In regards to the driver and firmware version specified on the vSAN HCL, must you always stick with that exact version, or are newer version of the firmware/driver always supported and recommended?
I have always stuck with EXACTLY what is says, but I thought I would ask.
Hello wreedMH
"or are newer version of the firmware/driver always supported and recommended?"
Short answer: No - it will be on the HCL when it is supported.
Only for firmware of drives does the HCL specify 'minimum' firmware and thus later version being fine - for anything else this not the same: go with what is on the HCL in the matching driver/firmware pairs and configuration it states (e.g. AF!=Hybrid, Passthrough!=RAID0).
Bob
Hello wreedMH
"or are newer version of the firmware/driver always supported and recommended?"
Short answer: No - it will be on the HCL when it is supported.
Only for firmware of drives does the HCL specify 'minimum' firmware and thus later version being fine - for anything else this not the same: go with what is on the HCL in the matching driver/firmware pairs and configuration it states (e.g. AF!=Hybrid, Passthrough!=RAID0).
Bob
Thanks Bob as always for the quick reply!