DieterEhrenhoef
Contributor
Contributor

Error messages after updating to 7.0.2

Hello,

we are using vSphere 7.0.2 with Ultrapath 31.0.1 on our HyperMetro setup. Since we updated from 6.5 the hosts logs show the following errors:

 

 

2021-07-07T13:51:13.114Z cpu72:2102217)UPA-log: INTF_KLS_Log:1106: [11050][ERROR][PIA][PIA_TransfferScsiCmdResult][1280]cmd 72124 sn:0x30d9 not:0 op:0x85 from VHBA ticks{84331209, 84331209, 84371209, 0} {plun:16 p:2} {H:0x0 D:0x2 P:0x0 sk:0x5 sd:0x20/0}$

2021-07-07T13:51:13.114Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11051][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 72124 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {43} DevLunId{21} path {2}.

 

2021-07-07T13:51:13.114Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11052][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.114Z cpu72:2103208)UPA-log: INTF_KLS_Log:1106: [11053][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 72125 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {43} DevLunId{21} path {3}.

 

2021-07-07T13:51:13.114Z cpu72:2103208)UPA-log: INTF_KLS_Log:1106: [11054][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.119Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11055][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 60935 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {20} DevLunId{27} path {3}.

 

2021-07-07T13:51:13.119Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11056][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.120Z cpu23:2103206)UPA-log: INTF_KLS_Log:1106: [11057][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 60936 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {20} DevLunId{27} path {2}.

 

2021-07-07T13:51:13.120Z cpu23:2103206)UPA-log: INTF_KLS_Log:1106: [11058][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.125Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11059][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 85751 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {24} DevLunId{34} path {2}.

 

2021-07-07T13:51:13.125Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11060][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.125Z cpu72:2103208)UPA-log: INTF_KLS_Log:1106: [11061][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 85752 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {24} DevLunId{34} path {3}.

 

2021-07-07T13:51:13.125Z cpu72:2103208)UPA-log: INTF_KLS_Log:1106: [11062][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.130Z cpu72:2103208)UPA-log: INTF_KLS_Log:1106: [11063][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 104945 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {3} DevLunId{5} path {6}.

 

2021-07-07T13:51:13.130Z cpu72:2103208)UPA-log: INTF_KLS_Log:1106: [11064][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.130Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11065][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 104946 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {3} DevLunId{5} path {1}.

 

2021-07-07T13:51:13.130Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11066][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.136Z cpu72:2103208)UPA-log: INTF_KLS_Log:1106: [11067][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 85493 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {5} DevLunId{6} path {2}.

 

2021-07-07T13:51:13.136Z cpu72:2103208)UPA-log: INTF_KLS_Log:1106: [11068][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

2021-07-07T13:51:13.136Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11069][ERROR][LPM][LPM_CmdIoZeroPrintTrace][871]Cmd 85494 proto{scsi} op:0x85 find error consult by code{0x1.0x2.0x5.0x20.0x0} act {2.0.0.0.0}, delay{0} disk {5} DevLunId{6} path {3}.

 

2021-07-07T13:51:13.136Z cpu81:2103203)UPA-log: INTF_KLS_Log:1106: [11070][ERROR][LPM][LPM_CmdActCmdError][2266]cmd fail, because XMP_ACT_CMD_ERROR, pass to upper layer.

 

 

Does anyone have an idea what that's supposed to mean?

0 Kudos
2 Replies

That is something like connectivity issue but did you check the multipathing software compatibility with vSphehre 7.x before upgrade. In these situations, upgrading driver and firmware maybe help.

-------------------------------------------------------------------------------------
Davoud Teimouri - https://www.teimouri.net - Twitter: @davoud_teimouri Facebook: https://www.facebook.com/teimouri.net/
0 Kudos
DieterEhrenhoef
Contributor
Contributor

The technician who did the update noticed the same error messages with version 6.5, but far less of them. We also didn't notice any issues while running the setup. The increased number of error messages just seemed a bit strange. Anyway, we'll check for driver updates. Thank you!

0 Kudos