vCenter

 View Only

  • 1.  Physical adapter networks

    Posted Aug 08, 2022 05:20 PM

    I have two 10GB network adapters setup on on vswitch.  These are connected to trunk ports on the physical switch.  I am trying to bring a new VLAN into the environment but the way I am looking at things the new VLAN is not available.   

    Here is the information from the adapter.

    Status
    StatusConnected
    Actual speed, Duplex10 Gbit/s, Full Duplex
    Configured speed, Duplex10 Gbit/s, Full Duplex
    Networks10.30.1.1-10.30.1.127 ( VLAN100 ) 10.30.5.128-10.30.5.191 ( VLAN5 ) 0.0.0.1-255.255.255.254 ( VLAN2500 ) 0.0.0.1-255.255.255.254 ( VLAN700 )

     

    I am trying to bring in VLAN 702 which is on the list of vlans in the switch configuration.  

    My question is how are these networks (VLANS) assigned to this physical adapter , how do I edit this information?

     

    Thanks

     



  • 2.  RE: Physical adapter networks

    Posted Aug 09, 2022 08:17 AM

    at first you must pass VLAN on physical switch.

    and then add port group on Vswitch and tag a VLAN for that.