Hello!
I recently set up a ESXi 7.0 U3 for use with a HPE SAN (MSA 2050) of 120Tb.
I have created a LUN with the complete capacity (110Tb because of RAID) and connected it through a Mini-SAS cable from the SAN to the server (HPE ProLiant DL380 Gen 10).
ESXi sees the LUN, but at 100Tb only.
So I tried creating 2 LUNs instead, both of 55Tb each. ESXi still sees the LUNs, but at 50Tb each.
It's as if ESXi only sees 90% of the total LUN capacity.
I have tried to install ESXi with the HPE custom ISO, still same problem.
Any ideas?
Thanks!
I found the following link which is similar to your post. Let the community know if it helps.... https://communities.vmware.com/t5/vSphere-Storage-Discussions/vSphere-6-5-shows-MSA-2050-4-360-TB-vo...
I found the following link which is similar to your post. Let the community know if it helps.... https://communities.vmware.com/t5/vSphere-Storage-Discussions/vSphere-6-5-shows-MSA-2050-4-360-TB-vo...
Yes! That was the issue.
The SAN showed capacity in TB whereas VMWare shows capacity in TiB.
Thank you @compdigit44 !