Hi,
I'm having a DL380G6 with two Qlogic hbas connected via an HP StorageWorks 8/8 switch.
As far as I can see the firmware versions of the hbas match the one in the HCL.
I'm running ESX 4u1 on the host side and it's setup with MRU paths.
I have a problem seeing the LUNs from the ESX side. When I do a rescan I get the following error messages in the vmkernel:
Nov 30 14:45:07 hk-vmsrv2 vmkernel: 0:03:29:26.869 cpu4:4117)WARNING: vmw_psp_fixed: psp_fixedUnclaimPath: Unable to find a preferred path in ACTIVE/STANDBY state.
Nov 30 14:45:07 hk-vmsrv2 vmkernel: 0:03:29:26.869 cpu4:4117)vmw_psp_mru: psp_mruSelectPathToActivateInt: Changing active path from NONE to vmhba1:C0:T0:L0 for device "naa.600c0ff000d8e3d80000000000000000".
Nov 30 14:45:07 hk-vmsrv2 vmkernel: 0:03:29:26.983 cpu10:4106)NMP: nmp_CompleteCommandForPath: Command 0x12 (0x41000801e940) to NMP device "mpx.vmhba3:C0:T0:L0" failed on physical path "vmhba3:C0:T0:L0" H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
Nov 30 14:45:07 hk-vmsrv2 vmkernel: 0:03:29:26.983 cpu10:4106)ScsiDeviceIO: 747: Command 0x12 to device "mpx.vmhba3:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.689 cpu2:4119)ScsiScan: 843: Path 'vmhba2:C0:T1:L0': Vendor: 'HP ' Model: 'MSA2324fc ' Rev: 'M110'
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.689 cpu2:4119)ScsiScan: 846: Path 'vmhba2:C0:T1:L0': Type: 0xd, ANSI rev: 5, TPGS: 1 (implicit only)
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.689 cpu2:4119)ScsiScan: 843: Path 'vmhba2:C0:T0:L0': Vendor: 'HP ' Model: 'MSA2324fc ' Rev: 'M110'
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.689 cpu2:4119)ScsiScan: 846: Path 'vmhba2:C0:T0:L0': Type: 0xd, ANSI rev: 5, TPGS: 1 (implicit only)
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.815 cpu10:4106)NMP: nmp_CompleteCommandForPath: Command 0x12 (0x410008034440) to NMP device "mpx.vmhba3:C0:T0:L0" failed on physical path "vmhba3:C0:T0:L0" H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.815 cpu10:4106)ScsiDeviceIO: 747: Command 0x12 to device "mpx.vmhba3:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.840 cpu8:4118)Vol3: 1488: Could not open device '4b139753-65ed976e-b3f2-0025b3dea3fc' for probing: No such target on adapter
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.840 cpu8:4118)Vol3: 608: Could not open device '4b139753-65ed976e-b3f2-0025b3dea3fc' for volume open: No such target on adapter
Nov 30 14:45:56 hk-vmsrv2 vmkernel: 0:03:30:15.840 cpu8:4118)FSS: 3702: No FS driver claimed device '4b139753-65ed976e-b3f2-0025b3dea3fc': Not supported
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.309 cpu2:4119)ScsiScan: 843: Path 'vmhba1:C0:T1:L0': Vendor: 'HP ' Model: 'MSA2324fc ' Rev: 'M110'
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.309 cpu2:4119)ScsiScan: 846: Path 'vmhba1:C0:T1:L0': Type: 0xd, ANSI rev: 5, TPGS: 1 (implicit only)
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.310 cpu2:4119)ScsiScan: 843: Path 'vmhba1:C0:T0:L0': Vendor: 'HP ' Model: 'MSA2324fc ' Rev: 'M110'
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.310 cpu2:4119)ScsiScan: 846: Path 'vmhba1:C0:T0:L0': Type: 0xd, ANSI rev: 5, TPGS: 1 (implicit only)
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.394 cpu4:4117)Vol3: 1488: Could not open device '4b139753-65ed976e-b3f2-0025b3dea3fc' for probing: No such target on adapter
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.394 cpu4:4117)Vol3: 608: Could not open device '4b139753-65ed976e-b3f2-0025b3dea3fc' for volume open: No such target on adapter
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.394 cpu4:4117)FSS: 3702: No FS driver claimed device '4b139753-65ed976e-b3f2-0025b3dea3fc': Not supported
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.855 cpu10:4106)NMP: nmp_CompleteCommandForPath: Command 0x12 (0x410008069800) to NMP device "mpx.vmhba3:C0:T0:L0" failed on physical path "vmhba3:C0:T0:L0" H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
Nov 30 14:45:58 hk-vmsrv2 vmkernel: 0:03:30:17.855 cpu10:4106)ScsiDeviceIO: 747: Command 0x12 to device "mpx.vmhba3:C0:T0:L0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
..and here's the HBA info:
root@xx-vmsrv2 scsi--# more qla2xxx/5
QLogic PCI to Fibre Channel Host Adapter for HPAK344A:
Firmware version 4.04.09 , Driver version 8.02.01-k1-vmw43
BIOS version 2.02
FCODE version 2.00
EFI version 2.01
Flash FW version 4.03.02
ISP: ISP2532
Request Queue = 0xdc0cc000, Response Queue = 0xdc14d000
Request Queue count = 4096, Response Queue count = 512
Total number of interrupts = 2191
Device queue depth = 0x20
Number of free request entries = 3705
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 1
Host adapter:loop state = <READY>, flags = 0x105ac3
Dpc flags = 0x0
MBX flags = 0x0
Link down Timeout = 008
Port down retry = 005
Login retry count = 008
Execution throttle = 2048
ZIO mode = 0x6, ZIO timer = 1
Commands retried with dropped frame(s) = 0
Product ID = 0000 0000 0000 0000
NPIV Supported : Yes
Max Virtual Ports = 255
SCSI Device Information:
scsi-qla1-adapter-node=50014380029cb6bd:150200:0;
scsi-qla1-adapter-port=50014380029cb6bc:150200:0;
FC Target-Port List:
scsi-qla1-target-0=217000c0ffd8bfb5;
scsi-qla1-target-1=257000c0ffd8bfb5;
FC Port Information:
scsi-qla1-port-0=208000c0ffd8bfb5:217000c0ffd8bfb5:150000:81;
scsi-qla1-port-1=208000c0ffd8bfb5:257000c0ffd8bfb5:150100:82;
Any idea what could be wrong?
Lars
