
2011-03-13 15:29:57 -- debug: DST_DATASTORE_BLOCKSIZE: NA
2011-03-13 15:29:57 -- debug: DST_DATASTORE_MAX_FILE_SIZE: NA
2011-03-13 15:29:57 -- debug:
2011-03-13 15:29:58 -- info: Initiate backup for vCloudConnector
2011-03-13 15:29:58 -- debug: /usr/sbin/vmkfstools -i "/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk" -a "buslogic" -d "thin" "/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vCloudConnector/vCloudConnector-2011-03-13_15-27-59/vCloudConnector.vmdk"
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 97% done.
2011-03-13 15:30:45 -- info: Backup Duration: 47 Seconds
2011-03-13 15:30:45 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:30:45 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:30:45 -- debug: Succesfully removed lock directory - /tmp/ghettoVCB.lock
2011-03-13 15:30:45 -- info: ============================== ghettoVCB LOG END ================================
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup
# ./ghettoVCB.sh -m MyVM
/ghettoVCB # ./ghettoVCB.sh -a
/ghettoVCB # ./ghettoVCB.sh -a -e vm_exclusion_list
1. Create folder to hold individual VM backup policies (can be named anything):
[root@himalaya ~]# mkdir backup_config
2. Create individual VM backup policies for each VM that ensure each file is named exactly as the display name of the VM being backed up (use provided template to create duplicates):
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template scofield
[root@himalaya backup_config]# cp ghettoVCB-vm_backup_configuration_template vCloudConnector
Listing of VM backup policy within backup configuration directory
[root@himalaya backup_config]# ls
scofield vCloudConnector
ghettoVCB-vm_backup_configuration_template
Backup policy for "scofield" (backup only 2 specific VMDKs)
[root@himalaya backup_config]# cat scofield
scofield_2.vmdk,scofield_1.vmdk
VM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Backup policy for VM "vCloudConnector" (backup all VMDKs found)
[root@himalaya backup_config]# cat
vCloudConnectorVM_BACKUP_VOLUME=/vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
vCloudConnector.vmdk
DISK_BACKUP_FORMAT=thin
VM_BACKUP_ROTATION_COUNT=3
POWER_VM_DOWN_BEFORE_BACKUP=0
ENABLE_HARD_POWER_OFF=0
ITER_TO_WAIT_SHUTDOWN=4
POWER_DOWN_TIMEOUT=5
SNAPSHOT_TIMEOUT=15
ENABLE_COMPRESSION=0
VM_SNAPSHOT_MEMORY=0
VM_SNAPSHOT_QUIESCE=0
VMDK_FILES_TO_BACKUP=""
Note: When specifying -c option (individual VM backup policy mode) if a VM is listed in the backup list but DOES NOT have a corresponding backup policy, the VM will be backed up using the default configuration found within the ghettoVCB.sh script.
Execution of backup
[root@himalaya ~]# ./ghettoVCB.sh -f vms_to_backup -c backup_config -l /tmp/ghettoVCB.log
2011-03-13 15:40:50 -- info: ============================== ghettoVCB LOG START ==============================
2011-03-13 15:40:51 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//scofield
2011-03-13 15:40:51 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:51 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:51 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:51 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:51 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:51 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:51 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:51 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:51 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:51 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:51 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:51 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:51 -- info: CONFIG - VMDK_FILES_TO_BACKUP = scofield_2.vmdk,scofield_1.vmdk
2011-03-13 15:40:51 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:51 -- info:
2011-03-13 15:40:53 -- info: Initiate backup for scofield
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_2.vmdk'...
Clone: 100% done.
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/scofield/scofield_1.vmdk'...
Clone: 100% done.
2011-03-13 15:40:55 -- info: Backup Duration: 2 Seconds
2011-03-13 15:40:55 -- info: Successfully completed backup for scofield!
2011-03-13 15:40:57 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:57 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:57 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:57 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:57 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:57 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:57 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-03-13 15:40:57 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:57 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:57 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:57 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:57 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:57 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-03-13 15:40:57 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:57 -- info:
2011-03-13 15:40:59 -- info: Snapshot found for vMA, backup will not take place
2011-03-13 15:40:59 -- info: CONFIG - USING CONFIGURATION FILE = backup_config//vCloudConnector
2011-03-13 15:40:59 -- info: CONFIG - VERSION = 2011_03_13_1
2011-03-13 15:40:59 -- info: CONFIG - GHETTOVCB_PID = 2967
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2011-03-13 15:40:59 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-03-13_15-40-50
2011-03-13 15:40:59 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-03-13 15:40:59 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-03-13 15:40:59 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-03-13 15:40:59 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4
2011-03-13 15:40:59 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-03-13 15:40:59 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-03-13 15:40:59 -- info: CONFIG - LOG_LEVEL = info
2011-03-13 15:40:59 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2011-03-13 15:40:59 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2011-03-13 15:40:59 -- info: CONFIG - VMDK_FILES_TO_BACKUP = vCloudConnector.vmdk
2011-03-13 15:40:59 -- info: CONFIG - EMAIL_LOG = 0
2011-03-13 15:40:59 -- info:
2011-03-13 15:41:01 -- info: Initiate backup for vCloudConnector
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/himalaya-local-SATA.RE4-GP:Storage/vCloudConnector/vCloudConnector.vmdk'...
Clone: 100% done.
2011-03-13 15:41:51 -- info: Backup Duration: 50 Seconds
2011-03-13 15:41:51 -- info: WARN: vCloudConnector has some Independent VMDKs that can not be backed up!
2011-03-13 15:41:51 -- info: ###### Final status: ERROR: Only some of the VMs backed up, and some disk(s) failed! ######
2011-03-13 15:41:51 -- info: ============================== ghettoVCB LOG END ================================
Please take a look at FAQ #25 for more details before continuing
To make use of this feature, modify the variable ENABLE_COMPRESSION from 0 to 1. Please note, do not mix uncompressed backups with compressed backups. Ensure that directories selected for backups do not contain any backups with previous versions of ghettoVCB before enabling and implementing the compressed backups feature.
nc (netcat) utility must be present for email support to function, this utility is a now a default with the release of vSphere 4.1 or greater, previous releases of VI 3.5 and/or vSphere 4.0 does not contain this utility. The reason this is listed as experimental is it may not be compatible with all email servers as the script utlizes nc (netcat) utility to communicate to an email server. This feature is provided as-is with no guarantees. If you enable this feature, a separate log will be generated along side any normal logging which will be used to email recipient. If for whatever reason, the email fails to send, an entry will appear per the normal logging mechanism.
Users should also make note due to limited functionality of netcat, it uses SMTP pipelining which is not the most ideal method of communicating with an SMTP server. Email from ghettoVCB may not work if your email server does not support this feature.
You can define an email recipient in the following two ways:
EMAIL_TO=william@virtuallyghetto.com
OR
EMAIL_TO=william@virtuallyghetto.com,tuan@virtuallyghetto.com
If you are running ESXi 5.1, you will need to create a custom firewall rule to allow your email traffic to go out which I will assume is default port 25. Here are the steps for creating a custom email rule.
Step 1 - Create a file called /etc/vmware/firewall/email.xml with contains the following:
<ConfigRoot>
<service>
<id>email</id>
<rule id="0000">
<direction>outbound</direction>
<protocol>tcp</protocol>
<porttype>dst</porttype>
<port>25</port>
</rule>
<enabled>true</enabled>
<required>false</required>
</service>
</ConfigRoot>
Step 2 - Reload the ESXi firewall by running the following ESXCLI command:
~ #
esxcli network firewall refresh
Step 3 - Confirm that your email rule has been loaded by running the following ESXCLI command:
~ # esxcli network firewall ruleset list | grep email
email true
Step 4 - Connect to your email server by usingn nc (netcat) by running the following command and specifying the IP Address/Port of your email server:
~ # nc 172.30.0.107 25
220 mail.primp-industries.com ESMTP Postfix
You should recieve a response from your email server and you can enter Ctrl+C to exit. This custom ESXi firewall rule will not persist after a reboot, so you should create a custom VIB to ensure it persists after a system reboot. Please take a look at this article for the details.
