ESXi 6.7.0 U2 and ESXi 6.5.0 U2 both give the same error. I am using an MSI B450-A-Pro motherboard, AMD Ryzen 7 1700 and 32G RAM. I get the following error, " no network adapters were detected. either no network adapters are physically connected or a suitable driver could be located."
Any help would be appreciated.
I thought I would update this post as I was able to add the Realtek drivers for my NIC adapter into the ISO and I have managed to install ESXi 6.7 U2 on my MSi motherboard with AMD Ryzen 7 1700 processor.
However, I now receive a Hardware Virtualization Warning, indicating hardware virtualization is not a feature of the CPU or is not enabled in the BIOS.
I have confirmed hardware virtualization is supported and enabled in BIOS.
Any help would be appreciated,
AMD Ryzen can run on ESXi
Maybe it is homelab simple test can be installed successfully
Computer specifications are as follows:
AMD Ryzen R5-3400G
Asrock DeskMini A300 (Need BIOS P3.5 -Update support CPU microcode )
Micron SO-DIMM DDR4-3200 16GB*2
PLEXTOR M9PeG 512GB M.2 2280 PCIe SSD*1
Noctua NH-L9a-AM4 (Thin cpu cooling fan)
The computer is installed and only runs 1 virtual machine.
Test and physical machine performance difference
As the Asrock DeskMini A300 and MSI B450-A-Pro motherboard
The built-in network cards are all Realtek RTL8111H (A300 can not be inserted into the card slot) <== net-r8168
Also install a consumer SATA driver <== sata-xahci
So I have added NIC driver & consumer SATA driver support before installation.
Use esxi 6.7U2
Asrock DeskMini A300
- Motherboard: 5.8" x 5.4" (Mini-STX)
- Barebones: 155 x 155 x 80 mm (1.92L)
Install only M.2 SSD 512GB
Hi Satman ,
Yes AMD Ryzen work with VMware ESXi 6.5 but only in home labs or in small environments . Because to when you installed ESXi 6.5 on AMZ Reyzen may be you will get PSOD on same time or latter . Although they have fix the issue like PSOD and many other Linux kernel issues , Disabling SMT is not good fix as it effect the performance.
ESXI6.5U1 should solve the SMT problem
Although I don't know exactly the stability
But I am happy to see ESXI compatibility getting better and better.
Can you please tell me on the DeskMini A300 which devices are able to be passthrough to the guest?
On this A300, it seems there the SATA, USB, and NVMe are not hanging from the chipset but rather directly from the CPU.
This means there is a good chance these items can be directly passed through to the guest VM.
If you are able, can you please test if you can are able to individually isolate and pass through the USB controller, NVMe, and SATAs?
Items in the black box in the picture cannot be selected individually
Although it can be checked
However, the host USB will not be available (the ESXI physical machine cannot use the keyboard)
I tested the VM of WIN7, USB can passthrough
But USB needs driver not recognized
And after a while ESXI may not respond
This equipment is not recommended
Passthrough using ESXI is not very stable
I'll say "YES"
Ryzen 7 3700X, stock cooler, ASRock B450M Pro4-F mainboard, 32Gig G.Skill Ripjaws 3400Mhz RAM, SSD and SATA HDDs.
Uptime of 14 days now, collection of 10 x Windows Server 2012R2, Linux Debian and FreeBSD servers running 24x7...
CPU with one core flat-out reaches 4.5GHz, with 4 x cores flat-out 4.0GHz per core.
For past 2 weeks at least 1 x core was running flat-out all the time.
Hardware PCI Passthrough? I don't use it, I don't need it..... no hardware listed in vSphere client is listed as "capable".
Happy? Very this machine is fast!
Hi, i am about to buy same CPU for my ESXI homelab as you got. Please tell me i was looking for motherboards with Intel NIC integrated...but i saw you got realtek one did you change Image to make it work ? or do you have Intel lan card ? BR Rok
How did you create you iso?
I've created one myself. It detects my network card, but unfortunatelly is does not detect any harddrive in my Deskmini A300.
I've (for testing purposes) install 2 x m2 drives and one drive to the sata connector.. none get detected.
I've imported sata-xahci-1.42-1-offline_bundle and net55-r8168-8.045a-napi-offline_bundle. Network works, but not drives.
I have very similar setup for my PC, vmware is working nice and smooth, but i can't understand about CPU performance, you wrote that your cpu is boosting till 4-4.5GHZ, how can you measure it?
Im running windows server 2016 and it show only clock base 3.6GHZ and under load it doesnt boost higher.
I would appreciate your comments. applepanic
Apparently "Windows doesn't have access to CPU information running as a VM. It will always just show the base clock as the speed"
When you have windows task manager telling you CPU is running 100% (or 50% with 2 x CPU VM), check the actual CPU speed used by the VM with any of your VM tools (vSphere, web client, etc.)
I actually have both (onboard, and Intel LAN card), and both are working. Yes I stitched the realtek driver into the vmware ISO (info from https://www.v-front.de) using esxi-customizer (although old, still worked).
The intel LAN card is a "CT Desktop Adapter" (can't remember the actual intel LAN chip number). Did some speed tests using both NICs, but same speed - no advantage from the Intel NIC, since actual transfer speed seems heavily dependent on CPU capability.
Probably will need a server-grade NIC for better throughput...
Just an update to my 02-27-2020 post:
Still running 24/7, however had 2 x purple-screen-of-death's since then. Have not really investigated, but plan on upgrading esxi 6.7.0 with latest patches if it happens again (yes still running 6.7.0 Update 3 (Build 15160138) - should have patched for security fixes long ago I guess!). Maybe something got fixed in patches that will fix this very in-frequent purple screen.
If patching does not help, plan B is to de-clock the RAM a bit...
But for now, uptime 55 days - but I rebooted manually 55 days ago since I added a Samsung 970 Evo Plus NVMe M2 SSD to the motherboard 🙂 all VMs now running from this fast SSD 🙂 (so I can't really remember when the last purple screen happened... yes I need to patch.... :)) Before reboot I was only using the Intel NIC as well, and after reboot now only using the Realtek NIC.... touch wood no purple screen since...
When I try to install ISXI I get the error "Failed to initialize acpi subsystem : Failure" and the installation does not continue
I tried with versions 6.7 and 7.02 and got the same error in both
Mainboard :Asrock Deskmini x300 Bios 1.70
CPU : Ryzen 7 5700G
Ram : 2 X Kingston 32 GB KVR32S22D8/32
HDD : Samsung 980 MZ-V8V500BW