Hi All,
Im upgrading host capacity on my environment from two hosts to three. Im using a HP2040 SAN with 10GB SFP+ Controllers. Currently connected to the hosts directly using DAC cables.
I tried to introduce a couple of SFP+ switches so that I could add the additional host. However when i plug a hosts HBA into the switch (and reboot) the HBA disappears for the storage adaptor list. If I plug it back into the SAN directly (and reboot) the host, the HBA reappears.
Any ideas what could cause this?
I found the issue to be the DAC cables. Although HP Compatible and same part number, they did not work
I found the issue to be the DAC cables. Although HP Compatible and same part number, they did not work