To make use of this feature, modify the variable RSYNC_LINK from 0 to 1. Please note, this is an experimental feature request from users that rely on rsync to replicate changes from one datastore volume to another datastore volume. The premise of this feature is to have a standardized folder that rsync can monitor for changes to replicate to another backup datastore. When this feature is enabled, a symbolic link will be generated with the format of "<VMNAME>-symlink" and will reference the latest successful VM backup. You can then rely on this symbolic link to watch for changes and replicate to your backup datastore.
Here is an example of what this would look like:
[root@himalaya ghettoVCB]# ls -la /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/
total 0
drwxr-xr-x 1 nobody nobody 110 Sep 27 08:08 .
drwxr-xr-x 1 nobody nobody 17 Sep 16 14:01 ..
lrwxrwxrwx 1 nobody nobody 89 Sep 27 08:08 vcma-symlink -> /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/WILLIAM_BACKUPS/vcma/vcma-2010-09-27_08-07-37
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:04 vcma-2010-09-27_08-04-26
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:06 vcma-2010-09-27_08-05-55
drwxr-xr-x 1 nobody nobody 58 Sep 27 08:08 vcma-2010-09-27_08-07-37
FYI - This feature has not been tested, please provide feedback if this does not work as expected.
To recover a VM that has been processed by ghettoVCB, please take a look at this document: Ghetto Tech Preview - ghettoVCB-restore.sh - Restoring VM's backed up from ghettoVCB to ESX(i) 3.5, ...
There may be a situation where you need to stop the ghettoVCB process and entering Ctrl+C will only kill off the main ghettoVCB process, however there may still be other spawn processes that you may need to identify and stop. Below are two scenarios you may encounter and the process to completely stop all processes related to ghettoVCB.
Step 1 - Press Ctrl+C which will kill off the main ghettoVCB instance
Step 2 - Search for any existing ghettoVCB process by running the following:
# ps -c | grep ghettoVCB | grep -v grep
3360136 3360136 tail tail -f /tmp/ghettoVCB.work/ghettovcb.Cs1M1x
Step 3 - Here we can see there is a tail command that was used in the script. We need to stop this process by using the kill command which accepts the PID (Process ID) which is identified by the first value on the far left hand side of the command. In this example, it is 3360136.
# kill -9 3360136
Note: Make sure you identify the correct PID, else you could accidently impact a running VM or worse your ESXi host.
Step 4 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Step 1 - Search for the ghettoVCB process (you can also validate the PID from the logs)
~ # ps -c | grep ghettoVCB | grep -v grep
3360393 3360393 busybox ash ./ghettoVCB.sh -f list -d debug
3360790 3360790 tail tail -f /tmp/ghettoVCB.work/ghettovcb.deGeB7
Step 2 - Stop both the main ghettoVCB instance & tail command by using the kill command and specifying their respective PID IDs:
kill -9 3360393
kill -9 3360790
Step 3 - If a VM was in the process of being backed up, there is an additional process for the actual vmkfstools copy. You will need to identify the process for that and kill that as well. We will again use ps -c command and search for any vmkfstools that are running:
# ps -c | grep vmkfstools | grep -v grep
3360796 3360796 vmkfstools /sbin/vmkfstools -i /vmfs/volumes/himalaya-temporary/VC-Windows/VC-Windows.vmdk -a lsilogic -d thin /vmfs/volumes/test-dont-use-this-volume/backups/VC-Windows/VC-Windows-2013-01-26_16-45-35/VC-Windows.vmdk
Step 4 - In case there is someone manually running a vmkfstools, make sure you take a look at the command itself and that it maps back to the current VM that was being backed up before kill the process. Once you have identified the proper PID, go ahead and use the kill command:
# kill -9 3360796
Step 5 - Depending on where you stopped the ghettoVCB process, you may need to consolidate or remove any existing snapshots that may exist on the VM that was being backed up. You can easily do so by using the vSphere Client.
Please take a moment to read over what is a cronjob and how to set one up, before continuing
The task of configuring cronjobs on classic ESX servers (with Service Console) is no different than traditional cronjobs on *nix operating systems (this procedure is outlined in the link above). With ESXi on the other hand, additional factors need to be taken into account when setting up cronjobs in the limited shell console called Busybox because changes made do not persist through a system reboot. The following document will outline steps to ensure that cronjob configurations are saved and present upon a reboot.
Important Note: Always redirect the ghettoVCB output to /dev/null and/or to a log when automating via cron, this becomes very important as one user has identified a limited amount of buffer capacity in which once filled, may cause ghettoVCB to stop in the middle of a backup. This primarily only affects users on ESXi, but it is good practice to always redirect the output. Also ensure you are specifying the FULL PATH when referencing the ghettoVCB script, input or log files.
e.g.
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /dev/null
or
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /tmp/ghettoVCB.log
Task: Configure ghettoVCB.sh to execute a backup five days a week (M-F) at 12AM (midnight) everyday and send output to a unique log file
Configure on ESX:
1. As root, you'll install your cronjob by issuing:
[root@himalaya ~]# crontab -e
2. Append the following entry:
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
3. Save and exit
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -e
no crontab for root - using an empty one
crontab: installing new crontab
4. List out and verify the cronjob that was just created:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# crontab -l
0 0 * * 1-5 /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB.sh -f /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/backuplist > /vmfs/volumes/dlgCore-NFS-bigboi.VM-Backups/ghettoVCB-backup-$(date +\%s).log
You're ready to go!
Configure on ESXi:
1. Setup the cronjob by appending the following line to /var/spool/cron/crontabs/root:
0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-$(date +\%s).log
If you are unable to edit/modify /var/spool/cron/crontabs/root, please make a copy and then edit the copy with the changes
cp /var/spool/cron/crontabs/root /var/spool/cron/crontabs/root.backup
Once your changes have been made, then "mv" the backup to the original file. This may occur on ESXi 4.x or 5.x hosts
mv /var/spool/cron/crontabs/root.backup /var/spool/cron/crontabs/root
You can now verify the crontab entry has been updated by using "cat" utility.
2. Kill the current crond (cron daemon) and then restart the crond for the changes to take affect:
On ESXi < 3.5u3
kill $(ps | grep crond | cut -f 1 -d ' ')
On ESXi 3.5u3+
~ # kill $(pidof crond)
~ # crond
On ESXi 4.x/5.0
~ # kill $(cat /var/run/crond.pid)
~ # busybox crond
On ESXi 5.1 to 6.x
~ # kill $(cat /var/run/crond.pid)
~ # crond
On ESXi 7.x
~ # kill $(cat /var/run/crond.pid)
~ # /usr/lib/vmware/busybox/bin/busybox crond
3. Now that the cronjob is ready to go, you need to ensure that this cronjob will persist through a reboot. You'll need to add the following two lines to /etc/rc.local (ensure that the cron entry matches what was defined above). In ESXi 5.1, you will need to edit /etc/rc.local.d/local.sh instead of /etc/rc.local as that is no longer valid.
On ESXi 3.5
/bin/kill $(pidof crond)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 4.x/5.0
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
On ESXi 5.1 to 6.x
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
crond
On ESXi 7.x
/bin/kill $(cat /var/run/crond.pid) > /dev/null 2>&1
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/usr/lib/vmware/busybox/bin/busybox crond
Afterwards the file should look like the following:
~ # cat /etc/rc.local
#! /bin/ash
export PATH=/sbin:/bin
log() {
echo "$1"
logger init "$1"
}
#execute all service retgistered in /etc/rc.local.d
if [http:// -d /etc/rc.local.d |http:// -d /etc/rc.local.d ]; then
for filename in `find /etc/rc.local.d/ | sort`
do
if [ -f $filename ] && [ -x $filename ]; then
log "running $filename"
$filename
fi
done
fi
/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 * * 1-5 /vmfs/volumes/simplejack-local-storage/ghettoVCB.sh -f /vmfs/volumes/simplejack-local-storage/backuplist > /vmfs/volumes/simplejack-local-storage/ghettoVCB-backup-\$(date +\\%s).log" >> /var/spool/cron/crontabs/root
/bin/busybox crond
This will ensure that the cronjob is re-created upon a reboot of the system through a startup script
2. To ensure that this is saved in the ESXi configuration, we need to manually initiate an ESXi backup by running:
~ # /sbin/auto-backup.sh
config implicitly loaded
local.tgz
etc/vmware/vmkiscsid/vmkiscsid.db
etc/dropbear/dropbear_dss_host_key
etc/dropbear/dropbear_rsa_host_key
etc/opt/vmware/vpxa/vpxa.cfg
etc/opt/vmware/vpxa/dasConfig.xml
etc/sysconfig/network
etc/vmware/hostd/authorization.xml
etc/vmware/hostd/hostsvc.xml
etc/vmware/hostd/pools.xml
etc/vmware/hostd/vmAutoStart.xml
etc/vmware/hostd/vmInventory.xml
etc/vmware/hostd/proxy.xml
etc/vmware/ssl/rui.crt
etc/vmware/ssl/rui.key
etc/vmware/vmkiscsid/initiatorname.iscsi
etc/vmware/vmkiscsid/iscsid.conf
etc/vmware/vmware.lic
etc/vmware/config
etc/vmware/dvsdata.db
etc/vmware/esx.conf
etc/vmware/license.cfg
etc/vmware/locker.conf
etc/vmware/snmp.xml
etc/group
etc/hosts
etc/inetd.conf
etc/rc.local
etc/chkconfig.db
etc/ntp.conf
etc/passwd
etc/random-seed
etc/resolv.conf
etc/shadow
etc/sfcb/repository/root/interop/cim_indicationfilter.idx
etc/sfcb/repository/root/interop/cim_indicationhandlercimxml.idx
etc/sfcb/repository/root/interop/cim_listenerdestinationcimxml.idx
etc/sfcb/repository/root/interop/cim_indicationsubscription.idx
Binary files /etc/vmware/dvsdata.db and /tmp/auto-backup.31345.dir/etc/vmware/dvsdata.db differ
config implicitly loaded
Saving current state in /bootbank
Clock updated.
Time: 20:40:36 Date: 08/14/2009 UTC
Now you're really done!
If you're still having trouble getting the cronjob to work, ensure that you've specified the correct parameters and there aren’t any typos in any part of the syntax.
Ensure crond (cron daemon) is running:
ESX 3.x/4.0:
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# ps -ef | grep crond | grep -v grep
root 2625 1 0 Aug13 ? 00:00:00 crond
ESXi 3.x/4.x/5.x:
~ # ps | grep crond | grep -v grep
5196 5196 busybox crond
Ensure that the date/time on your ESX(i) host is setup correctly:
ESX(i):
[root@himalaya dlgCore-NFS-bigboi.VM-Backups]# date
Fri Aug 14 23:44:47 PDT 2009
Note: Careful attention must be noted if more than one backup is performed per day. Backup windows should be staggered to avoid contention or saturation of resources during these periods.
0Q: I'm getting error X when using the script or I'm not getting any errors, the backup didn’t even take place. What can I do?
0A: First off, before posting a comment/question, please thoroughly read through the ENTIRE documentation including the FAQs to see if your question has already been ansered.
1Q: I've read through the entire documentation + FAQs and still have not found my answer to the problem I'm seeing. What can I do?
1A: Please join the ghettoVCB Group to post your question/comment.
2Q: I've sent you private message or email but I haven't received a response? What gives?
2A: I do not accept issues/bugs reported via PM or email, I will reply back, directing you to post on the appropriate VMTN forum (that's what it's for). If the data/results you're providing is truely senstive to your environment I will hear you out, but 99.99% it is not, so please do not messsage/email me directly. I do monitor all forums that contain my script including the normal VMTN forums and will try to get back to your question as soon as I can and as time permits. Please do be patient as you're not the only person using the script (600,000+ views), thank you.
3Q: Can I schedule backups to take place hourly, daily, monthly, yearly?
3A: Yes, do a search online for crontab.
4Q: I would like to setup cronjob for ESX(i) 3.5 or 4.0?
4A: Take a look at the Cronjob FAQ section in this document.
5Q: I want to schedule my backup on Windows, how do I do this?
5A: Do a search for plink. Make sure you have paired SSH keys setup between your Windows system and ESX/ESXi host.
6Q: I only have a single ESXi host. I want to take backups and store them somewhere else. The problem is: I don't have NFS, iSCSI nor FC SAN. What can I do?
6A: You can use local storage to store your backups assuming that you have enough space on the destination datastore. Afterwards, you can use scp (WinSCP/FastSCP) to transfer the backups from the ESXi host to your local desktop.
7Q: I’m pissed; the backup is taking too long. My datastore is of type X?
7A: YMMV, take a look at your storage configuration and make sure it is optimized.
8Q: I noticed that the backup rotation is occurring after a backup. I don't have enough local storage space, can the process be changed?
8A: This is primarily done to ensure that you have at least one good backup in case the new backup fails. If you would like to modify the script, you're more than welcome to do so.
9Q: What is the best storage configuration for datastore type X?
9A: Search the VMTN forums; there are various configurations for the different type of storage/etc.
10Q: I want to setup an NFS server to run my backups. Which is the best and should it be virtual or physical?
10A: Please refer to answer 7A. From experience, we’ve seen physical instances of NFS servers to be faster than their virtual counterparts. As always, YMMV.
11Q: I have VMs that have snapshots. I want to back these things up but the script doesn’t let me do it. How do I fix that?
11A: VM snapshots are not meant to be kept for long durations. When backing up a VM that contains a snapshot, you should ensure all snapshots have been committed prior to running a backup. No exceptions will be made…ever.
12Q: I would like to restore from backup, what is the best method?
12A: The restore process will be unique for each environment and should be determined by your backup/recovery plans. At a high level you have the option of mounting the backup datastore and registering the VM in question or copy the VM from the backup datastore to the ESX/ESXi host. The latter is recommended so that you're not running a VM living on the backup datastore or inadvertently modifying your backup VM(s). You can also take a look at ghettoVCB-restore which is experimentally supported.
13Q: When I try to run the script I get: "-bash: ./ghettoVCB.sh: Permission denied", what is wrong?
13A: You need to change the permission on the script to be executable, chmod +x ghettoVCB.sh
14Q: Where can I download the latest version of the script?
14A: The latest version is available on on github - https://github.com/lamw/ghettoVCB/downloads
15Q: I would like to suggest/recommend feature X, can I get it? When can I get it? Why isn't it here, what gives?
15A: The general purpose of this script is to provide a backup solution around VMware VMs. Any additional features outside of that process will be taken into consideration depending on the amount of time, number of requests and actual usefulness as a whole to the community rather than to an individual.
16Q: I have found this script to be very useful and would like to contribute back, what can I do?
16A: To continue to develop and share new scripts and resources with the community, we need your support. You can donate here Thank You!
17Q: What are the different type of backup uses cases that are supported with ghettoVCB?
17A: 1) Live backup of VM with the use of a snapshot and 2) Offline backup of a VM without a snapshot. These are the only two use cases supported by the script.
