Hello,
Has anyone here had any luck getting CLI drive identification working with ESXi 6.0 U2 Build 3620759 for LSI MegaRaid Controllers - 9280-24i4e or 9361-8i?
I've installed MegaCLI/sas2ircu but not having much luck getting any information back about the controllers?
[root@host:~] esxcli software vib list | grep -i "LSI"
lsiprovider 500.04.V0.59-0004 LSI VMwareAccepted 2016-07-11
vmware-esx-MegaCli-8.07.07 8.07.07-01 LSI PartnerSupported 2016-07-19
vmware-esx-sas2ircu 20.00.00.00-03 LSI PartnerSupported 2016-07-19
lsi-mr3 6.605.08.00-7vmw.600.1.17.3029758 VMware VMwareCertified 2016-07-11
lsi-msgpt3 06.255.12.00-8vmw.600.1.17.3029758 VMware VMwareCertified 2016-07-11
lsu-lsi-lsi-mr3-plugin 1.0.0-2vmw.600.0.11.2809209 VMware VMwareCertified 2016-07-11
lsu-lsi-lsi-msgpt3-plugin 1.0.0-1vmw.600.0.0.2494585 VMware VMwareCertified 2016-07-02
lsu-lsi-megaraid-sas-plugin 1.0.0-2vmw.600.0.11.2809209 VMware VMwareCertified 2016-07-11
lsu-lsi-mpt2sas-plugin 1.0.0-4vmw.600.1.17.3029758 VMware VMwareCertified 2016-07-11
lsu-lsi-mptsas-plugin 1.0.0-1vmw.600.0.0.2494585 VMware VMwareCertified 2016-07-02
[root@host:~]
However when I run ./sas2ircu LIST I get the following -
[root@host:~] ./opt/lsi/bin/sas2ircu LIST
LSI Corporation SAS2 IR Configuration Utility.
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved.
SAS2IRCU: MPTLib2 Error 1
[root@host:~]
with MegaCli I dont get much more. Both -h return results but neither seem to be able to query the controllers.
I do have MSM Storage Manager running on a VM on the host with the SLP helper which allows me to access the controllers/drives etc.
On a maybe unrelated side note, the 9361-8i shows correctly under Health Status, however the 9280-24i4e shows the controllers and gradually adds a few of the drives (15mins, post boot to add the first one and even after 24hrs its only seeing 48 of the 60 drives) - I've already got a call open with LSI on this one.
Anyone any ideas?
Thanks
Did you ever get this resolved?