for example max number of machine for me is 6 is that your means do these steps :
1 - delete one of them with click on that machine from admin panel and select delete from disk
2 - change max number of machine from 6 to 5 ?
is that correct and enough ????
No..that is just a sample screenshot You need to check at any given point of time how many machines are available.
>For example if your pool size is 15 -that is the maximum desktop VM's for that pool.
>Number of spare machines ( For eg : 5) will decide how many machines should be powered on at any given point of time as long as rest of the configurations are correct.-
Above is for Pool sizing and now you should choice if these machines should be Provisioned Up front or On Demand - Assuming that we are going with 10 machines as On-demand . You will always see 5 machines Powered on and rest 10 would kick in based on user demand.- whenever a new machine gets provisioned,spare count will decrease and as per the setting it would deploy another spare machine.
i have attached a pic from my pool
max number of machine =7
spare = 1
now i have just 5 desktop on this pool and want delete 2 of from these 5 machine also enable provisioning in unchecked
i know if checked enabled provisioning it will be automatically create all of them and will be increased from 5 o 7 now if i check enable provisioning where do i have to do config that can delete vm and it don't provision a new vm ?
AFAIK if you put spare count as 0 ,in this case it should not provision any machines upfront.