I have installed Photon on an SSD but I like to save the data on a RAID volume.
RAID is configured in BIOS using the RSTe profile. It says in the BIOS it will use "intel iastor drivers"
But once it is booted, the three drives are listed separately. Is there something I should do ?
Learned that Intel RST is in fact a pass-though for OS software RAID and ESxI does not support thaté
In BIOS, switched controller for the eRST2 (LSI RAID controller).
Was able to create a volume using this tutorial : RAID1 with LVM from scratch
Learned that Intel RST is in fact a pass-though for OS software RAID and ESxI does not support thaté
In BIOS, switched controller for the eRST2 (LSI RAID controller).
Was able to create a volume using this tutorial : RAID1 with LVM from scratch