Hello,
Im running free esxi 5.1.0 and a windows 2008 r2 x64 vm which im trying to transfer to another host with the exact same hardware/esxi setup. Ive used several methods of trying to transfer the vm but all have failed. I suspect it has something to do with the vm config file corruption from what im reading. I have used vm converter and it fails at 1% with no specific error, ovatools fails with
Thanks
i think i figured it out. For some reason i had my vm set up as 2 sockets which the host doesnt even have but the vm still ran fine. I shut it down and change it to single socket single core but i have not tested the transfer yet. Can someone confirm if they have seen this before?
Thanks
negative. Still fails at moving the vm
Hello,
hm strange. i know that only for OVF Appliances. Could be Kind of Corruption.
So i would now avoid shutting down the VM. i would try out to use the Converter to make a V2V of it to create a new xxx_new. (to have that VM Covered)
maybe you could arrange that in a Time where not much activity is happening ;(.
Best would be to open a Vmware Prio 1 Call to get direct help. Because it's an Incident ;(
Best regards
Max
i have tried converter and it fails at 1% with this error
using ovftool command i get this
I also tried browsing the datastore and doing a normal copy and that fails.
Im running out of ideas. I even reboot the host and still no good. The VM is running perfectly fine it's just that i want to move it to a raid 1 group. I really need assistance if possible.
Thanks
Hi theire,
ah so it's an OVF?
So then i found this virtuallyGhetto: How to Deploy an OVF Located On ESXi Datastore Using ovftool
theire is an entry from "Jerome OrtegaJuly 28, 2013 at 7:19 PM"
he noted having same Problem > and he used "--skipManifestCheck switch" to have a Workaround.
maybe it helps in future > once downloading OVF or any other Binaries > checking the Hash md5/sh1 against the Vendors ones
Best regards
Max
it's not a OVF file and is currently a VM. I used ovftool.exe successfully before to move the vm from one host to another successfully. How can i check exactly what wrong with the VM config? I like to fix it beforehand instead of using skipManifestCheck switch.
Thanks
when i browse the datastore and try to copy i get this error. Again, this VM is running perfectly fine and i shut down everything before i do the move.
Thanks
Hm very strange. never saw such conditions. Do you have San connection in background? Maybe theire is a Kind of Block Level Corruption,.... ?.
Anyway for this Case i think it would be important to contact Vmware for a Direct Support.
i don't sense it as a "normal" Problem.
Best regards
Max
The email vm is on a sata drive. I would contact VMWare but they are charging me 300 bucks which is something i dont have. ill see what i can do. Thanks
Turns out the disk has a lot of bad sectors so it's only a matter of time before this vm dies. I ran a disk util program. I found it weird because esxi 5 event viewer doesnt show anything regarding HD errors
Surely that will depend on whether these errors are reporting via SMART, if not then I wouldn't expect the events to show up.
One word of advice would be to get this backed up anyway you can because if\when it fails you will be in a world of hurt.
backing up is what im trying to do but it's impossible to copy the vm using any method from above
Ok you may have to see about taking a backup of the data inside the VM and build up a new VM on the other host and restoring the data that way.
The problem you may face is that the more attempts you make to take data off the disk 'may' cause the disk to fail sooner rather than later.
This is why having a decent backup solution in place can be the difference between a successful company or one that fails because they lose their data and have to stop trading.
I don't know how many critical vm's you have running on that disk but you may want to shut down the non critical ones and see about getting that in VM backup kicked off ASAP.
yes im aware of possible failure trying to do activity on the disk. It's only 1 exchange cas server and dag member. I can survive but would rather copy the vm. Im going to deploy a cas array to further protect myself.
Thanks