VMware Cloud Community
mostfaleoni
Contributor
Contributor
Jump to solution

network uplink redundancy lost \Network connectivty lost

Hello,

I have to hp servers and they down due to electrical problem  and after they up i got these

(network uplink redundancy lost \Network connectivty lost)

and i have on each server 1 standerd switch 8 vmnic 4 wrkking and 4 standby  and i checked all but i didn't found any problems on any

so please can anybody advice what is the problem

Thnx all for your support

0 Kudos
1 Solution

Accepted Solutions
sa2057
Hot Shot
Hot Shot
Jump to solution

Hi,

Try alarm reset to green..

Thanks

SA

View solution in original post

0 Kudos
6 Replies
vMario156
Expert
Expert
Jump to solution

Did you clear the alarms after your electrical problem?

Regards,

Mario

Blog: http://vKnowledge.net
0 Kudos
mostfaleoni
Contributor
Contributor
Jump to solution

Hello, Mario

No, i didn't

0 Kudos
vMario156
Expert
Expert
Jump to solution

Try this and check out if the alarm comes up again.


But as you said in your network configuration everything looks fine (no disconnected nics anymore), I think thats may just the "old" alarm during your problem. This you should also be able to verfiy by taking a look on the timestamp.

Regards,

Mario

Blog: http://vKnowledge.net
mostfaleoni
Contributor
Contributor
Jump to solution

I set alarm as acknowledge alarm yesterday but it is not disappear

0 Kudos
sa2057
Hot Shot
Hot Shot
Jump to solution

Hi,

Try alarm reset to green..

Thanks

SA

0 Kudos
mostfaleoni
Contributor
Contributor
Jump to solution

Hello,

disappear  and didn't return back.

Thnx for your support

0 Kudos