1 2 Previous Next 17 Replies Latest reply on Jan 27, 2020 9:10 PM by Amin Masoudifard

    Want to set up multiple VLANS between Switch and ESXi 6.7U3

    davidrough Novice

      Struggling to get VLANs to work.

       

      I have a couple of different LAB environments I want to set up on a singlw ESXi server.

       

      I have set up the following:

      Screenshot 2020-01-26 at 01.13.41.png

      Assigned uplinks 1,2,3 for use for LABS

      Here are the physical NICs:

      Screenshot 2020-01-26 at 01.14.42.png

      I then setup a Port Group as follows:

       

      Screenshot 2020-01-26 at 01.16.38.png

      Screenshot 2020-01-26 at 01.17.30.png

       

      On the Ubiquiti Controller I have set the following Network up for VLAN 4:

      Screenshot 2020-01-26 at 01.19.54.png

       

      When I assign port group LAB - ALPINE to the VM there is no network connection at all and no suggestion VLAN ID is being used. I can set a static IP of 10.0.0.1/24 but the VM is not physically bound to this network.

       

      Screenshot 2020-01-26 at 01.21.20.png

      vmnic1, vmnic2, vmnic3 are plugged in to a 24 Port switch with the 3 ports aggregated but not assigned to any particular network.

       

      Any help on what to do here. I've used pfsense in the past to achieve something similar however would rather not use pfsense this time unless I need to.

        1 2 Previous Next