micy01 Tracker

Re: Horizon and Zero client firmware

micy01 — Thu, 08 Apr 2021 07:14:35 GMT

Hi,

I know about the existence of UAG, but I don't know the details. I plan to install Horizon version 2012 or 2103 with UAG and gradually move to the new Horizon. Perhaps the old and new versions will be able to run side by side.

Milan

Re: Horizon and Zero client firmware

micy01 — Wed, 07 Apr 2021 06:48:18 GMT

Hi Fabio.

Thank you for answer.

I read the release note, but I also wanted to know if anyone has experience with the old version of the client against the latest versions of Horizon.

I know about connection server replication, but it is not possible to do this with a secure server. And I would like to install the highest version of Horizon.

Milan

Horizon and Zero client firmware

micy01 — Tue, 06 Apr 2021 13:35:01 GMT

Hi everybody.

I want to upgrade the virtualization and VDI environment.

Our current version:

VMware vSphere 6.7

VMware Horizon 7.3.2

Zero Client 6.5.2

Future version:

VMware vSphere 7.0 U2

VMware Horizon 7.12 or 7.13 or 2006 or 2012

Zero Client 6.5.2 - we have no subscription

HP ThinPro - Linux with VMware Horizon client 4.10.0

My questions.

1. Is it possible to use Zero Client 6.5.2 with some of the listed future versions of Horizon?

I did not find the old version of Zero Client in the matrix

https://www.vmware.com/resources/compatibility/search.php?deviceCategory=vdm&details=1&partner=793&releases_filter=244&productType=Hardware&page=1&display_interval=10&sortColumn=Partner&sortOrder=Asc

2. Since we do not have a subscription, I have to use Zero Client 6.5.2.

What is the highest version of Horizon I can use for this client?

3. I want to perform a clean installation of Horizon on the new WS2019. Is it possible to drag

all settings from the old running version of Horizon 7.3.2?

Thanks a lot.

Milan

Re: Upgraded to 5.5 and no client downloads are listed on the splash page.

micy01 — Tue, 18 Feb 2014 14:24:15 GMT

Hi,

I have deployed the vCO appliance and now I can download client.

I can provide them for applicant. :smileylaugh:

Milan

Re: Upgraded to 5.5 and no client downloads are listed on the splash page.

micy01 — Tue, 11 Feb 2014 14:10:10 GMT

Hi,

thanks for the advice. That is horrible and stupid!

Thanks a lot again. I will try it.

Milan

Re: Upgraded to 5.5 and no client downloads are listed on the splash page.

micy01 — Mon, 10 Feb 2014 11:48:27 GMT

I can not find vCenterOrchestratorClient 32-bit installable. Nowhere.

Can anybody help me? Please!

Thanks

Milan

Re: Upgraded to 5.5 and no client downloads are listed on the splash page.

micy01 — Mon, 10 Feb 2014 08:58:53 GMT

Thaks for your answer. I have sensed this problem, but I can't find the 32-bit installer on the vmware pages.

I have to try again. If you know it send me please the link.

Thanks

Milan

Re: Upgraded to 5.5 and no client downloads are listed on the splash page.

micy01 — Fri, 07 Feb 2014 09:45:10 GMT

Hi,

I have the same problem. When I want to install the client (vCenterOrchestrator.exe from vSphere CD) on W7 Pro 32-bit there is an error "When loading Java VM the error Windows 216 occured".

And on the web Orchestrator page there isn't the link for downloading.

Can anybody help?

Milan

Re: Problem - Adding PowerShell host in PowerShell plug-in

micy01 — Fri, 01 Nov 2013 15:16:39 GMT

I saw the erro in the log. But I don't understand why vCO needs the vix library. I have unchecked VIX plugin in the coniguration server and added PowerShell host!

Great!

Thank you very much.

Re: Problem - Adding PowerShell host in PowerShell plug-in

micy01 — Fri, 01 Nov 2013 14:48:23 GMT

Hi,

here is wanted.

Re: Problem - Adding PowerShell host in PowerShell plug-in

micy01 — Fri, 01 Nov 2013 13:03:09 GMT

Thanks for your answer.

But in th 1st link is nothing new for me and I don't want to use Kerberos (the 2nd link) if it is not required.

Problem - Adding PowerShell host in PowerShell plug-in

micy01 — Fri, 01 Nov 2013 11:46:10 GMT

Hi everybody.

I want to execute PS scripts localy on a host from vCO.

I have installed this components on it:

1. WS 2008 R2

2. vCO V5.1.0 Build 2725

3. PowerShell plug-in V1.0.1

4. WinRM V2.0

5. PowerShell V2.0

I have configured WinRM by this commands as Administrator:

winrm quickconfig

winrm set winrm/config/service/auth @{Basic="true"}

winrm set winrm/config/service @{AllowUnencrypted="true"}

winrm set winrm/config/service/auth @{Basic="true"}

winrm set winrm/config/client @{AllowUnencrypted="true"}

winrm set winrm/config/client @{TrustedHosts ="vco_host"}

winrm get winrm/config

Config

MaxEnvelopeSizekb = 150

MaxTimeoutms = 60000

MaxBatchItems = 32000

MaxProviderRequests = 4294967295

Client

NetworkDelayms = 5000

URLPrefix = wsman

AllowUnencrypted = true

Auth

Basic = true

Digest = true

Kerberos = true

Negotiate = true

Certificate = true

CredSSP = false

DefaultPorts

HTTP = 5985

HTTPS = 5986

TrustedHosts = 127.0.0.1, vco_host

Service

RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)

