Hejmo
Contributor
Contributor

[Solved] How to Mount an Intel controler RAID volume

Jump to solution

I have installed Photon on an SSD but I like to save the data on a RAID volume.

RAID is configured in BIOS using the RSTe profile. It says in the BIOS it will use "intel iastor drivers"

But once it is booted, the three drives are listed separately.  Is there something I should do ?

0 Kudos
1 Solution

Accepted Solutions
Hejmo
Contributor
Contributor

Learned that Intel RST is in fact a pass-though for OS software RAID and ESxI does not support thaté

In BIOS, switched controller for the eRST2 (LSI RAID controller).

Was able to create a volume using this tutorial : RAID1 with LVM from scratch 

View solution in original post

0 Kudos
1 Reply
Hejmo
Contributor
Contributor

Learned that Intel RST is in fact a pass-though for OS software RAID and ESxI does not support thaté

In BIOS, switched controller for the eRST2 (LSI RAID controller).

Was able to create a volume using this tutorial : RAID1 with LVM from scratch 

0 Kudos