Hi People,
Can anyone please assist me here with the ESX 4.1 inline upgrade into ESXi 5.1u1b on the local disk?
I have downloaded the VMware-VMvisor-Installer-5.1.0.update01-1065491.x86_64.iso to be loaded through HP iLO interface v2 (HP DL 380 G6) but it always end up with
iso linux disk error 80, AX = 42F0, drive 9F ?
The .iso file is not corrupted as I have verified from the 7-zip CRC test.
When upgrading an older system, the first thing to look at is firmware, particularly whether the iLO firmware is up to date.
Have you got the VT bit enabled in the BIOS? It's off by default on the G6 but you'll need it for ESXi 5.1.
Josh, this server has already got ESX 4.1u1 installed, so the VT enabled is already on.
Evening,
iso linux disk error 80, AX = 42F0, drive 9F ?
is a Linux bad read issue. The CRC may check out but the ISO may be bad at the source. I suggest redownloading the file to an alternate hard drive. Also make sure it's not on a removable usb type device. Otherwise it should work. The ISO is really only used during the initial loading of ESXi installer then it's all memory so something is getting copied bad.
Try re-download
Did you check the md5sum or sha1sum of the ISO with respect to value provided in download site?.
CD/ISO upgrade is always easy and safe method. Did you try by uploading the ISO to update manager and upgrade.
Also is this ISO used for any other installation or upgrade.
Well this is the error when I insert / mount the ISO file through the iLO console v2.
I just installed a bunch of G6 hosts this week through iLO and everything worked fine. Where do you have the .iso file stored (local disk or network share)?
Although this may not be the cause of this issue, check the iLO version (current iLO version is 2.15) and consider a host firmware upgrade.
André
Andre,
The ISO was in my local desktop drive, I guess this is due to the flaky network connection or old firmware.
So in this case I'll try to upgrade the firmware as per your suggestion and hopefully it should be fine from then.