18Q: When I execute the script on ESX(i) I get some funky errors such as ": not found.sh" or "command not found". What is this?
18A: Most likely you have some ^M characters within the script which may have come from either editing the script using Windows editor, uploading the script using the datastore browser OR using wget. The best option is to either using WinSCP on Windows to upload the script and edit using vi editor on ESX(i) host OR Linux/UNIX scp to copy the script into the host. If you still continue to have the issue, do a search online on various methods of removing this Windows return carriage from the script
19Q: My backup works fine OR it works for a single backup but I get an error message "Input/output error" or "-ash: YYYY-MM-DD: not found" during the snapshot removal process. What is this?
19A: The issue has been recently identified by few users as a problem with user's NFS server in which it reports an error when deleting large files that take longer than 10seconds. VMware has recently released a KB article http://kb.vmware.com/kb/1035332 explaining the details and starting with vSphere 4.1 Update 2 or vSphere 5.0, a new advanced ESX(i) parameter has been introduced to increase the timeout. This has resolved the problem for several users and maybe something to consider if you are running into this issue, specifically with NFS based backups.
20Q: Will this script function with vCenter and DRS enabled?
20Q: No, if the ESX(i) hosts are in a DRS enabled cluster, VMs that are to be backed up could potentially be backed up twice or never get backed up. The script is executed on a per host basis and one would need to come up a way of tracking backups on all hosts and perhaps write out to external file to ensure that all VMs are backed up. The main use case for this script are for standalone ESX(i) host
21Q: I'm trying to use WinSCP to manually copy VM files but it's very slow or never completes on huge files, why is that?
21A: WinSCP was not designed for copying VM files out of your ESX(i) host, take a look at Veeam's FastSCP which is designed for moving VM files and is a free utility.
22Q: Can I use setup NFS Server using Windows Services for UNIX (WSFU) and will it work?
22A: I've only heard a handful of users that have successfully implemented WSFU and got it working, YMMV. VMware also has a KB article decribing the setup process here: http://kb.vmware.com/kb/1004490 for those that are interested. Here is a thread on a user's experience between Windows Vs. Linux NFS that maybe helpful.
23Q: How do VMware Snapshots work?
23A: http://kb.vmware.com/kb/1015180
24Q: What files make up a Virtual Machine?
24A: http://virtualisedreality.wordpress.com/2009/09/16/quick-reminder-of-what-files-make-up-a-virtual-ma...
25Q: I'm having some issues restoring a compressed VM backup?
25A: There is a limitation in the size of the VM for compression under ESXi 3.x & 4.x, this limitation is in the unsupported Busybox console and should not affect classic ESX 3.x/4.x. On ESXi 3.x, the maximum largest supported VM is 4GB for compression and on ESXi 4.x the largest supported VM is 8GB. If you try to compress a larger VM, you may run into issues when trying to extract upon a restore. PLEASE TEST THE RESTORE PROCESS BEFORE MOVING TO PRODUCTION SYSTEMS!
26Q: I'm backing up my VM as "thin" format but I'm still not noticing any size reduction in the backup? What gives?
2bA: Please refer to this blog post which explains what's going on: http://www.yellow-bricks.com/2009/07/31/storage-vmotion-and-moving-to-a-thin-provisioned-disk/
27Q: I've enabled VM_SNAPSHOT_MEMORY and when I restore my VM it's still offline, I thought this would keep it's memory state?
27A: VM_SNAPSHOT_MEMORY is only used to ensure when the snapshot is taken, it's memory contents are also captured. This is only relavent to the actual snapshot itself and it's not used in any shape/way/form in regards to the backup. All backups taken whether your VM is running or offline will result in an offline VM backup when you restore. This was originally added for debugging purposes and in generally should be left disabled
28Q: Can I rename the directories and the VMs after a VM has been backed up?
28A: The answer yes, you can ... but you may run into all sorts of issues which may break the backup process. The script expects a certain layout and specific naming scheme for it to maintain the proper rotation count. If you need to move or rename a VM, please take it out of the directory and place it in another location
29Q: Can ghettoVCB support CBT (Change Block Tracking)?
29A: No, that is a functionality of the vSphere API + VDDK API (vSphere Disk Development Kit). You will need to look at paid solutions such as VMware vDR, Veeam Backup & Recovery, PHD Virtual Backups, etc. to leverage that functionailty.
30Q: Does ghettoVCB support rsync backups?
30A: Currently ghettoVCB does not support rsync backups, you either obtain or compile your own static rsync binary and run on ESXi, but this is an unsupported configuration. You may take a look at this blog post for some details.
31Q: How can I contribute back?
31A: You can provide feedback/comments on the ghettoVCB Group. If you have found this script to be useful and would like to contribute back, please click here to donate.
32Q: How can select individual VMDKs to backup from a VM?
32A: Ideally you would use the "-c" option which requires you to create individual VM configuration file, this is where you would select specific VMDKs to backup. Note, that if you do not need to define all properties, anything not defined will adhere from the default global properties whether you're editing the ghettoVCB.sh script or using ghettoVCB global configuration file. It is not recommended that you edit the ghettoVCB.sh script and modify the VMDK_FILES_TO_BACKUP variable, but if you would like to keep everything in one script, you may add the extensive list of VMDKs to backup but do know this can get error prone as script may be edited frequently and lose some flexibility to support multiple environments.
33Q: Why is email not working when I'm using ESXi 5.x but it worked in ESXi 4.x?
33A: ESXi 5.x has implemented a new firewall which requires the email port that is being used to be opened. Please refer to the following articles on creating a custom firewall rule for email:
http://www.virtuallyghetto.com/2012/09/creating-custom-vibs-for-esxi-50-51.html
How to Create Custom Firewall Rules in ESXi 50
How to Persist Configuration Changes in ESXi 4.x/5.x Part 1
How to Persist Configuration Changes in ESXi 4.x/5.x Part 2
34Q: How do I stop the ghettoVCB process?
34A: Take a look at the Stopping ghettoVCB Process section of the documentation for more details.
Many have asked what is the best configuration and recommendation for setting up a cheap NFS Server to run backups for VMs. This has been a question we've tried to stay away from just because the possiblities and solutions are endless. One can go with physical vs. virtual, use VSA (Virtual Storage Appliances) such as OpenFiler or Lefthand Networks, Windows vs. Linux/UNIX. We've not personally tested and verify all these solutions and it all comes down to "it depends" type of answer. Though from our experience, we've had much better success with a physical server than a virtual.
It is also well known that some users are experiencing backup issues when running specifically against NFS, primarily around the rotation and purging of previous backups. The theory from what we can tell by talking to various users is that when the rotation is occuring, the request to delete the file(s) may take awhile and does not return within a certain time frame and causes the script to error out with unexpected messages. Though the backups were successful, it will cause unexpected results with directory structures on the NFS target. We've not been able to isolate why this is occuring and maybe due to NFS configuration/exports or hardware or connection not being able to support this process.
We'll continue to help where we can in diagonising this issus but we wanted to share our current NFS configuration, perhaps it may help some users who are new or trying to setup their system. ( Disclaimer: These configurations are not recommendations nor endorsement for any of the components being used)
UPDATE: Please also read FAQ #19 for details + resolution
Server Type: Physical
Model: HP DL320 G2
OS: Arch linux 2.6.28
Disks: 2 x 1.5TB
RAID: Software RAID1
Source Host Backups: ESX 3.5u4 and ESX 4.0u1 (We don't run any ESXi hosts)
uname -a output
Linux XXXXX.XXXXX.ucsb.edu 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686 Intel(R) Pentium(R) 4 CPU 3.06GHz GenuineIntel GNU/Linux
NICs:
00:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
00:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
NFS Export Options:
/exports/vm-backups XXX.XXX.XXX.XXX/24(rw,async,all_squash,anonuid=99,anongid=99)
*One important thing to check is to verify that your NFS exportion options are setup correctly, "async" should be configured to ensure that all IO requests are processed and reply back to the client before waiting for the data to be written to the storage.
