Hello!
I have a problem with Intel E10G41BFSR in passthrough mode. During VM start i recive "Failed to start the virtual machine." error
Additional Task Details: | |
Host Build: 1331820 Error Type: GenericVmConfigFault Task Id: Task Cancelable: True Cancelled: False Description Id: VirtualMachine.powerOn Event Chain Id: 191501022 Progress: 100 |
in vmware.log :
2013-11-22T14:09:23.585Z| vmx| I120: PCIPassthru: 06:00.0 : Device BAR 0 requested 64-bit memory address that exceeded MPN type (61574796541952).
2013-11-22T14:09:23.585Z| vmx| I120: PCIPassthru: 06:00.0 : Device BAR 4 requested 64-bit memory address that exceeded MPN type (61574797066240).
2013-11-22T14:09:23.585Z| vmx| I120: Module DevicePowerOn power on failed.
The same situation in ESX 5.5, 5,1
Server is Intel R1208GZ4GC
How can i fix this?
Thanks!
Hi ElmorStorm, and welcome to the VMware Communities!
Here's something to try, if it is suitable for your environment...
Go into your Server Board S2600GZ host's firmware setup, then choose Advanced > PCI Configuration. Change Memory Mapped I/O above 4GB to Disabled. Then try booting the VM with passthrough enabled.
Cheers,
--
Darius
Hi ElmorStorm, and welcome to the VMware Communities!
Here's something to try, if it is suitable for your environment...
Go into your Server Board S2600GZ host's firmware setup, then choose Advanced > PCI Configuration. Change Memory Mapped I/O above 4GB to Disabled. Then try booting the VM with passthrough enabled.
Cheers,
--
Darius
THANK YOU, Darius!
Absolute solution!