13 Replies Latest reply on Aug 27, 2009 5:13 PM by jbrown9999

    Lint1 Error on HP DL385

    jeff.mathews Novice

      Server: HP DL385

      VMware ESX: 3.0.1 , 32039

       

      What does the following error mean?  I get this on the screen of the ESX server.

      Thank you in advance..

       

      10:04:34:59:920 cpu0:1057) apic:1265 lint1 interrupt on pcpu0 (port x61 contains 0x11)

       

      More errors:

       

      10:03:02:43:354 cpu0:1024 (port x61 contains 0x11)

       

      10:04:32:58:354 cpu0:1057 (port x61 contains 0x31)

       

      10:04:35:00:986 cpu0:1058 (port x61 contains 0x21)

       

      10:04:34:59:920 cpu0:1057 (port x61 contains 0x11)

       

      10:04:27:42:710 cpu0:1057 (port x61 contains 0x11)

        • 1. Re: Lint1 Error on HP DL385
          grasshopper Virtuoso

          Typically NMI's (non maskable interrupts) come across port 0x61, indicating a memory issue or some other hardware fault.  First steps would be to upgrade bios, ensure proper bios settings (check VMware's KB for HP specific bios settings), reseat components, etc.

           

          Here are the error translations FWIW (not much to go on in this case):

           

          0x11:

          Refresh-Cycle State (Channel 1 Status)

           

          0x31:

          Speaker Tone (Channel 2) Status

          Refresh-Cycle State (Channel 1 Status)

           

          0x21:

          Speaker Tone (Channel 2) Status

          • 2. Re: Lint1 Error on HP DL385
            boydd Champion

            Is the memory properly balanced accrossed the processors?  G1/G2?  OEM Memory?

             

            DB

            • 3. Re: Lint1 Error on HP DL385
              KentTheDuke Lurker

              I have the same problem. Did you ever find a solution?

               

              APIC: 1265: Lint1 interrupt on pcpu 0 (port x61 contains 0x11)

              APIC: 1265: Lint1 interrupt on pcpu 0 (port x61 contains 0x11)

              APIC: 1265: Lint1 interrupt on pcpu 0 (port x61 contains 0x31)

              APIC: 1265: Lint1 interrupt on pcpu 0 (port x61 contains 0x31)

               

               

              Thanks in advance

              • 4. Re: Lint1 Error on HP DL385
                Donnyh5 Novice

                I have the same issue on IBM hardware.

                 

                APIC: 1265: Lint1 interrupt on pcpu 0 (port x61 contains 0x35)

                (1:01:19:33.930 cpu0:1024)

                 

                Did you ever find a solution?

                • 5. Re: Lint1 Error on HP DL385
                  grasshopper Virtuoso

                  APIC: 1265: Lint1 interrupt on pcpu 0 (port x61

                  contains 0x35)

                  (1:01:19:33.930 cpu0:1024)

                   

                  Did you ever find a solution?

                   

                  In your case Donnyh5, for IBM hardware, the 0x35 most likely maps to a "RAM Parity (or System Board) Intelligent Handler (bypass NMI)".

                   

                  You should consider moving the VMs to another host, reseating and/or replacing RAM, and running a memory check tool (there are freebies such as url=http://www.memtest86.commemtest86[/url]).  Of course you should also ensure that RAM is balanced across NUMA nodes (if any), and that they're all the same flavor, etc.

                  • 6. Re: Lint1 Error on HP DL385
                    cmorgan091 Novice

                    I have a similar problem, on a HP DL380 G4, only difference is its port x61 contains 0x91.

                     

                    This machine was upgraded with a second processor (exactly the same spec as the existing one) and I replaced 2x 512MB chips for 2x 2GB chips.

                     

                    The memory is now set to:

                     

                    DIMM 01 : 2048 MB 400 MHz

                    DIMM 02 : 2048 MB 400 MHz

                    DIMM 03 : 512 MB 400 MHz

                    DIMM 04 : 512 MB 400 MHz

                    DIMM 05 : 1024 MB 400 MHz

                    DIMM 06 : 1024 MB 400 MHz

                     

                    Processors are:

                     

                    Proc 1: 3200 MHz

                    Processor 1 Internal L1 Cache: 16 KB

                    Processor 1 Internal L2 Cache: 2048 KB

                    Processor 1 Internal L3 Cache: 0 KB

                     

                    Proc 2: 3200 MHz

                    Processor 2 Internal L1 Cache: 16 KB

                    Processor 2 Internal L2 Cache: 2048 KB

                    Processor 2 Internal L3 Cache: 0 KB

                     

                    Any help is much appreciated

                    • 7. Re: Lint1 Error on HP DL385
                      cmorgan091 Novice

                      Apparently, I have found out that HP only support certain memory configurations.  For the DL380 G4, you can only have 4 banks of dual chip memory, even though there are 6 banks.  It will boot fine, but its is not a supported configuration to have more than 4.  Take a look at the diagram on the underside of the lid, which shows supported memory configurations.

                       

                      Anyway, now that one is resolved, I am having more problems with SCSI, more weeks on the phone to HP i fear

                      • 8. Re: Lint1 Error on HP DL385
                        kreischl Expert

                        We received the same VMWARE error and our RSA adapter pointed to the Qlogic board in PCI Slot 1.

                        • 9. Re: Lint1 Error on HP DL385
                          Polar_Bear Lurker

                          H/W -> HP DL580G5 , ESX

                           

                          ESX Server Ver. 3.5.0 Build 110268

                           

                           

                           

                          Error -> 3:03:17:11.191 CPU0:1024)APIC:1382:Lint1 interrupt on pcpu0(port x6) contains 0xb1

                           

                           

                          I don't know this error message. I need your help. plz. help me~

                          • 10. Re: Lint1 Error on HP DL385
                            ekos Novice

                             

                            Hi all,

                             

                             

                            We are expiriencing the exactly the same error. We have a DL380 with a Qlogic 4050c and ESX 3.5 110268 installed.

                            Did anyone already solve this issue ?

                             

                             

                            Cheers

                             

                             

                            • 11. Re: Lint1 Error on HP DL385
                              eirwave Lurker

                               

                              Hi.

                               

                               

                              We have the same error message on one of our DL580 servers. Did you find a solution to the problem?

                               

                               

                               

                               

                               

                              Thanks,

                               

                               

                              Eirik

                               

                               

                              • 12. Re: Lint1 Error on HP DL385
                                JPBoucher Lurker

                                 

                                Hi guys,

                                 

                                 

                                Sorry about the late response,  just got on that thread,  VMWare is very delicate with memory,  All memory dimms must be from the same vendors,  it doesn't matter if all dimms are the same part number and has the same caracteristics,  it HAS TO BE FROM THE SAME VENDOR.

                                 

                                 

                                • 13. Re: Lint1 Error on HP DL385
                                  jbrown9999 Novice

                                  The same manufacturer thing doesn't fly.  I have all Kingston RAM and I just got this error.  apic 1382 lint1 interrupt on pcpu"