*Recently VMware released a KB article describing the various "Advanced NFS Options" and their meanings and recommendations: http://kb.vmware.com/kb/1007909 We've not personally had to touch any of these, but for other vendors such as EMC and NetApp, there are some best practices around configuring some of these values depending on the number of NFS volumes or number of ESX(i) host connecting to a volume. You may want to take a look to see if any of these options may help with NFS issue that some are seeing
*Users should also try to look at their ESX(i) host logs during the time interval when they're noticing these issues and see if they can find any correlation along with monitoring the performance on their NFS Server.
*Lastly, there are probably other things that can be done to improve NFS performance or further optimization, a simple search online will also yield many resources.
Windows utility to email ghettoVCB Backup Logs - http://www.waldrondigital.com/2010/05/11/ghettovcb-e-mail-rotate-logs-batch-file-for-vmware/
Windows front-end utility to ghettoVCB - http://www.magikmon.com/mkbackup/ghettovcb.en.html
Note: Neither of these tools are supported, for questions or comments regarding these utilities please refer to the author's pages.
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Enhancements:
Fixes:
Enhancements:
Fixes:
Big thanks to Alain Spineux and his contributions to the ghettoVCB script and helping with debugging and testing.
Enhancements:
Fixes:
Enhancements:
Enhancements:
Enhancements:
Fixes:
Fixes:
Enhancements:
Fixes:
Fixes:
Big thanks goes out to the community for the suggested features and to those that submitted snippet of their modifications.
Updated FAQ #20-24 for common issues/questions. Also included a new section about our "personal" NFS configuration and setup.
Fix the crontab section to reflect the correct syntax + updated FAQ #17,#18 and #19 for common issues.
The following enhancements and fixes have been implemented in this release of ghettoVCB. Special thanks goes out to all the ghettoVCB BETA testers for providing time and their environments to test features/fixes of the new script!
Enhancements:
Fixes:
I would like to be able to power the VM down, take a snapshot, power the VM back up, and take a backup from the "pristine" state that was present at time of the snapshot. I have a hacked version of the script at the moment that is now several revisions/versions behind your copy. This would just be an extension of the power VM off before backup, except it would do a snapshot at power off, automatically power back on, and after a count of X seconds (to give the VM time to restart and settle in) begin making a backup. This would allow the users who want pristine copies (vs quieting the VMs) and can afford a few minutes of downtime rather than waiting for a full power off backup to be done.
@hburroughs:
I did also modify the script for supporting that kind of backup.
Ask lamw to add this feature to future releases.
If enough people ask for it, maybe we will see it in one of the next releases.
Cheers.
Oh, I would like to see that kind of backup in a future release!
Greets
Peter
hburroughs and goppi:
If you have hacked the script to add functionality, perhaps you would post a diff to William's original to pastebin.com?
Your additions sound interesting. That way we could discuss different approaches, and presumably it would be easier for William to incorporate different features.
My own modifications are here: http://pastebin.com/5zRYau9D or here: http://www.idrift.no/gaute/ghettovcb/
Hi it's me again,
the output "Units = cylinders of 2048 ..... " of busyboxs fdisk, does that mean the blocksize?
How can I check the correct blocksize?
In vSphere client is displayed 1 MB for blocksize but I have a capacity of approximately 500 GB in one storage.
There is something wrong, isn't it?
Ok then how can I change the blocksize?
I fear I must reformat the hard drive?!
King regards
Matthias
@gautelund:
Not sure if this is what the author of the script wants.
Looking at this thread I see that he's already investing a lot of time for support which is not directly script related. Making forks of the initial script public would increase this further by people asking questions which are related to problems caused ny mods and have nothing to do with the initial script.
So if anyone is interrested send me a PM and I will PM you the mods but please do not make them publicly available.
Regards,
groppi.
I have a peculiar problem running ghettoVCB on an ESXi 3.5 (build 110271) host with local storage backing up to an NFS share (windows Allegro v5).
The error occurs during the vmkfstools command (line 612 of latest release) for each vmdk on a given virtual machine. Here is the output from a vm named "Radar" that has 3 disks:
2010-03-29 17:53:37 -- info: Initiate backup for Radar 2010-03-29 17:53:37 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-03-29" for Radar Failed to clone disk : The file specified is not a virtual disk (15). Destination disk format: VMFS thick Cloning disk '/vmfs/volumes/main/Radar/Radar_2.vmdk'... Failed to clone disk : The file specified is not a virtual disk (15). Destination disk format: VMFS thick Cloning disk '/vmfs/volumes/main/Radar/Radar_1.vmdk'... Failed to clone disk : The file specified is not a virtual disk (15). Destination disk format: VMFS thick Cloning disk '/vmfs/volumes/main/Radar/Radar.vmdk'... 2010-03-29 17:54:39 -- info: Removing snapshot from Radar ... 2010-03-29 17:54:44 -- info: Backup Duration: 1.12 Minutes 2010-03-29 17:54:44 -- info: Successfully completed backup for Radar!
I have confirmed that I get the same exact error when executing the command manually from a shell:
vmkfstools -i /vmfs/volumes/main/Radar/Radar.vmdk -a lsilogic /vmfs/volumes/backup/Radar/Test/test.vmdk Destination disk format: VMFS thick Cloning disk '/vmfs/volumes/main/Radar/Radar.vmdk'... Failed to clone disk : The file specified is not a virtual disk (15).
What is really strange is that this command DOES create appropriately sized (according to the filesystem) files in the destination directory:
root@latka:/vmfs/volumes/60846bb9-1570a6e2/Radar/Test$ ls -lh -rw-rw-rw- 1 9999 9999 4.0G Mar 30 18:26 test-flat.vmdk -rw-rw-rw- 1 9999 9999 116 Mar 30 18:26 test.vmdk
However, that 4.0G file was created in less than 1 second, which is simply impossible over the network. The resulting test.vmdk does NOT match the original Radar.vmdk (not sure if it is supposed to or not).
original Radar.vmdk:
# Disk DescriptorFile version=1 CID=95352490 parentCID=ffffffff createType="vmfs" # Extent description RW 8388608 VMFS "Radar-flat.vmdk" # The Disk Data Base #DDB ddb.virtualHWVersion = "4" ddb.toolsVersion = "8192" ddb.uuid = "60 00 C2 9d 13 39 65 63-42 06 9c a9 2b 53 4d c3" ddb.geometry.cylinders = "522" ddb.geometry.heads = "255" ddb.geometry.sectors = "63" ddb.adapterType = "buslogic" ddb.geometry.biosCylinders = "522" ddb.geometry.biosHeads = "255" ddb.geometry.biosSectors = "63"
resulting test.vmdk:
# Disk Descriptor file version=1 # Extent description RW 8388608 VMFS "test-flat.vmdk" # The Disk Data Base #DDB
I get this same error on EVERY disk for EVERY virtual machine that is backed up. The resulting backups cannot be restored using ghettoVCB-restore.sh, which is not surprising.
Any assistance would be greatly appreciated!
This is a known problem with Allegro 5 and ESXi.
We already have an incident open with Franz about that issue.
Please report that problem to Franz as well so they are aware that others are also affected.
Switching back to Allegro 4.5 will solve this problem.
Cheers,
groppi.
I'll head over and report the problem to them. Thanks for the quick reply.
If you don't understand what the blocksize is for, please take a look at this VMware KB: http://kb.vmware.com/kb/1003565
It has nothing to do with the actual capacity of your disk, you can configure 1MB blocksize on a 74gb drive or 500gb drive. Please read the KB article for clarification and yes you'll need to re-create the VMFS volume when changing the blocksize.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
What I would like to see right now from the community are ideas/features that you would like to have, based on the feedback and the amount that I receive, we can go about figuring out whether they would be feasible.
