upgrade esxi 6.5 to 7.0.3 with a customized iso file, incomaptible VIBS missing dependencies (LCM)

[hidole]

after a compliance check with esxi 7.0.3 (cisco customized iso) on a lifecycle manager,

it says the upgrade has VIBs that are missing dependencies, (lots of bootbank files below)

should VIBs are removed or create a custom image (where to download below drivers/VIBs ?)

The upgrade has VIBs that are missing dependencies:
HPE_bootbank_hponcfg_6.0.0.5.5-0.37.2494585
HPE_bootbank_scsi-hpdsa_5.5.0.68-1OEM.550.0.0.1331820
HPE_bootbank_scsi-hpdsa_5.5.0.68-1OEM.550.0.0.1331820
HPE_bootbank_scsi-hpvsa_5.5.0.102-1OEM.550.0.0.1331820
HPE_bootbank_scsi-hpvsa_5.5.0.102-1OEM.550.0.0.1331820
HPE_bootbank_sutesxcli_6.5.0.2.8.0.0-12
HPE_bootbank_conrep_650.10.7.0.1-6.5.0.2494585
HPE_bootbank_bootcfg_6.0.0.02-06.00.16.2494585
HPE_bootbank_amshelpr_650.11.7.0.10-1.4240417
HPE_bootbank_fc-enablement_650.3.6.0.2-4240417
HPE_bootbank_amsd_650.11.7.1.3-1.4240417
HPE_bootbank_oem-build_650.U3.10.7.5.2-4240417
HPE_bootbank_testevent_6.5.0.02-01.00.9.4240417
HPE_bootbank_ilo_650.10.7.0.4-1OEM.650.0.0.4240417
DEL_bootbank_dell-configuration-vib_6.5-3A06
HPE_bootbank_ilorest_650.3.1.0.35-4240417
HPE_bootbank_sut_6.5.0.2.8.0.0-20
MIS_bootbank_hpessacli_5.10.45.1-6.5.0.4240417.oem

Remove the VIBs or use Image Builder to create a custom upgrade ISO image that contains the missing dependencies, and try to upgrade again

[a_p_]

The host contains add-ons from HPE and Dell, and you are running a compliance check against a Cisco image!?

Provided that your host (hardware) is supported by ESXi 7.0, you may consider to reinstall it with the proper vendor customized ESXi image.

André

[hidole]

thank you for the advice, after removing all VIBs that don't have dependencies, the upgrade with the same customized ISO worked.