Czernobog
Expert
Expert

[vRA 7.6] filesystem corrupt after reboot?

Jump to solution

I have rebooted my vRA 7 appliance today, when booting following error occured:

Czernobog_0-1634754338822.png

Trying to run fsck on /dev/sde1 results in not finding the filesystem:

Czernobog_1-1634754443132.png

 

fdisk -lu shows following disks:

Czernobog_2-1634754511839.pngCzernobog_3-1634754537651.png

The appliance has 4 disks attached:

Czernobog_4-1634754647375.png

 

There was no power outage, HA failover or similar happening.

Is there a guide to fixing this specifically for vRA? I've seen people postign about similar issues with the VCSA or vROps, but the workaround could not be applied here.

 

0 Kudos
1 Solution

Accepted Solutions
Czernobog
Expert
Expert

Solved: during a disk extension the entry in /etc/fstab that would make the changes permanent had an error. This was corrected and after a reboot the appliance is running again.

View solution in original post

0 Kudos
1 Reply
Czernobog
Expert
Expert

Solved: during a disk extension the entry in /etc/fstab that would make the changes permanent had an error. This was corrected and after a reboot the appliance is running again.

0 Kudos