If certain feature requests have already been created/hacked together, more than welcome to take a look but I would like that to be kept on a separate thread so that when troubleshooting issues, users are using the current version of the script and not other various/modified versions.
As of now I've seen the following:
Ability to power off VM, offline snapshot and power the VM back on and proceed with the backup.
Global ghettoVCB configuration file
Implementation of some locking mechanism to ensure only 1 ghettoVCB instance can run at any given moment
Support VMs with existing snapshots
Ability to control whether VM backup directories are rotated in general or kept in-definite and leave it to end users to rotate out
I'll continue to update this list as I receive more feedback.
I most likely will be conducting a private BETA for a select few as I've done in the past for previous releases, for those that are interested and has a significantly sized environment to test various functionality/features, shoot me an PM with your Name, Email and Quick summary of the testing environment (ESX(i) version/build, # of VMs, size of VMs, etc)
Thanks again for all the great feedback
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I can confirm that there is a limit on crond which results in evaporation of settings in esxi.
This is why I now use plink from windows
P.S. To all you people out there who, like myself, have been going through the veeam, nfs, scp, woefully slow transfer speeds nightmare - scrap it all!
Centos 5.3 x64 iscsi datastore with 1Gbit nic and ghetto = 100 MB/sec (yes - that is 100 megabytes per second:)
Six commands to configure the target and six clicks to configure the datastore.
If everyone did this the current page would be half its length ;:
Interesting. I could reproduce this once, but after that I tried to add data beyond 512 bytes to the crontab several times, using vi or redirecting, with no problems.
Well, what the hell - 512 bytes ought to be enough for anybody.
You say " one way is just to fully disable this OR by setting a very high count if you don't want any deletion."
Well, I do not want the script to ever rename a past backup directory, which suggests that my only option is to "fully disable" rotation. But how do I do that? I have read the whole script, and can find no means to disable rotation entirely, and clearly setting VM_BACKUP_ROTATION_COUNT=0 would be bad indeed.
Here's the deal: I need to rsync the backups off-site over a slow link. Since ghetoVCB renames the directories when rotating, ALL the backups have to be re-sent, not just the most recent. Can't the script just keep the most recent N backups directories? Why does it have to maintain a rotation count in the directory name at all?
If I could just get ghetoVCB to stop adding a rotation count to the directory, or disable rotation entirely, then I can apply my own rotation logic outside of ghetoVCB, and then my rsync's will work nicely.
Thanks for ghetoVCB. Until I started moving backups off-site, it worked like a charm! Any insight you can provide to my problem would be greatly appreciated.
When I say fully disable, you just need to comment out the function call in which the rotation is checked. If you do 1 backup per day, this should be fine. Though if you do multiple backups per day, the default VM backup directory is not unique enough as it only holds "YYYY-MM-DD" and you will most definitely override any earlier backups.
The whole point of the rename is similar to how system logs are rotated, you want to be able to keep track if you have multiple backups per day to see which is the oldest so you can purge after certain count, hence the additional number is appended in the form of "--X". If you want to suggest an alternative way for this, by all means I'm open to suggestions. This has never been a concern or problem for others, but if it is, I'm always up for improvements. I just need to understand the use case and how a change may affect others/etc.
I can look into setting a configuration param that allows the user to decide whether rotation will be done by the script, but again, there needs to be some uniqueness being created on a per backup basis, else you'll override the previous backup. Perhaps include additional timestamp information (ss:ms) which would help and then maybe purge after n-copies?
Thanks
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
@imorgan + lamw:
We modified the script for exactly the same reason.
As we rsync the ghettoVCB backup folders to external storage, the folder names of the backups must not change, otherwise the same backup folder would be rsynced several times after a rotation took place.
We changed the skrpit in the way that a a backup folder only carries the current date and would not change for rotation. IMHO there is no reason for changing names on rotation. The folder name itslef (the date) is enough to find out which folders are the oldest ones for beeing deleted when rotation takes place.
We do not have the case of multiple backups on the same day which is not covered by this naming scheme, but not a problem anyway as you could simply add a continous number if a folder with the current date already exisits when having multiple backups on the same day.
Regards,
grubi.
So from what I'm hearing, it sounds like for rotation:
1) Flag to disable
2) Flag to enable
In both cases, have some logic to figure out what the next number would be in case user performs multiple backups per day? Or should we screw the numbering and just add on "ss:ms" to ensure uniqueness and then just purge after N where N = max to keep? if we're in scenario #2?
Is that what I'm hearing, that way it won't break things like rsync and probably less work for the rotation function since you don't need to rename directories. Originally I was using that to keep track of the older copies and a way to extract the current count.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello,
Thanks for this work ! It almost work for me but i have a strange issue.
Here is my environement :
Host server : Esxi 4.0 Update 1 (last version)
One virtual Machine, Size : 140Gb
Backup datastore type : NFS. Hosted by a nas appliance (iomega).
Here is the issue. The first backup is taking place, Vm is backuped up on the nas. But when i have a look on the log the last availbale line is --- 2010-03-27 10:15:46 -- info: Removing snapshot from server.mydomain.com ...
Next backup I have this error :
2010-03-29 00:19:02 -- info: Snapshot found for server.mydomain.com, backup will not take place
The intersting thing is no snapshot on the vm when i use vpshere client. If i take a snapshot on the virtual machine a new snapshot appear called : Consolidate Helper - 0
If i remove all snapshot nextime, the backup work but i have the same issue.
Here is a link to my logfile http://pastebin.com/nq9NPNU4
The problem seems to be in snapshot removal, is there something to do ?
Thanks for your help.
Denis.
You're affected by the "NFS" problem, take a look at FAQ #18
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi,
I'm running with lot of troubles ghettoVCB.
I started from scratch, since I had trouble before. I want to backup 3 VM. I'm using a backup config file for one of my VM.
0 23 * * * /vmfs/volumes/datastore1/vmBackup.sh -d debug -f /vmfs/volumes/datastore1/vm_backup_list > /vmfs/volumes/datastore1/ghettoVCB-backup-$(date +\%F).log -c /vmfs/volumes/datastore1/backup_config/
But the first run of this backup only produce a backup for one VM and it didn't compress it.
any idea ?
Hello,
You apparently did not go through the documentation and read the FAQ's, specifically #0 and #1 and since you're using compression, I would also recommend taking a good luck at the compression FAQ's.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi William,
I have a humble suggestion: to add a command line parameter where we can tell the script NOT to remove previous backups of a VM if there was any error condition during the current backup of this VM, but to remove the current failed one instead.
Imagine I have just enough disk space for one complete set of all my VM's, and for making a new set (before the previous is deleted). So my VM_BACKUP_ROTATION_COUNT = 1. Now, if "clone disk" fails for a VM for any reason, I end up with an incomplete new backup, plus my previous good backup is gone (deleted by the script).
As it is now, the script joyfully declares the backup successful, and removes my previous (truly successful) backup. For example:
(...)
Cloning disk '/vmfs/volumes/Raid5/SQLSRV1/SQLSRV1_1.vmdk'...
Clone: 49% done.Failed to clone disk : No space left on device (1835017).
2010-04-01 17:22:00 -- info: Removing snapshot from SQLSRV1 ...
2010-04-01 17:22:05 -- info: Backup Duration: 18.18 Minutes
2010-04-01 17:22:05 -- info: Successfully completed backup for SQLSRV1!
Maybe the script could look for an error condition, and consider the operation failed instead of successful, retaining the previous backups and removing the last instead (when a parameter of your choice is passed, for backward compatibility).
