- VMware Technology Network
- :
- Cloud & SDDC
- :
- ESXi
- :
- ESXi Discussions
- :
- Server SAS Connection Error And Esxi Disk Partitio...
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Server SAS Connection Error And Esxi Disk Partition table dose not recognize.
Work for 7 years esxi 4.0 on Dell Server.Not Raid.
This week has planed electric shutdown all building.
Before planed shutdown, server shuteddown on manually.
After planed shutdown,server power on.
but monitor detected "SAS Connection Error 0x02".
thus I reconnect SAS cable,but I have same Error.
Because of Data Copy first,I picked HDD(Corrupted) up from server.
And Connected OtherEsxiServer - USB - HDD(Corrupted).
Check USB Connection on other esxi server.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~ # lsusb
Bus 01 Device 02: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge < this is USB connected HDD
Bus 01 Device 01: ID 1d6b:0002 Linux Foundation 2.0 root hub
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Check recog as disk
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~ # ls /dev/disks/
~ # ls /dev/disks/
mpx.vmhba1:C0:T0:L0 vml.0000000000766d686261313a303a30 <== this is Server HDD
mpx.vmhba1:C0:T0:L0:1 vml.0000000000766d686261313a303a30:1
mpx.vmhba1:C0:T0:L0:2 vml.0000000000766d686261313a303a30:2
mpx.vmhba1:C0:T0:L0:3 vml.0000000000766d686261313a303a30:3
mpx.vmhba1:C0:T0:L0:5 vml.0000000000766d686261313a303a30:5
mpx.vmhba1:C0:T0:L0:6 vml.0000000000766d686261313a303a30:6
mpx.vmhba1:C0:T0:L0:7 vml.0000000000766d686261313a303a30:7
mpx.vmhba1:C0:T0:L0:8 vml.0000000000766d686261313a303a30:8
mpx.vmhba34:C0:T0:L0 vml.0000000000766d68626133343a303a30 <== this is USB connected HDD
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Detect partition table USB Connected HDD
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~ # partedUtil getptbl /dev/disks/mpx.vmhba34\:C0\:T0\:L0
Error: The device /dev/disks/mpx.vmhba34:C0:T0:L0 has zero length, and can't possibly store a file system or partition table. Perhaps you selected the wrong device?
Unable to get device /dev/disks/mpx.vmhba34:C0:T0:L0
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
How to recog Partition Table.
Please Help.