Hi Guys,
We try to install the MegaRAID Storage Manager on VMware ESXi 4.0(IBM x3550 M2) for monitoring the Hard disk status but couldn't be able to install and it returned the error as attached
We followed the below steps as mentioned in the ibm website
1.6 Installing MegaRAID Storage Manager on a VMWare ESX Server
Perform the following steps to install MegaRAID Storage Manager on a
VMWare ESX Server:
1. Download the latest MSM from ibm.com
2. Unzip the package and copy MSM_linux_installer-501.01.tar.gz to a USB key.
3. From the ESX server, at root console, type the following command
to identify the USB device: fdisk –l
4. Type the following command: mount /dev/{name of your USB device} /mnt
5. Type the following command: cd /mnt
6. Type the following command to copy MSM_linux_installer-501.01.tar.gz to the opt
folder: cp MSM_linux_installer-501.01.tar.gz /opt
7. Type the following to unzip the package gunzip MSM_linux_installer-501.01.tar.gz
8. Type the following to untar the package tar –vxf MSM_linux_installer-501.01.tar
9. Change directories to the /opt/disk path
10. type ./vmware_install.sh to install MSM
11. Select VMware version
a. Enter 1 for Vmware 3.5 install
b Enter 2 for VMware 4.0 install
12. Select storlib option
a. enter n if you want to use the inbox storlib driver
b. enter y if you want to install the storlib packaged with MSM
IBM recommends 'y' is selected to use storlib packaged with MSM, selecting 'n' may
cause some functions of MSM not to work correctly
Could anyone please advise on how to proceed with the troubleshooting and the installation
Please find the error file as attached
Much appreciate your help
Thanks in Advance,
Regards,
Vignesh
hi - i am sure you are not using the right version for ESXi - this seems like more relevant to ESX(which had service console)
HTH
Hi HTH,
Thanks for your reply.
Could you please which version we should use for VMware ESXi 4.0 and is it possible to provide the Link.
Much appreciate your help
Warm Regards,
Vignesh
this link has the details
https://tinkertry.com/lsi92658iesxi5
basically you can check health from vsphere client or install the software on a windows machine and use the GUI to manage the LSI adapter.
hope this helps...:)