2 people found this helpful
Do you have any active VMs connected to logical switches on that node yet? The Geneve tunnels used by NSX-T don't get established until there's a VM connected to a logical switch on the given node so while it can be kind of misleading, it'll show the tunnel status as "down" until it actually has a reason to form the tunnel.
Edge transport node down is also because no VMs? Or just will cause host TN down if no VMs?
Edge node TNs will show the tunnel as "up" once you've got a router deployed to them. Otherwise, they show the status as "unknown".
Thanks. Do you have any ideas why the bond status in TN is unknown or down?
I had a doubt, since its the first time, i am setting up NSX-T, i am not able to establish the connection between Tier0 and Tier1 even after the Linked Ports are set, is it because of the Transport Node, since there is no Transport Node attached to Tier1 Router.
please do share, if you have any documents to troubleshoot this scenarios.
This appears to show that it is connected so when you say you can't establish the connection, are you referring to end to end reachability of networks behind the Tier 1 router? If so, be aware that by default the T1 router doesn't advertise any of the connected networks upstream so the first thing to check would be to ensure that you've enabled route advertisement under the "routing" tab of the Tier 1 router so that it looks like this:
Yes, i have enabled all this, still i m not able to reach tier1 from tier0, I have also added a couple of static routes on Tier0 since Tier0 uplink is on different subnet, the Intra Tier0 to Tier1 is on a different subnet, which is the Computer generated switch with 100 series and Tier1 is on a different subnet.
Even after applying so many Static routes to achieve Connectivity, it fails to ping the Tier0 Intra subnet and Tier1 subnet.
On the Edge Console, when you access the Tier0 and get routes, the Output is only via 192.168.x.x
How do i confgiure this, so that i will be able to communicate
Please give your inputs