Converter Error: Failed to clone volume 'C:'.

[jdoll66]

Testing out the vCenter Converter Standalone client. Ver 4.0.0. Build 146302.

Target is a Win2K3 Standard 32-bit server. Anyone ever see these errors before?

#4] Unable to get bad blocks extents for
?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1\. Error: 5

BlockLevelVolumeCloningTaskImpl::ExcludeSystemRestoreFiles Excluding System Restore file:
?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1\System Volume Information\1{3808876b-c176-4e48-b7ae-04046e6cc752}

Unable to get file extents for
?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1\System Volume Information\1{3808876b-c176-4e48-b7ae-04046e6cc752}. Error: 5

Skipping file extents at 4300042240 length 2145386496

Skipping file extents at 7174856704 length 2148532224

For step 0 stepSkipUnusedClusters = 1

NfcNetTcpRead: timed out waiting for data

NfcFssrvrRecv: failed with code = 9

NfcFssrvr_DiskIo: failed to receive io reply

DISKLIB-LIB : RWv failed ioId: #10 (290) (34) .

Error 4641 writing to the destination volume

BackgroundWriter::ThreadFunc: write failed.

Would I have better luck using VC plug-in? Thanks is advance for your assistance.

[jdoll66]

Found the reason for the failure. Server NIC was set to auto, port set at 100Mb/full. set NIC to match port and the conversion has taken off.

[Anky123]

hi,

it seems your suggestion to chage link speed is working for me. Let me knwo from where did you get this error and could rectify the problem? what logs did you check?