2 Replies Latest reply on Mar 13, 2018 11:28 AM by thecloudxpert

    VSAN SIzing

    balagbm2017 Enthusiast

      Any one done VSAN sizing from the new VSAN Sizing tool.  ?? I have couple of clarifications.  The total CPU Core requirements was 100 Cores , I have selected 32 core/per server without doing any FTT=1 /5 calculation it would required minimum 4 Hosts. However the total hardware requirements itself its coming 4 Hosts including 1 host failure.  Can any one suggest me??

        • 1. Re: VSAN SIzing
          balagbm2017 Enthusiast

          Attached the sizing report from VSAN towards the below high level requirements.

           

          Total No. of VMs is 145 .
          Total no. of physical cores = 180 Physical Cores (Assumed 1pCPU = 4 vCPU)
          Total memory = 2300GB
          Total storage = 25TB

           

          The reports shows I need 5 Servers,  however the total cpu core required is 180 . The reports give 5 servers ( each one is having 24 cores, in total I will get only 24* 5= 120 cores).. something is not working in the sizing tool or I am missing something. Kindly advise guys.

          • 2. Re: VSAN SIzing
            thecloudxpert Enthusiast
            vExpert

            If you have 24 pCores x 5 servers you more than likely have (at least) x2 - x4 that amount of vCPUs.

             

            So with 2:1 contention that is 240 vCPUs and with 4:1 that is 480 vCPUs

             

            You have chosen a Fault Tolerance Method of RAID5 therefore the minimum number of hosts is 4.

             

            You have chosen Host Failures to Tolerate = 1 therefore 4+1 = 5 hosts.