Hi all
I got a HP N40L and would like to install a RR2720 amongst other things.
So far I ran ESXi 6 from a 1 TB HD, and 4 HDs, connected, worked all peachy.
I got my RocketRaid 2720 SGL today, together with 4 x 3TB WD Red and 1 250 GB SSD.
I installed ESXi 6.0 on a USB stick, boots fine, I can connect to it, no fuss.
I also installed an SSD on one of the SATA port connected to the mainboard - ESXI recognised it right away and let me create a datastore.
Now I installed the RR2720, connected the disks to the cables, when it boots, the RR recognises all the connected hard disks, the 4 x 3TB WD REDs are bound to a RAID5, the SSD is now on a single cable on Port 2 on the raid card.
But in ESXi, I cannot access the raid nor the single SSD.
When I go to Configuration - Storage - Add storage, the "select disk/LUN" is empty.
What am I missing?