Hello! It's been a while since I last posted here with my own topic. I now have a dedicated ESXi server in the works, and am planning to start using it 24/7 by the end of this year or early next year (2021). Here are the specs for the hardware:
CSE :: HPE ProLiant DL580 G7
CPU :: 4x Intel Xeon E7-8870's (10c/20t each; 40c/80t total)
RAM :: 128GB (32x4GB) DDR3-1333 PC3-10600R ECC
STR :: 1x HP 518216-002 146GB HDD (ESXi, VMware Linux Appliance, System ISOs) +
1x 500GB Seagate Video ST500VT003 HDD (Remote Development VM) +
4x HP 507127-B21 300GB HDDs +
1x Western Digital WD Blue 3D NAND 500GB SSD (Virtual Flash) +
1x Intel 320 Series SSDSA2CW600G3 600GB SSD (VFF)
1x LSI SAS 9201-16e HBA SAS card (4-HDD DAS) +
1x Mini-SAS SFF-8088 cable +
1x Dell EMC KTN-STL3 (15x 3.5in HDD enclosure) +
4x HITACHI Ultrastar HUH728080AL4205 8TB HDDs +
4x IBM Storewise XIV v7000 98Y3241 4TB HDDs
1x nVIDIA GeForce GTX Titan Z
SFX :: 1x Creative Sound Blaster Audigy Rx
NIC :: 1x HPE NC524SFP (489892-B21)
I/O :: 1x HPE PCIe ioDuo MLC I/O Accelerator (641255-001)
ODD :: 1x Sony Optiarc BluRay drive
Parts marked with * are already in-house, but require further planning/modification before they can be added to the server. As of now, the fans aren't required
for functionality. They were meant to help quiet the server down a bit, but they require some modification to work. This part can wait at all.
Here is the current software configuration plan for the server:
* Temporary task that will be replaced by a permanent, self-hosted solution
** Can benefit from port forwarding, but will be primarily tunnel-bound
^ Tunnel-bound (VPN/SSH) role - not port forwarded/exposed to the Internet
+ Active Directory enabled - Single Sign On (SSO)
Here is the current resource allocation plan for the server:
VMs marked with an * cannot be run at the same time. Only one of them can ever run at any given moment. MacOS and Linux would have gotten a Radeon/FirePro (ie., Rx Vega 64), for best compatibility and stability, but market forces have prevented this. Windows 10 gets the Creative Audigy Rx. The MacOS and Linux VMs get whatever audio the GRID K520's provide (either that or a software solution). Windows 10, Remote Development, and the Temp/Testing VM will be put to sleep (or offed) until they are needed (Wake on LAN), since they don't host any essential services.
There are three other mirrors for this project, in case you're interested in following individual conversations from the other sites (in addition to this thread).
P.S. Out of all the sites that I've ever used, this forum has one of the best WYSIWYG editors I've used in a while Kudos to the devs!
Message was edited by: TopHatProductions115
This mirror is no longer frozen. Please refer to first reply from 01/03/2021 for more information,,,
Just a quick note that flash read cache is now deprecated - vFlash Read Cache Deprecation Announced - VMware vSphere Blog
Edited to add that you would be violating the macOS EULA and I suspect VMware's EULA by running macOS on non Apple hardware.
It also looks like the latest version of ESXi that a DL580 G7 supports is 6.0 U3.
Moderator: Running MacOS on anything other than Apple hardware would be a violation of the Apple EULA and cannot be discussed here.
This post can remain in relation to all the other things you are doing, but please keep MacOS out of any discussion.
The version(s) of ESXi that apply to my use case were released before the deprecation, weren't they? Did VMware go back and retroactively remove the feature from older ESXi images? Or is it just no longer officially supported? Just trying to make sure I know what I'll be facing.
Deprecated means the feature will be removed in a future release however that feature will remain in earlier versions.
Out of interest, why are you choosing a DL580 ? Are you able to get one super cheap? I would have thought it would cost an absolute fortune to run.
Currently waiting on some HP-branded SAS drives for the server, since those have the potential to affect the acoustics in a positive manner (reduced sound output). Can't wait to test them out when they arrive. Then I'll be able to test a VMware ISO on the server. I'll be sure to document how that goes.
Made some changes to the SAS HDD choices I'm using, due to compatibility and acousitcs reasons. While I could go and LLF the whacky NetApp drives I purchased, I'd still have to put up with a noisier server afterward. I'd rather move in a different direction, and restrict that issue to my decisions in PCIe cards instead. Also removed the old HITACHI HDD, since it didn't really belong in this project. It's SATA 1 or 2 iirc. Here are the items I kicked from the project:
Still looking to see if I can get the Dell mouse...
Currently looking into making a custom ESXi 6.5 image for the DL580 G7, since official support was axed after 6.0. I already own the license, and I'd rather not waste it in laziness. It wouldn't be the first time I had to do something like this. On a side note:
Just removed a Tesla K10 from the project. It's been reduced to a spare component, for the sake of noise reduction and power concerns. Artix Linux is no longer in line to receive a GPU. MacOS will take over the F@H role. If you have any questions, feel free to ask.
I've ordered the cable. Now I'm just waiting on the postal service to get it to me, so I can (possibly) begin the project this Wednesday. The last week I'll spend in pre-installation delay. I should be able to test out ESXi 6.5 installation today, as long as no one/thing interferes this afternoon...
Currently looking into VMware Horizon 7, for app virtualisation. Time to see if I can beat Turbo/Spoon at their own game.
If I can move UnGoogledChromium and KeePass 2 to a remote instance, I'd call that the first step to success...
Onto the next issue:
Also have to look into this at some point (even though the server will be mostly hiding behind a VPN):