I have setup an enviornment to support AutoDeploy vShpere installations as describe in the vShpere documentation (vshpere 5.5) , my host are receiving the reserved ip addresses from the DHCP however they are not reaching a gpex startup and i receive the following errors concern the TFTP server
PXE-T01: File not found.
PXE-E3B: TFTP Error - File Not found
PXE-MOF: Exiting Intel PXE ROM.
I am able to browse and access the file https://autodeployhost:6501/vmw/rbd/tramp but unable to get to the hypervisor install.
#!gpxe
set retry-delay 20
post /vmw/rbd/host-register?bootmac=${mac}
Using WinAgents TFTP installed on the same server as with windows DHCP. the following errors are an example of what is returned in the winaAgents logs..
Server
12/24/2013 7:20:44 AM,Audit,"TFTP-FW: GET request, cookie = 0x0124EDCC"
12/24/2013 7:20:44 AM,Audit,"TFTP-FW: Session allocated, cookie = 0x0124EDCC, GET, from 172.26.12.195:2071, \\"undionly.kpxe.vmw-hardwired\\", \\"octet\\""
12/24/2013 7:20:44 AM,Error,"TFTP-FW: Error, cookie = 0x0124EDCC, hr = 0x80643101, File not found."
12/24/2013 7:20:44 AM,Error,"TFTP-FW: Session error, cookie = 0x0124EDCC, -2140917503, File not found."
12/24/2013 7:20:44 AM,Audit,"TFTP-FW: Session closed, cookie = 0x0124EDCC, status = 4, error = -2140917503"
Transfers logs
Start time Client Address File Mode Size Transferred Blocksize Timeout Status Description
12/26/2013 8:38:12 PM 172.26.12.195:2071 tramp octet ? 0 0 0 Requested file not found. Failed to download file from server. Requested file not found.
any help would be greatly appreciated..