Thank you so much for considering this. My sincere apologies if this has been suggested before, I've tried reading through all comments, but gave up halfway, there are just too many.
Regards,
Ronny
Yes this has been suggested already, take a look at my comment on Mar 30, 2010 1:25 PM
I'll still need to figure out all the logic and the various use cases, but yes, this is something I'll be considering.
Thanks
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hey,
I'm getting an error no matter what VM I try to back up. I'm running the command:
./ghettoVCB.sh -f
(file name has one line, the name of the VM). No matter which I try, I keep getting:
"2010-04-02 21:48:18 -- info: Error: failed to locate and extract VM_ID for FTPServer!"
(FTPServer was the example)
Is there a line I should be changing to tell it where the VMs actually are on the SAN array?
So if you're positive that the VM's displayName is in fact "FTPServer", what you can do to troubleshoot is the following command:
ESX:
vmware-vim-cmd vmsvc/getallvms | grep -i "FTPServer"
ESXi
vim-cmd vmsvc/getallvms | grep -i "FTPServer"
Something should return back with a line that specifies the VM's vmid along with other attributes if in fact this VM exists.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Thanks for that reply, it was very helpful.
It's showing me the VMs from one of the folders we have set up. Is there a fairly simple way to increase the scope of that command to include other folders where we have VMs?
eg: "/vmfs/volumes/ESXi-VMs" as well as "/vmfs/volumes/A2VD1_VMs"
Thanks
So the command that I'm showing you from above, lists only REGISTERED VMs on the current ESX(i) host. If it's not being displayed, then it means either A) VM is not registered B) it's running on another host.
I'm basically providing you the method in the which the script figures out whether or not the VM you're looking to backup exists to pull out it's VMID.
In your case, it sounds like it's not running on that host or you're getting the displayName wrong.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
@ianwitherow :
You also will encounter this problem if the file containing the machines to backup uses the wrong EOL characters.
This is somewhat difficult to diagnose as the name of the VM displayed looks corret.
Please ensure that the mentioned file is created under Linux and not under Windows or check with a hex editor that you don't see a CR+LF at the end of each line.
HTH
goppi.
I had a look at FAQ #18, but i don't have Input/Output error in my log...
By the way i tried to change from NFS protocol to Iscsi and i have the same issue.
Any idea for a solution ?
Regards.
Denis.
Well the input/output is one of many errors you may or may not see, basically from what you're describing, you're seeing similar problems when trying to delete larger files which also has a side affect of snapshots potentially being left behind. FAQ #29 also is related to this problem and it's not the NFS protocol specifically but it's still something we're not 100% sure. Though if you're switching between NFS and iSCSI and you're still seeing the error, then it looks like FAQ #29 may apply to you. Try switching the underlying filesystem type which I'm assuming you're using ext3 to xfs and try it again.
You'll also notice you won't run into this problem if you backup to a local VMFS volume on the host, so this specific to the datastore and it's configurations.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello William
I thank you for the excellent script that makes life easier for us system administrators like me!
if the information can be useful to other friends, I have scheduled the script from a Windows machine, and in combination with WinSCP and Plink BLAT I got a solution that makes me sleep peacefully!
the real limit is that sometimes I find infrastructure machines with old snapshots.
you think you can, provide these features in the script:
- Shut down/Suspend(best) only one specific VM has a snapshot without make a new snapshot..
- Perform a complete copy of the total of all files related to the VM in the path of the backup
- Restart the same VM as if nothing had happened!
sorry if any argument was already addressed, but I tried to read the whole discussion and I found nothing.
thanks again for your work!
hello
Miriano.
It would be nice to see a mechanism to run a command on the guest before and after the snapshot was taken.
My VM happens to be an email server, and while I probably can just have the whole thing shutdown, it might be "cleaner" just to have the guest prepare for the snapshot by shutting down any running services.
Could that be easily added?
No, this is not something that can be added. The ability to perform operations would differ from OS to OS and there's nothing you can leverage through a "free" solution to perform any type of operations within the guestOS. If you have VMware Tools installed, and you enable quiesce of the filesystem, it'll flush the IO to disk before the snapshot is taken, certain OSes such as Windows may have some built in frameworks as VSS to make the application aware that it's about to backed up. In either case, the snapshot should not affect the application running and it'll continue to perform r/w operations but all new writes will just go to a new delta disk.
You of course could add your own "scripts" to say shutdown a service/etc. for instance SSH into a UNIX/Linux system but again this will be environment specific and is outside of the scope of the script.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
I am not so concerned about eh VM continuing to run, but rather the usefulness of the snapshot that is taken.
I think having a CMD that is run locally on the host before and after the snapshot would give me the ability to write a guest specific script that could essentially perform an SHH to the guest to run a script there that would do my shutdown and restart.
I can add something to the existing script, but it seems like it might be a generally useful hook to add for other reasons...
N'est ce pas?
I am not so concerned about eh VM continuing to run, but rather the usefulness of the snapshot that is taken.
Not sure I follow your comment, the "usefulness" of the snapshot is that it's required for powered on VMs to unlock the VMDK for read access, else it'll be locked. So that's a requirement, even for other backup solutions such as VMware vDR and Veeam Backup & Replication.
If you have a need to run guest specific commands/scripts before and after the backup, this is something that you'll need to create for your environment. Depending on restrictions/requirements of a given environment, the implementation of this can be done in various ways (e.g. using SSH keys,etc).
Again, this is outside of the scope of this backup script, the point of the script is to provide a general backup script that can be implemented in any environment. If you need more specific operations that applies to your operating environment, then you'll need to implement those features yourself.
Thanks
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Like I said, my machine happens to be an email server. So, just grabbing a snapshot while it is processing email might not be great. For example (purely hypothetical), imagine it is in the middle of handling and incoming email so, pipes are open reading streams, and the DB has a transaction open, etc... Restoring to that exact point might not be useful since the incoming port will no longer have the data from the email server that sent the email in the first place (it would have been consumed by the continuation of the running VM).
So, ideally I would shut down the email services gracefully prior to performing the backup to make sure the machine is nice and "quiet" for the snapshot to more likely be useful.
At any rate, I am not looking for the scripts to actually do any of this, I can write that. I am just suggesting that having a hook in your script that allowed someone like me to specify in the VM's backup config file, a script that should be run prior to taking the snap shot, and another one after the snapshot was taken would be ideal. Something like:
PRE_SNAPSHOT_CMD='shutdown.sh'
POST_SNAPSHOT_CMD='restart.sh'
And ghetto would simple (if the strings were not blank) execute those scripts on the host (checking the return values of course).
Then I could write the shutdown.sh and restart.sh script to do what I need for that host running against my specific guest OS.
See what I am getting at?
I see where you're coming from but again I'm going to re-iterate my points. This is "specific" to YOUR environment, not everyone. I'm not going to make general assumption on how the script should be executed. What if I have some users that can utilize something like SSH keys to do the SSH to the host to execute the script and others that can't? What then? What if I have some users that are running Window OSes and not Linux OSes? You won't be executing the script in the same manner using a shell script/etc. What about isolated network management and VM networks? What if a user wants to run script A,B,C on VM1,3,4 but not 2 and 5? The logic to implement something like this definitely not trivial and can be very complicate or very simple depending on the environment and the use cases.
Regarding feature requests, I would like to point you to FAQ #15
The best advice/suggestion that I can offer is you implement something that fits your needs, I will not be creating any type of generic solution for this as there are too many variables / assumptions to consider.
Thanks for the feedback.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
That's the whole point of just providing the hook; it is up to the user to write the actual script that is appropriate for their environment. The only assumption that ghetto would make is that if it is set, and points to a valid file, it would perform a system call to it and get the return value; erroring out on a non-zero return value. And that would be the extent of the contract ghetto would have; everything else would be up to the user.