MaxConcurrentOperations = 4294967295

MaxConcurrentOperationsPerUser = 15

EnumerationTimeoutms = 60000

MaxConnections = 25

MaxPacketRetrievalTimeSeconds = 120

AllowUnencrypted = true

Auth

Basic = true

Kerberos = true

Negotiate = true

Certificate = false

CredSSP = false

CbtHardeningLevel = Relaxed

DefaultPorts

HTTP = 5985

HTTPS = 5986

IPv4Filter = *

IPv6Filter = *

EnableCompatibilityHttpListener = false

EnableCompatibilityHttpsListener = false

CertificateThumbprint

Winrs

AllowRemoteShellAccess = true

IdleTimeout = 180000

MaxConcurrentUsers = 5

MaxShellRunTime = 2147483647

MaxProcessesPerShell = 15

MaxMemoryPerShellMB = 150

MaxShellsPerUser = 5

But when I want to add PowerShell host in PowerShell plug-in I am not successful. Nothing in the log.

I have used HTTP, 5985, basic, shared session and user session.

Can anybody help me please?

Thanks.

micy01

Re: SUSE with LVM doesn't boot

micy01 — Wed, 31 Jul 2013 11:05:04 GMT

I would interest in the problem. But I leave the server without LVM because of his short live. It will be replaced by a new one in some month.

Thanks for your time and when you have the solution of the problem above let me know.

Milan

Re: SUSE with LVM doesn't boot

micy01 — Wed, 31 Jul 2013 10:58:20 GMT

Yes, /dev/sda1.

Re: SUSE with LVM doesn't boot

micy01 — Wed, 31 Jul 2013 08:47:13 GMT

Hi,

I have tried the conversion again but with the option "To basic" (without LVM) in the converter.

Then I have to make fsck of every FS and the VM boots normally.

Then I wanted to move FS on LVM. I execited this steps (briefly):

1. Make VG of the name vg00, LV and ext3 for FS.

2. Mount the root FS under /rootlv directory, copy root FS to this directory, mount next new FS under the appropriate directories in /rootlv and copy this ones too.

3. Boot to rescue, mount the new root FS under /mnt and next FS under /mnt, make chroot.

4. Fix /etc/fstab, fix /boot/grub/menu.lst, execute "grub-install /dev/sda", execute mkinitrd ( with the option "lvm2" too).

5. Reboot.

But the resolution is the same as in my the first post - the volume group vg00 is not found.

Where is the problem? I think mkinitrd creates initrd wich doesn't know LVM (bad kernel, libraries, modules, ...).

Do you have any idea?

Thanks a lot.

Milan

Re: SUSE with LVM doesn't boot

micy01 — Mon, 29 Jul 2013 09:13:55 GMT

Hi,

I have tried to convert the openSUSE by converter 5.0.1 but a result was the same. A reconfiguration the VM was OK, then I got to rescue, made mkinitrd, grub-install, tried to repare /etc/fstab, but VG system wasn't found.

I don't know what to do. The kernel isn't supported for the converter perhaps.

I will have to install a new VM with the same version of openSUSE and packages and move an application from the physical machine to the VM.

micy

Re: SUSE with LVM doesn't boot

micy01 — Thu, 25 Jul 2013 13:31:51 GMT

And another:

Re: SUSE with LVM doesn't boot

micy01 — Thu, 25 Jul 2013 13:30:27 GMT

I know that I can't convert md. I added the red message from the status tab to log highlights of the converter. :smileylaugh:

I prepared the logs before. They are here:

Re: SUSE with LVM doesn't boot

micy01 — Thu, 25 Jul 2013 12:10:46 GMT

Hi,

I tried to convert the physical machine again. I switched on the option "configure the VM" after converting. At the end there was the error:

20 Error: Unable to reconfigure the destination virtual machine.

FAILED: An error occurred during the conversion: ' * got kernel major revision as ERROR:
kernel version has to be in format 2.6.*, version 2.6.18.8-0.3-default is not supported (return code 1)'

19 Creating initial ramdisk (initrd).

18 Patching the mount point entries in fstab.

17 Installing the GRUB boot loader.

16 Starting the reconfiguration of the destination virtual machine.

Then I booted the VM. The situation was the same as on the 2nd screen of the my original post.

I booted the VM to rescue and made chroot. I listed /etc/fstab. It looks like this:

This is the original fstab from the physical machine:

/dev/system/system / reiserfs acl,user_xattr 1 1

/dev/sda1 /boot reiserfs acl,user_xattr 1 2

/dev/system/home /home reiserfs acl,user_xattr 1 2

/dev/system/opt /opt reiserfs acl,user_xattr 1 2

/dev/system/srv /srv reiserfs acl,user_xattr 1 2

/dev/system/tmp /tmp reiserfs acl,user_xattr 1 2

/dev/system/usr /usr reiserfs acl,user_xattr 1 2

/dev/system/var /var reiserfs acl,user_xattr 1 2

/dev/system/swap swap swap defaults 0 0

proc /proc proc defaults 0 0

sysfs /sys sysfs noauto 0 0

debugfs /sys/kernel/debug debugfs noauto 0 0

usbfs /proc/bus/usb usbfs noauto 0 0

devpts /dev/pts devpts mode=0620,gid=5 0 0

#/dev/system/documentrepository /srv/documentrepository reiserfs acl,user_xattr 1 2

/dev/md0 /srv/documentrepository ext3 defaults 1 2

What is wrong?

Thanks

Re: SUSE with LVM doesn't boot

micy01 — Tue, 23 Jul 2013 09:43:20 GMT

Hi,

thanks. I will try it again and post the log or more information.

micy01