Hello,
I am about to configure a new ESX-Cluster with the below differences only on the CPUs.
Server-A has the X5550 CPUs
Server-B has the E5520 CPUs
See below exact details. CPUs are of the same family the only differences are the GHz and the QPI Speeds.
Processor Number | Intel® QPI Speed | L3 Cache | Processor Base Frequency | Max Turbo Frequency | Power | Number of Cores | Number of Threads |
X5550 | 6.4 GT/s | 8 MB | 2.66 GHz | 3.06 Ghz | 95 W | 4 | 8 |
E5520 | 5.86 GT/s | 8 MB | 2.26 GHz | 2.53 Ghz | 80 W | 4 | 8 |
My questions is if it's possible to configure FT on VMs using the above CPU differences?
If anyone knows is it supported by VMware.
Thanks in advance
Hello.
You will be supported with that config, as both procs are in the Intel Xeon based on Core i7 Microarchitecture Category. Check out kb 1008027 for the details. There is also some really good information in the "[The Design and Evaluation of a Practical System for Fault-Tolerant Virtual Machines|http://www.vmware.com/resources/techresources/10134]" technical paper that explains how the processor frequency differences are handled.
Good Luck!
Message was edited by: vmroyale -- corrected the category information.
Hello.
You will be supported with that config, as both procs are in the Intel Xeon based on Core i7 Microarchitecture Category. Check out kb 1008027 for the details. There is also some really good information in the "[The Design and Evaluation of a Practical System for Fault-Tolerant Virtual Machines|http://www.vmware.com/resources/techresources/10134]" technical paper that explains how the processor frequency differences are handled.
Good Luck!
Message was edited by: vmroyale -- corrected the category information.
Thanks for the good information vmroyale