-
1. Re: NSX-MH vs NSX-V
Richardson Porto Feb 4, 2016 4:42 AM (in response to MEDK83)What kind of hypervisor you will use ? vSphere or any other flavor (Hyper-V, KVM) ?
---
Richardson Porto
Senior Infrastructure Specialist
LinkedIn: http://linkedin.com/in/richardsonporto -
2. Re: NSX-MH vs NSX-V
Abhilashhb Feb 4, 2016 5:53 AM (in response to MEDK83)Hi MEDK83,
Welcome to VMware Communities.
Check this below link. There is one slide on the key differences between NSX-V and NSX-MH.
------------------------------------------------------------------------------------------------------------------------------------
If you find this or any other answer useful please mark the answer as correct or helpful.
Abhilash HB
| Blog : http://vpirate.in | Twitter : @abhilashhb |
-
3. Re: NSX-MH vs NSX-V
MEDK83 Feb 5, 2016 3:28 AM (in response to MEDK83)Hello and thank you very much,
Can we integrated NSX-V with 3-party vendors like HP, Cisco ... with ovsdb, if yes how can we make this integration ?
because I could not find any official document talk about ovsdb/openflow in NSX-V, but I found in this blog:VMware NSX 6.2: Enterprise Automation, Security and Application Continuity - The Network Virtualization Blog - VMware Bl, talking about ovsdb added in NSX-V 6.2.
I searched again in Wat's new of NSX 6.2 but I didn't find this information.
-
4. Re: NSX-MH vs NSX-V
MEDK83 Feb 5, 2016 3:29 AM (in response to Richardson Porto)VMware but I need integrate HW VTEP
-
5. Re: NSX-MH vs NSX-V
Richardson Porto Feb 5, 2016 3:49 AM (in response to MEDK83)See this another thread: Re: How can i connect a hardware VTEP gateway to a NSX controller?
---
Richardson Porto
Senior Infrastructure Specialist
LinkedIn: http://linkedin.com/in/richardsonporto -
6. Re: NSX-MH vs NSX-V
MEDK83 Feb 5, 2016 6:19 AM (in response to Richardson Porto)Hi,
According to this thread "there is no OVSDB support in NSX for vSphere, so at the moment only way to connect 3rd party VTEPs to NSX-v VXLAN is to configure them on to same multicast group as NSX-v VTEPs to use multicast replication".
-
7. Re: NSX-MH vs NSX-V
Sean Howard Feb 7, 2016 6:38 PM (in response to MEDK83)Hi MEDK83
According to this thread "there is no OVSDB support in NSX for vSphere, so at the moment only way to connect 3rd party VTEPs to NSX-v VXLAN is to configure them on to same multicast group as NSX-v VTEPs to use multicast replication"
That is no longer the case. That thread is old, and is referring to the situation before NSX 6.2 came out in September 2015.
-
8. Re: NSX-MH vs NSX-V
yuyangwang Nov 16, 2017 2:32 AM (in response to MEDK83)hi ,who know how to use nsx-mh to connect xenserver ?
thanks!
-
9. Re: NSX-MH vs NSX-V
Sateesh_vCloud Nov 28, 2017 10:40 AM (in response to yuyangwang)VMware has announced End of Availability (EOA) of the NSX Multi-Hypervisor product effective 8/19/2014 The product has also reached End of General Support (EOGS) as of 10/15/2016. Customers using NSX Multi-Hypervisor are recommended to migrate to NSX-T or NSX for vSphere based on their desired feature set.
https://my.vmware.com/group/vmware/info?slug=networking_security/vmware_nsx/4_x
-
10. Re: NSX-MH vs NSX-V
yuyangwang Nov 30, 2017 8:00 PM (in response to Sateesh_vCloud)hi the nsx-t can support xenserver?thanks!