Hi There,
An apology if this has already been posted. If so please point me to the thread but I just wanted to confirm with you guys the jumbo frames support on VI3 3.5.
As far as I know Jumbo frames are not supported for software iSCSI but it is SUPPORTED for hardware iSCSI initiators but please correct me if I am wrong here. Now what hardware initiator would you recommend for jumbo frames?
Thanking you in advance,
Saludos,
Jose Maria Gonzalez,
-
http://www.JmGVirtualConsulting.com
http://www.josemariagonzalez.es
VMware vExpert 2009
Co-autor del Libro VMware Site Recovery Manager 1.0 update1
-
If you find this or any other answer useful please consider awarding points by marking the answer helpful or correct.
[VMware Site Recovery Manager 1.0 update1|http://feedproxy.google.com/ElBlogDeVirtualizacionEnEspanol]
In ESX 3.5, 10 gigabit Ethernet and jumbo frame are NOT supported on storage traffic (for example software initiator).
In ESX 4 are supported.
Andre
**if you found this or any other answer useful please consider allocating points for helpful or correct answers
As far as I know Jumbo frames are not supported for software iSCSI but it is SUPPORTED for hardware iSCSI initiators but please correct me if I am wrong here.
True (for ESX 3.5). Also are supported for VM traffic.
Now what hardware initiator would you recommend for jumbo frames?
Have a look at HCL (I remember only a Qlogic card).
Or use ESX 4.
Andre
**if you found this or any other answer useful please consider allocating points for helpful or correct answers
Hi Andre,
Thanks for your prompt replay. Could you confirm to me if 10 gigabit Ethernet and jumbo frame are supported by the VMware software initiator or is it only supported in ESX 4.0?
Saludos,
Jose Maria Gonzalez,
-
VMware vExpert 2009
Co-autor del Libro VMware Site Recovery Manager 1.0 update1
-
If you find this or any other answer useful please consider awarding points by marking the answer helpful or correct.
[VMware Site Recovery Manager 1.0 update1|http://feedproxy.google.com/ElBlogDeVirtualizacionEnEspanol]
In ESX 3.5, 10 gigabit Ethernet and jumbo frame are NOT supported on storage traffic (for example software initiator).
In ESX 4 are supported.
Andre
**if you found this or any other answer useful please consider allocating points for helpful or correct answers
Thanks Andre, much appreciated.
Saludos,
Jose Maria Gonzalez,
-
VMware vExpert 2009
Co-autor del Libro VMware Site Recovery Manager 1.0 update1
-
If you find this or any other answer useful please consider awarding points by marking the answer helpful or correct.
[VMware Site Recovery Manager 1.0 update1|http://feedproxy.google.com/ElBlogDeVirtualizacionEnEspanol]
You're welcome.
Andre