-
1. Re: can not reach the created ESX server
a.p. May 12, 2012 11:19 AM (in response to cactusgroup)1 person found this helpfulHow does your physical network configuration look like. Usually the 192.168.x.1 address is in use by routers (gateway address), so this could be a duplicate IP address issue!?
André
-
2. Re: can not reach the created ESX server
cactusgroup May 12, 2012 10:17 PM (in response to a.p.)no .
my local network adapters IP address is : 192.168.1.5
my VMware Network Adapter VMnet1 IP address is : 192.168.1.4
myVMware Network Adapter VMnet8 IP address is : 192.168.1.3
and my ESX server 3.0 IP address is 192.168.1.1
-
3. Re: can not reach the created ESX server
a.p. May 13, 2012 2:01 AM (in response to cactusgroup)1 person found this helpfulThere's something wrong with the network settings for the virtual networks. Did you modify them manually?
By default the address range for "Host-Only" (vmnet1) and "NAT (vmnet8) and the local network are different. I'd recommend you reset the virtual network to default and then set an appropriate IP address from the configured network (Bridged, Host-Only or NAT) for the ESX VM.
André
-
4. Re: can not reach the created ESX server
cactusgroup May 13, 2012 9:15 PM (in response to a.p.)Im sooooooooooooooo dump .....................!!!!
it was just a firewall problem!!!!!!
thank you all