https://communities.vmware.com/t5/Technical-Community-Resources/ESXi-8-0-amp-install-on-Dell-Precision-T5820-RAID-setup/m-p/2960572#M4283 <P>Hi</P><P>I got a Precision T5820 which has run Windows for some years. now I got a new PC and want to run ESXi 8.0 hypervisor on the system.</P><P>So far the latest edition of ESXi 8.0 runs and see the NVMe-drive as storage even if I had 2 pieces a made a RAID 1 it would be seen.</P><P>but the ESXi 8.0 does not see the RAID1 I created on SATA attached disks to mainboard.</P><P>is there a workaround to make ESXi 8.0 to "see" the RAID1 setup or does exist a low cost RAID Controller that work with 4 SATA disk connectors?</P><P>Probably the problem is Intel VROC RAID-setup.</P><P>JC</P><P>&nbsp;</P> Thu, 23 Mar 2023 07:45:56 GMT wnt2000 2023-03-23T07:45:56Z https://communities.vmware.com/t5/Technical-Community-Resources/ESXi-8-0-amp-install-on-Dell-Precision-T5820-RAID-setup/m-p/2960572#M4283 <P>Hi</P><P>I got a Precision T5820 which has run Windows for some years. now I got a new PC and want to run ESXi 8.0 hypervisor on the system.</P><P>So far the latest edition of ESXi 8.0 runs and see the NVMe-drive as storage even if I had 2 pieces a made a RAID 1 it would be seen.</P><P>but the ESXi 8.0 does not see the RAID1 I created on SATA attached disks to mainboard.</P><P>is there a workaround to make ESXi 8.0 to "see" the RAID1 setup or does exist a low cost RAID Controller that work with 4 SATA disk connectors?</P><P>Probably the problem is Intel VROC RAID-setup.</P><P>JC</P><P>&nbsp;</P> Thu, 23 Mar 2023 07:45:56 GMT https://communities.vmware.com/t5/Technical-Community-Resources/ESXi-8-0-amp-install-on-Dell-Precision-T5820-RAID-setup/m-p/2960572#M4283 wnt2000 2023-03-23T07:45:56Z