Guest OS is CentOS 6.9
I have set up SSH and can connect
Everything looks normal
But when I press Finish to start the conversion
Status is displayed as 1%
After a few hours, the progress is still shown as 1%
This machine has only 80G hard drive
It's a bit incomprehensible why the conversion process is almost stopped
Don't know whether you can query the Guest whether there is an action in the transfer?
Guest OS 是 CentOS 6.9
我已經設定好 SSH 而也可以連上
一切設定看起來都是正常的
但是當我按下 Finish 開始轉換的時候
Status 顯示為 1%
過了幾個小時,進度仍然顯示為 1%
這個機器的硬碟只有 80G
有點無法理解為什麼轉換的進度幾乎停止
不知道是否可以查詢 Guest 端是否有在傳輸的動作?
Most often the break at 1% is because helper could not be connected. Verify helper's IP setting and ensure connection between helper, server and source machine. The query process could be verified with invoking "View source details" in first page.
HTH
StarWind V2V Converter should help you if you are doing V2V. If I am mistaken and you are going physical to virtual, check the following VMware KB: