VMware Cloud Community
MikeyByte
Contributor
Contributor
Jump to solution

Vmware 5.5 Upgrade Breaks access to VMFS Datastore (Sort of)

Now before I get to far, I will say I am quite sure that the host I am doing this on IS NOT on the HCL.

(why I am running old hardware? - its a community organization that I volunteer for that relies on dontated hardware)

However please read on.

Upgraded an IBM x3500 and an x3650 (same generation - they are basically tower and rack mount versions of the same kit) from esxi 5.1 to 5.5.

(Exactly the same issue on both)

Local Storage - IBM Serveraid (aacraid)

I was a bit confused as the disk controllers and luns still show as visible (just no VMFS recognised no matter how many times I rescan).

(normally the luns don’t appear because of a driver not working)

I found I was able to get the luns to come up by doing

“Add Storage”

“Disk/LUN”

(Takes 30-60 seconds then shows the luns)

1.png

It shows the disk arrays, I then click next and I select “Mount disk and keep signature” ..

2.png

The lun then comes up fine and everything works.

However rebooting it gets lost again and I have to repeat the process to get the VMFS volumes to come back.

Possible related entries in vmkernel.log

2014-04-22T19:56:42.265Z cpu2:33418)module heap vmklnx_aacraid: creation succeeded. id = 0x410a640c1000

2014-04-22T19:56:42.265Z cpu2:33418)<6>Adaptec aacraid driver 1.2.1.30300

2014-04-22T19:56:42.265Z cpu2:33418)PCI: driver aacraid is looking for devices

2014-04-22T19:56:42.265Z cpu2:33418)DMA: 612: DMA Engine 'vmklnxpci-0:3:0.0' created using mapper 'DMANull'.

2014-04-22T19:56:42.265Z cpu2:33418)DMA: 612: DMA Engine 'vmklnxpci-0:3:0.0' created using mapper 'DMANull'.

2014-04-22T19:56:42.308Z cpu2:33418)IRQ: 540: 0x2b <aacraid> sharable, flags 0x10

2014-04-22T19:56:42.308Z cpu2:33418)VMK_VECTOR: 218: Registered handler for shared interrupt 0xff2b, flags 0x10

2014-04-22T19:56:43.984Z cpu2:33418)<6>aacraid0: kernel 5.2-0[17003] Jul 25 2011

2014-04-22T19:56:43.984Z cpu2:33418)<6>aacraid0: monitor 5.2-0[17003]

2014-04-22T19:56:43.984Z cpu2:33418)<6>aacraid0: bios 5.2-0[17003]

<6>aacraid0: serial

2014-04-22T19:56:44.000Z cpu2:33418)VMK_PCI: 395: Device 0000:03:00.0 name: vmhba1

2014-04-22T19:56:44.000Z cpu2:33418)DMA: 612: DMA Engine 'vmhba1' created using mapper 'DMANull'.

2014-04-22T19:56:44.000Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C0:T0:L0': Vendor: 'ServeRA '  Model: 'SAS1            ' Rev: 'V1.0'

2014-04-22T19:56:44.000Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C0:T0:L0': Type: 0x0, ANSI rev: 2, TPGS: 0 (none)

2014-04-22T19:56:44.000Z cpu2:33418)ScsiUid: 273: Path 'vmhba1:C0:T0:L0' does not support VPD Device Id page.

2014-04-22T19:56:44.000Z cpu2:33418)ScsiScan: 1105: Path 'vmhba1:C0:T0:L0' : No standard UID: Failure. ANSI version 'SCSI-2' (0x2).

2014-04-22T19:56:44.000Z cpu2:33418)VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

0x39 0x62 0x34 0x63 0x61 0x30 0x61 0x63 0x53 0x41 0x53 0x31 0x20 0x20

2014-04-22T19:56:44.000Z cpu2:33418)ScsiScan: 1503: Add path: vmhba1:C0:T0:L0

2014-04-22T19:56:44.000Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C0:T1:L0': Vendor: 'ServeRA '  Model: 'SATA1           '  Rev: 'V1.0'

2014-04-22T19:56:44.000Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C0:T1:L0': Type: 0x0, ANSI rev: 2, TPGS: 0 (none)

2014-04-22T19:56:44.001Z cpu2:33418)ScsiUid: 273: Path 'vmhba1:C0:T1:L0' does not support VPD Device Id page.

2014-04-22T19:56:44.001Z cpu2:33418)ScsiScan: 1105: Path 'vmhba1:C0:T1:L0' : No standard UID: Failure. ANSI version 'SCSI-2' (0x2).

2014-04-22T19:56:44.001Z cpu2:33418)VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

0x39 0x37 0x39 0x38 0x61 0x30 0x61 0x63 0x53 0x41 0x54 0x41 0x31 0x20

2014-04-22T19:56:44.001Z cpu2:33418)ScsiScan: 1503: Add path: vmhba1:C0:T1:L0

2014-04-22T19:56:44.018Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C1:T0:L0': Vendor: 'IBM-ESXS'  Model: 'ST3300655SS     '  Rev: 'BA2D'

2014-04-22T19:56:44.018Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C1:T0:L0': Type: 0x0, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.020Z cpu2:33418)WARNING: ScsiScan: 1408: Failed to add path vmhba1:C1:T0:L0 : Not found

2014-04-22T19:56:44.021Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C1:T1:L0': Vendor: 'IBM-ESXS'  Model: 'ST3300655SS     '  Rev: 'BA2D'

2014-04-22T19:56:44.021Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C1:T1:L0': Type: 0x0, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.023Z cpu2:33418)WARNING: ScsiScan: 1408: Failed to add path vmhba1:C1:T1:L0 : Not found

2014-04-22T19:56:44.025Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C1:T2:L0': Vendor: 'IBM-ESXS'  Model: 'ST3300655SS     '  Rev: 'BA2D'

2014-04-22T19:56:44.025Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C1:T2:L0': Type: 0x0, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.027Z cpu2:33418)WARNING: ScsiScan: 1408: Failed to add path vmhba1:C1:T2:L0 : Not found

2014-04-22T19:56:44.029Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C1:T3:L0': Vendor: 'IBM-ESXS'  Model: 'VPBA300C3ETS11 N' Rev: 'A496'

2014-04-22T19:56:44.029Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C1:T3:L0': Type: 0x0, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.032Z cpu2:33418)WARNING: ScsiScan: 1408: Failed to add path vmhba1:C1:T3:L0 : Not found

2014-04-22T19:56:44.034Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C1:T4:L0': Vendor: 'HUA72202'  Model: '0ALA330         '  Rev: 'A34H'

2014-04-22T19:56:44.034Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C1:T4:L0': Type: 0x0, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.039Z cpu2:33418)WARNING: ScsiScan: 1408: Failed to add path vmhba1:C1:T4:L0 : Not found

2014-04-22T19:56:44.041Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C1:T5:L0': Vendor: 'HUA72202'  Model: '0ALA330         '  Rev: 'A34H'

2014-04-22T19:56:44.041Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C1:T5:L0': Type: 0x0, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.047Z cpu2:33418)WARNING: ScsiScan: 1408: Failed to add path vmhba1:C1:T5:L0 : Not found

2014-04-22T19:56:44.049Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C1:T6:L0': Vendor: 'HUA72202'  Model: '0ALA330 '  Rev: 'A34H'

2014-04-22T19:56:44.049Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C1:T6:L0': Type: 0x0, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.054Z cpu2:33418)WARNING: ScsiScan: 1408: Failed to add path vmhba1:C1:T6:L0 : Not found

2014-04-22T19:56:44.056Z cpu2:33418)ScsiScan: 976: Path 'vmhba1:C1:T7:L0': Vendor: 'HUA72202'  Model: '0ALA330         '  Rev: 'A3GA'

2014-04-22T19:56:44.056Z cpu2:33418)ScsiScan: 979: Path 'vmhba1:C1:T7:L0': Type: 0x0, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.061Z cpu2:33418)WARNING: ScsiScan: 1408: Failed to add path vmhba1:C1:T7:L0 : Not found

2014-04-22T19:56:44.844Z cpu3:33418)ScsiScan: 976: Path 'vmhba1:C3:T0:L0': Vendor: 'IBM     '  Model: 'SAS SES-2 DEVICE'  Rev: '1.11'

2014-04-22T19:56:44.844Z cpu3:33418)ScsiScan: 979: Path 'vmhba1:C3:T0:L0': Type: 0xd, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.845Z cpu3:33418)ScsiScan: 1503: Add path: vmhba1:C3:T0:L0

2014-04-22T19:56:44.874Z cpu3:33418)ScsiScan: 976: Path 'vmhba1:C3:T1:L0': Vendor: 'IBM     '  Model: 'SAS SES-2 DEVICE'  Rev: '1.11'

2014-04-22T19:56:44.874Z cpu3:33418)ScsiScan: 979: Path 'vmhba1:C3:T1:L0': Type: 0xd, ANSI rev: 5, TPGS: 0 (none)

2014-04-22T19:56:44.874Z cpu3:33418)ScsiScan: 1503: Add path: vmhba1:C3:T1:L0

2014-04-22T19:56:44.903Z cpu3:33418)PCI: driver aacraid claimed device 0000:03:00.0

2014-04-22T19:56:44.903Z cpu3:33418)PCI: driver aacraid claimed 1 device

2014-04-22T19:56:44.903Z cpu3:33418)ScsiNpiv: 1510: GetInfo for adapter vmhba1, [0x4108991c4400], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, sts=bad0020

2014-04-22T19:56:44.903Z cpu3:33418)Mod: 4780: Initialization of aacraid succeeded with module ID 4174.

2014-04-22T19:56:44.903Z cpu3:33418)aacraid loaded successfully.

2014-04-22T19:57:07.090Z cpu6:33204)ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba32:C0:T0:L0'

2014-04-22T19:57:07.090Z cpu6:33204)ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba0:C0:T0:L0'

2014-04-22T19:57:07.091Z cpu6:33204)ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C3:T1:L0'

2014-04-22T19:57:07.091Z cpu6:33204)ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C3:T0:L0'

2014-04-22T19:57:07.091Z cpu6:33204)ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C0:T1:L0'

2014-04-22T19:57:07.091Z cpu6:33204)ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C0:T0:L0'

2014-04-22T19:57:07.091Z cpu6:33204)ScsiUid: 273: Path 'vmhba1:C0:T0:L0' does not support VPD Device Id page.

2014-04-22T19:57:07.092Z cpu6:33204)VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

0x39 0x62 0x34 0x63 0x61 0x30 0x61 0x63 0x53 0x41 0x53 0x31 0x20 0x20

2014-04-22T19:57:07.092Z cpu6:33204)vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: Changing active path from NONE to vmhba1:C0:T0:L0 for device "Unregistered Device".

2014-04-22T19:57:07.092Z cpu6:33204)StorageApdHandler: 698: APD Handle  Created with lock[StorageApd0x410899]

2014-04-22T19:57:07.092Z cpu6:33204)ScsiEvents: 501: Event Subsystem: Device Events, Created!

2014-04-22T19:57:07.092Z cpu6:33204)VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

0x39 0x62 0x34 0x63 0x61 0x30 0x61 0x63 0x53 0x41 0x53 0x31 0x20 0x20

2014-04-22T19:57:07.092Z cpu6:33204)ScsiDeviceIO: 7419: Get VPD 83 Inquiry for device "mpx.vmhba1:C0:T0:L0" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.092Z cpu6:33204)ScsiDeviceIO: 7455: Get VPD 86 Inquiry for device "mpx.vmhba1:C0:T0:L0" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.092Z cpu7:33204)ScsiDeviceIO: 6169: Could not detect setting of QErr for device mpx.vmhba1:C0:T0:L0. Error Failure.

2014-04-22T19:57:07.114Z cpu2:33204)FSS: 5092: No FS driver claimed device 'mpx.vmhba1:C0:T0:L0:1': Not supported

2014-04-22T19:57:07.114Z cpu2:33204)ScsiDevice: 3443: Successfully registered device "mpx.vmhba1:C0:T0:L0" from plugin "NMP" of type 0

2014-04-22T19:57:07.114Z cpu2:33204)ScsiUid: 273: Path 'vmhba1:C0:T1:L0' does not support VPD Device Id page.

2014-04-22T19:57:07.114Z cpu2:33204)VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

0x39 0x37 0x39 0x38 0x61 0x30 0x61 0x63 0x53 0x41 0x54 0x41 0x31 0x20

2014-04-22T19:57:07.114Z cpu2:33204)vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: Changing active path from NONE to vmhba1:C0:T1:L0 for device "Unregistered Device".

2014-04-22T19:57:07.114Z cpu2:33204)StorageApdHandler: 698: APD Handle  Created with lock[StorageApd0x410899]

2014-04-22T19:57:07.114Z cpu2:33204)ScsiEvents: 501: Event Subsystem: Device Events, Created!

2014-04-22T19:57:07.114Z cpu2:33204)VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

0x39 0x37 0x39 0x38 0x61 0x30 0x61 0x63 0x53 0x41 0x54 0x41 0x31 0x20

2014-04-22T19:57:07.114Z cpu2:33204)ScsiDeviceIO: 7419: Get VPD 83 Inquiry for device "mpx.vmhba1:C0:T1:L0" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.114Z cpu2:33204)ScsiDeviceIO: 7455: Get VPD 86 Inquiry for device "mpx.vmhba1:C0:T1:L0" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.115Z cpu2:33204)ScsiDeviceIO: 6169: Could not detect setting of QErr for device mpx.vmhba1:C0:T1:L0. Error Failure.

2014-04-22T19:57:07.154Z cpu2:33204)FSS: 5092: No FS driver claimed device 'mpx.vmhba1:C0:T1:L0:1': Not supported

2014-04-22T19:57:07.154Z cpu2:33204)ScsiDevice: 3443: Successfully registered device "mpx.vmhba1:C0:T1:L0" from plugin "NMP" of type 0

2014-04-22T19:57:07.156Z cpu2:33204)vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: Changing active path from NONE to vmhba1:C3:T0:L0 for device "Unregistered Device".

2014-04-22T19:57:07.156Z cpu2:33204)StorageApdHandler: 698: APD Handle  Created with lock[StorageApd0x410899]

2014-04-22T19:57:07.156Z cpu2:33204)ScsiEvents: 501: Event Subsystem: Device Events, Created!

2014-04-22T19:57:07.156Z cpu2:33204)VMWARE SCSI Id: Id for vmhba1:C3:T0:L0

0x50 0x05 0x07 0x6c 0x07 0xbf 0xe2 0x79 0x53 0x41 0x53 0x20 0x53 0x45

2014-04-22T19:57:07.156Z cpu2:33204)ScsiDeviceIO: 7409: Get VPD 80 Inquiry for device "naa.5005076c07bfe279" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.156Z cpu2:33204)ScsiDeviceIO: 7455: Get VPD 86 Inquiry for device "naa.5005076c07bfe279" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.166Z cpu3:32792)NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) to dev "naa.5005076c07bfe279" on path "vmhba1:C3:T0:L0" Failed: H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0. Act:EVAL

2014-04-22T19:57:07.166Z cpu3:32792)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.5005076c07bfe279" state in doubt; requested fast path state update...

2014-04-22T19:57:07.166Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e808916c0) 0x1a, CmdSN 0x24 from world 0 to dev "naa.5005076c07bfe279" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-04-22T19:57:07.187Z cpu3:32792)NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) to dev "naa.5005076c07bfe279" on path "vmhba1:C3:T0:L0" Failed: H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0. Act:EVAL

2014-04-22T19:57:07.207Z cpu2:33204)ScsiDeviceIO: 6169: Could not detect setting of QErr for device naa.5005076c07bfe279. Error Storage initiator error.

2014-04-22T19:57:07.217Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e808916c0) 0x1a, CmdSN 0x25 from world 0 to dev "naa.5005076c07bfe279" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-04-22T19:57:07.253Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e808916c0) 0x1a, CmdSN 0x26 from world 0 to dev "naa.5005076c07bfe279" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-04-22T19:57:07.289Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e808916c0) 0x1a, CmdSN 0x27 from world 0 to dev "naa.5005076c07bfe279" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-04-22T19:57:07.317Z cpu3:32792)NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) to dev "naa.5005076c07bfe279" on path "vmhba1:C3:T0:L0" Failed: H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0. Act:EVAL

2014-04-22T19:57:07.317Z cpu2:33204)ScsiDevice: 3443: Successfully registered device "naa.5005076c07bfe279" from plugin "NMP" of type 13

2014-04-22T19:57:07.318Z cpu2:33204)vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: Changing active path from NONE to vmhba1:C3:T1:L0 for device "Unregistered Device".

2014-04-22T19:57:07.318Z cpu2:33204)StorageApdHandler: 698: APD Handle  Created with lock[StorageApd0x410899]

2014-04-22T19:57:07.318Z cpu2:33204)ScsiEvents: 501: Event Subsystem: Device Events, Created!

2014-04-22T19:57:07.318Z cpu2:33204)VMWARE SCSI Id: Id for vmhba1:C3:T1:L0

0x50 0x05 0x07 0x6c 0x07 0xbf 0xe2 0x7b 0x53 0x41 0x53 0x20 0x53 0x45

2014-04-22T19:57:07.318Z cpu2:33204)ScsiDeviceIO: 7409: Get VPD 80 Inquiry for device "naa.5005076c07bfe27b" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.318Z cpu2:33204)ScsiDeviceIO: 7455: Get VPD 86 Inquiry for device "naa.5005076c07bfe27b" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.328Z cpu3:32792)NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) to dev "naa.5005076c07bfe27b" on path "vmhba1:C3:T1:L0" Failed: H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0. Act:EVAL

2014-04-22T19:57:07.328Z cpu3:32792)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.5005076c07bfe27b" state in doubt; requested fast path state update...

2014-04-22T19:57:07.328Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e808916c0) 0x1a, CmdSN 0x28 from world 0 to dev "naa.5005076c07bfe27b" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-04-22T19:57:07.350Z cpu3:32792)NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) to dev "naa.5005076c07bfe27b" on path "vmhba1:C3:T1:L0" Failed: H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0. Act:EVAL

2014-04-22T19:57:07.371Z cpu2:33204)ScsiDeviceIO: 6169: Could not detect setting of QErr for device naa.5005076c07bfe27b. Error Storage initiator error.

2014-04-22T19:57:07.381Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e808916c0) 0x1a, CmdSN 0x29 from world 0 to dev "naa.5005076c07bfe27b" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-04-22T19:57:07.417Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e808916c0) 0x1a, CmdSN 0x2a from world 0 to dev "naa.5005076c07bfe27b" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-04-22T19:57:07.453Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e808916c0) 0x1a, CmdSN 0x2b from world 0 to dev "naa.5005076c07bfe27b" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-04-22T19:57:07.479Z cpu3:32792)NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) to dev "naa.5005076c07bfe27b" on path "vmhba1:C3:T1:L0" Failed: H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0. Act:EVAL

2014-04-22T19:57:07.479Z cpu2:33204)ScsiDevice: 3443: Successfully registered device "naa.5005076c07bfe27b" from plugin "NMP" of type 13

2014-04-22T19:57:07.501Z cpu2:33204)ScsiUid: 273: Path 'vmhba0:C0:T0:L0' does not support VPD Device Id page.

2014-04-22T19:57:07.510Z cpu2:33204)VMWARE SCSI Id: Could not get disk id for vmhba0:C0:T0:L0

2014-04-22T19:57:07.510Z cpu2:33204)vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: Changing active path from NONE to vmhba0:C0:T0:L0 for device "Unregistered Device".

2014-04-22T19:57:07.511Z cpu2:33204)StorageApdHandler: 698: APD Handle  Created with lock[StorageApd0x410899]

2014-04-22T19:57:07.511Z cpu2:33204)ScsiEvents: 501: Event Subsystem: Device Events, Created!

2014-04-22T19:57:07.520Z cpu2:33204)VMWARE SCSI Id: Could not get disk id for vmhba0:C0:T0:L0

2014-04-22T19:57:07.520Z cpu2:33204)ScsiDeviceIO: 7409: Get VPD 80 Inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.520Z cpu2:33204)ScsiDeviceIO: 7419: Get VPD 83 Inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.520Z cpu2:33204)ScsiDeviceIO: 7455: Get VPD 86 Inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

2014-04-22T19:57:07.520Z cpu2:33204)ScsiDeviceIO: 6169: Could not detect setting of QErr for device mpx.vmhba0:C0:T0:L0. Error Medium not found.

2014-04-22T19:57:07.520Z cpu3:33204)ScsiDevice: 3443: Successfully registered device "mpx.vmhba0:C0:T0:L0" from plugin "NMP" of type 5

2014-04-22T19:57:07.521Z cpu4:33366)usb-storage: detected SCSI revision number 6 on vmhba32

2014-04-22T19:57:07.521Z cpu4:33366)usb-storage: patching inquiry data to change SCSI revision number from 6 to 2 on vmhba32

2014-04-22T19:57:07.521Z cpu4:33366)usb-storage: patching inquiry data to change removable media bit from 'off' to 'on' on vmhba32

2014-04-22T19:57:13.043Z cpu3:32792)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.5005076c07bfe279" state in doubt; requested fast path state update...

2014-04-22T19:57:13.043Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e80898f40) 0x1a, CmdSN 0xd0 from world 0 to dev "naa.5005076c07bfe279" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x5 0x20 0x0.

2014-04-22T19:57:13.081Z cpu3:32792)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "naa.5005076c07bfe27b" state in doubt; requested fast path state update...

2014-04-22T19:57:13.081Z cpu3:32792)ScsiDeviceIO: 2337: Cmd(0x412e80898f40) 0x1a, CmdSN 0xd1 from world 0 to dev "naa.5005076c07bfe27b" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x5 0x20 0x0.

2014-04-22T19:57:13.123Z cpu2:33204)LVM: 8355: Device mpx.vmhba1:C0:T1:L0:1 detected to be a snapshot:

2014-04-22T19:57:13.123Z cpu2:33204)LVM: 8362: queried disk ID: <type 1, len 14, lun 0, devType 0, scsi 0, h(id) 16746273972281211240>

2014-04-22T19:57:13.123Z cpu2:33204)LVM: 8369: on-disk disk ID: <type 0, len 10, lun 0, devType 0, scsi 0, h(id) 1308713170419776745>

2014-04-22T19:57:13.124Z cpu2:33204)LVM: 8355: Device mpx.vmhba1:C0:T0:L0:1 detected to be a snapshot:

2014-04-22T19:57:13.124Z cpu2:33204)LVM: 8362: queried disk ID: <type 1, len 14, lun 0, devType 0, scsi 0, h(id) 15010766293529110797>

2014-04-22T19:57:13.124Z cpu2:33204)LVM: 8369: on-disk disk ID: <type 0, len 10, lun 0, devType 0, scsi 0, h(id) 13427631733060988540>

2014-04-22T19:57:13.131Z cpu2:33204)FSS: 5092: No FS driver claimed device 'mpx.vmhba0:C0:T0:L0': Not supported

2014-04-22T19:57:13.155Z cpu2:33204)Vol3: 714: Couldn't read volume header from control: Not supported

2014-04-22T19:57:13.155Z cpu2:33204)Vol3: 714: Couldn't read volume header from control: Not supported

2014-04-22T19:57:13.155Z cpu2:33204)FSS: 5092: No FS driver claimed device 'control': Not supported

2014-04-22T19:57:13.202Z cpu2:33204)VC: 2059: Device rescan time 101 msec (total number of devices 5)

2014-04-22T19:57:13.202Z cpu2:33204)VC: 2062: Filesystem probe time 70 msec (devices probed 5 of 5)

2014-04-22T19:57:13.202Z cpu2:33204)VC: 2064: Refresh open volume time 0 msec

2014-04-22T19:57:14.826Z cpu3:32851)LVM: 13089: One or more LVM devices have been discovered.

Starting up services2014-04-22T19:57:16.014Z cpu0:32895)Tcpip_Vmk: 123: nd6_rs_timer: no routers on 'vmk0'. Giving up

2014-04-22T19:57:16.531Z cpu1:33651)VisorFSRam: 634: vsantraces with (0,300,0,0,755)

2014-04-22T19:57:16.531Z cpu1:33651)FSS: 6895: Mounting fs visorfs (4108aa584010) with -o 0,300,0,0,1,0755,vsantraces on file descriptor 4108af971220

Possible related entries in syslog.log

2014-04-15T04:50:20Z jumpstart: Storage Info: Unable to Mount VMFS volume with UUID 522a475e-80e96251-5f62-00215e4e123e. Sysinfo error on operation returned status : Bad parameter count. Please see the VMkernel log for detailed error information

2014-04-15T04:50:20Z jumpstart: Storage Info: Unable to Mount VMFS volume with UUID 522a4783-5bbdaecf-9237-00215e4e123e. Sysinfo error on operation returned status : Bad parameter count. Please see the VMkernel log for detailed error information

Anyone have any helpful thoughts ?

Thankyou!

0 Kudos
1 Solution

Accepted Solutions
continuum
Immortal
Immortal
Jump to solution

Either you need to resignature the volumes - or clean up all dead paths in your esx.conf


________________________________________________
Do you need support with a VMFS recovery problem ? - send a message via skype "sanbarrow"
I do not support Workstation 16 at this time ...

View solution in original post

0 Kudos
2 Replies
continuum
Immortal
Immortal
Jump to solution

Either you need to resignature the volumes - or clean up all dead paths in your esx.conf


________________________________________________
Do you need support with a VMFS recovery problem ? - send a message via skype "sanbarrow"
I do not support Workstation 16 at this time ...

0 Kudos
MikeyByte
Contributor
Contributor
Jump to solution

OK I tried removing what I could see in esx.conf but this didnt fix it.

Re-signaturing the volume did however - thankyou!


Can you please be a bit more specific about what sections in esx.conf need to be looked at ?

Ta.

0 Kudos