FC module replaced.

[vivekrishna]

Hi,

We have replaced a single FC module of our SAN switch and after replacing the Vmware hosts are not sending traffic through that port. Do we need to reboot all esxi hosts for them to communicate through that new port.

Rescan of the HBA dont work.

Thanks,

Vivek

[sjesse]

You should move this to the vsphere section, this really has nothing to do with Horizon. If you replaced it on the san switch, there isn't anything on esxi that you can do other than a rescan. You'll need to review the san config and make sure the a compatabile part was used.. We replaced one a few months ago, and all that was needed was a rescan.