Hi,
I'm trying install ESXi 4.0.0-164009 on computer with Xenon processor on Intel mainboard SE7501CW2. But installer hangs, during booting. The ISO's MD5 is correct.
last message on screean.
....................
Module: install.tgz
Loading install.tgz..
Booting: MBI=0x00010120, entry=0x00100212
The "SE7501CW2" sounds like old stuff for 533mhz XEONs which dont offer support EM64T aka Intel64. ESX 4(i) can only installed on CPUs which have 64bit support.
Regards
Joerg
'Remember if you found this or others answers helpful do not forget to award points by marking an answer as helpful or correct'
Welcome to the forums - Have you confirmed that your hardware is on the HCL - http://www.vmware.com/resources/compatibility/search.php? Checking particulalry the I?O devices like storage and NIC - if it is not you can check the site vm-help.com as that it has informaiton on how to get non-supported to work -
If you find this or any other answer useful please consider awarding points by marking the answer correct or helpful
Do you have enabled VT function in BIOS (the name coud be different)?
Andre
**if you found this or any other answer useful please consider allocating points for helpful or correct answers
The "SE7501CW2" sounds like old stuff for 533mhz XEONs which dont offer support EM64T aka Intel64. ESX 4(i) can only installed on CPUs which have 64bit support.
Regards
Joerg
'Remember if you found this or others answers helpful do not forget to award points by marking an answer as helpful or correct'