Also, because it would be in the VM config file, they could specify different scripts for different VMs if they wanted to.
If the user needed to run script A,B,C for VM1 they would write a script that ran A,B,C and specified that script in the parameter in the config file for VM1.
I understand your skepticism that this would indeed be useful to others, and thus not really interested in implementing it. I would be more than happy to implement it and give it back to your for your consideration.
Like I said, there's definitely a way to implement something like this but it will not be a trivial task. This would potentially add an additional level of complexity on top of the script and additional testing. My main concern is what if these "user" scripts never return? Debugging whether it's the script or user scripts? Creating a simple Linux scriptp and using something like SSH keys wouldn't be too bad, but what about the use case for Window base systems? Creating the "user" script will differ between ESX and ESXi, since Busybox console will be much more limited. Simple SCP would work for UNIX/Linux systems but to get a script onto Windows box may not be as trivial and may require other binaries/components.
If you come up with a method by all means, though this is something I'm not going to be adding into the script nor supporting.
Good Luck
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hi ALL,
I have a small issue where I have in the global file VM name “WinXP Admin” with a space in between doesn’t get reflected to /tmp/list file during comparison. However in the /tmp/currentvms file, it does pickup that VM name. Can someone see what I am doing wrong here.
start
rm -rf /tmp/list
vmware-vim-cmd vmsvc/getallvms | sed 's/[:blank:]\{3,\}/ /g' | awk -F' ' '{print $2}' | sed 's/] /]\";\"/g' | sed '1,1d' > /tmp/currentvms
for i in `cat /tmp/currentvms` ;do
awk -v var=$i -F, '$1==var' /vmfs/volumes/BACKUP/scripts/globaltobecloned >> /tmp/list
done
/vmfs/volumes/BACKUP/scripts/ghettoVCB.sh -f /tmp/list
Thanks in advance.
Vishal
If you found this information useful, please consider awarding points for Correct or Helpful.
I see as a listed feature: "Ability to include/exclude specific VMDK(s) per VM".
However, after looking through the documentation, I see no specific language on how to "exclude" a VMDK, only how to specifically include a list of VMDKs, or "all". This implies that the method for exclusion is to simply exclude a VMDK from the include list (include all but the one you don't want.)
I would like to completely exclude a specific VM, and all of its VMDKs from being backed up. How do i accomplish this? Do I simply set VMDK_FILES_TO_BACKUP="" for that VM? Is there another way to tell ghettoVCB to skip the VM in its entirety?
Thanks,
--John
This is an easy one
By default, not all VMs get backed up. As you can see from the documentation, you need to specify a vmlist which tells the script which VMs to back up, so if you want to skip a specific VM all together, just don't include it. If you need a more granular backup config such as specifying specific VMDK, then you need to create a backup configuration file for each VM in which you can specify exactly which VMDK(s) you want backed up. Again, all this relies on the vmlist and the VMs within the file. Hopefully this makes sense, if not, I would recommend you go through the documentation again.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello everyone,
I've been spending some time looking at the suggestions/features provided by the community and have the following listed:
1) Ability to backup all VMs w/o having to specify a list
2) Ability to power off VM, offline snapshot and power the VM back on and proceed with the backup.
3) Global ghettoVCB configuration file
4) Implementation of some locking mechanism to ensure only 1 ghettoVCB instance can run at any given moment
5) Support VMs with existing snapshots
6) Ability to control whether VM backup directories are rotated in general or kept in-definite and leave it to end users to rotate out
7) Additional logging + overall final status of backup job
As of writing this, I've completed the implementation of #1, #3, #4, #6 and #7. I've still got a bit more of testing to do but will be releasing an early preview of the script for the general public.
I will not be implementing #5 as snapshots should not be used for long durations but also for technical reasons as the implementation of removing snapshots by vimsh is not the most robust and could lead into issues especially with complicated snapshot trees. With regards to feature suggestion #2, I still need to explore what changes that may mean for the script as it may not be a straight forward change.
Again, thanks to the community for all the great feedback and to the users who have written some enhancement to the scripts, I've taken some of features and integrated into the new script.
Keep an eye out for the new version of ghettoVCB very soon!
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello,
I have got some issue with the script.
here is my log file : http://pastebin.com/NN5BasUw
ESXI 4.0
SMP Release build-219382
vm1 : vmdk 20 Go
vm2 : vmdk 20 Go
Backup datastore type : local
In my backup folder I have got the following folders :
vm1
vm2
Inside the folder vm2 :
vm2-2010-04-19 vm2-2010-04-192 vm2-2010-04-193
Inside the folder vm1 :
vm1-2010-04-19--3
I try this script on two different server (running the same esxi version). I was running the backup with the crontab.
When I'm running the backup manually, everything seems allright.
Thanks in advance for any help.
In my vm2 folder I still have the snapshot (delta files are still there).
Any idea ?
Sorry I forgot to give the capacity of the datastore 2 :
1.8T 642.6G 1.2T 35%
Quickly looking at your logs, it seems that you have multiple backups running at the same time, especially vm1. I would double check your crontab entry to ensure you don't have multiple ghettoVCB instances running which may be over-stepping each other and that maybe why you're still seeing delta files.
If you can manually run it without any problems, then it should be the same if you have it scheduled via cron. In the next release, a check has been implemented to ensure that only 1 instance of ghettoVCB is running at anytime on a given host.
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello,
thank you for you answer. I told you a bit quickly I didn't had any trouble by manual execution, but I finished my test and I have exactly the same issue.
I try to run the script on my other ESXI server which is exactly the same configuration and I have trouble too.
I used the following crontab :
01 * * * * /vmfs/volumes/datastore2/ghettoVCB/ghettoVCB.sh -d debug -f /vmfs/volumes/datastore2/ghettoVCB/vm_list -l /vmfs/volumes/datastore2/ghettoVCB/backup.log
Regards
Just released the latest version with the script with the changes I had mentioned earlier, please give the script a try and let me know what you think or if you find any issues/bugs.
Thanks and enjoy!
=========================================================================
William Lam
VMware vExpert 2009
VMware ESX/ESXi scripts and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/Sample code for Developers and Administrators
If you find this information useful, please award points for "correct" or "helpful".
Hello William,
I try your last version of the script. Now its working but I have some issue.
I let run the script for a while see the pastebin : http://pastebin.com/EdE2U5yz
- I see lot of error # Failed to acquire lock, another instance of script may be running, giving up on /tmp/ghettoVCB.lock
But I'm running with the following crontab :
01 * * * * /vmfs/volumes/datastore2/ghettoVCB/ghettoVCB.sh -d debug -f /vmfs/volumes/datastore2/ghettoVCB/vm_list -l /vmfs/volumes/datastore2/ghettoVCB/backup.log
I don't see why two instance of the script are running in the same time ?
- The rotate of the backup didn't work as expected I had the following backup for vm2 in my folder :
vm2-2010-04-22_ 0-01-01
vm2-2010-04-22_ 1-01-01
vm2-2010-04-22_ 2-01-01
vm2-2010-04-22_ 3-01-01
vm2-2010-04-22_ 4-01-01
vm2-2010-04-22_ 5-01-01
vm2-2010-04-22_ 6-01-01
vm2-2010-04-22_ 7-01-01
vm2-2010-04-22_ 8-01-01
vm2-2010-04-22_ 9-01-01
vm2-2010-04-22_12-01-01
vm2-2010-04-22_13-01-01
vm2-2010-04-22_14-01-01
I don't understand why I have got so much backup for one vm as I specified VM_BACKUP_ROTATION_COUNT = 3.
Is there a relation with my previous issue ?
Thanks in adavance
The -a (all VMs) option in the new script is great, but it would be helpful to allow a list of VMs to exclude when using -a.