hi
i am in the process of removing vShield 5.5.3 from Vmware 5.5 enviroment, i have unistalled endpoints off the esx servers but now i have the portgroups left and the virtual appliance, i cannot find anything in the documents how to do this correctly but like to ask if anyone knows how to do this?
BR
Ingvar
To remove all vShield components
Always start with automated uninstall feature(You have already done this)
a)Remove the vmservice-vswitch that was created during the install (assuming there is no other device that uses this vswitch). This is a service vSwitch with no physical adapters that was created during the install. This will have 2 port groups, one called vmservice-vmknic-pg and the other vmservice-vsheild-pg.
b)Remove the 169.x.x.x address given to the Net.DVFilterBindIpAddress property for the host. Select the ESXi host on the left hand side tree, on the right hand pane select the Configuration tab and click on Advanced Settings under Software. In the Advaced Settings page look for the Net section and select it. Scroll all the way down and then make your way up until you find Net.DVFilterBindIpAddress = 169.254.1.1. Remove the 169.254.1.1 and click OK
After performing same step on all the host finally do a web manager restart
Log-into the vShield Manager console and restart the web-manager component:
Manager#no web-manager
Manager#web-manager
To remove all vShield components
Always start with automated uninstall feature(You have already done this)
a)Remove the vmservice-vswitch that was created during the install (assuming there is no other device that uses this vswitch). This is a service vSwitch with no physical adapters that was created during the install. This will have 2 port groups, one called vmservice-vmknic-pg and the other vmservice-vsheild-pg.
b)Remove the 169.x.x.x address given to the Net.DVFilterBindIpAddress property for the host. Select the ESXi host on the left hand side tree, on the right hand pane select the Configuration tab and click on Advanced Settings under Software. In the Advaced Settings page look for the Net section and select it. Scroll all the way down and then make your way up until you find Net.DVFilterBindIpAddress = 169.254.1.1. Remove the 169.254.1.1 and click OK
After performing same step on all the host finally do a web manager restart
Log-into the vShield Manager console and restart the web-manager component:
Manager#no web-manager
Manager#web-manager
Thanks Sree
now the portgroups are gone and the ip address in the advanced config.
what is the best way to remove the vshield appliance and deregister vshield from the vmware console?
BR
Ingvar
I believe you are talking about partner antivirus solution since this is endpoint environment.Mostly you will be getting host un preparation option in partner appliance manager solution .Remember that while using the solution you would installed thin agent inside the guest machine via vmtools.Either you can leave it as it is or just remove the agent from each guest O/S.
> now the portgroups are gone and the ip address in the advanced config.
> what is the best way to remove the vshield appliance and deregister vshield from the vmware console?
If under the 'appliance' here you mean the vCNS/vShield manager and if the 'vmware console' means the vSphere client then :
- power off the Manager
- unregister the vShield extension form vCenter as it is written in KB 1025360
the vShield Manager plugin is the 'com.vmware.vShieldManager'
Of course do it after you unprepared all the element in vShield manager, otherwise you might get issues with the leftovers.
HTH
//Roland
Thanks Roland
yes i mean the appliance that is for vSphere vShield ( VMware vCloud Networking and Security )
i thought that maybe turning the appliance off and remove it was not just enough.
so is shutting down the appliance, removing the extension and delete the vShileld appliance is sufficent to get the enviroment as it was before vShield installation?
i have already unistalled all drivers and cleaned up the hosts.
BR
Ingvar
Yes,those steps are sufficient enough.
Hi,
I have Vshield 5.5 environment. I want to remove it completely from our current environment and then upgrade to 6.5.
Are there any best practices? This is our prod enviroment. Just want to make sure.
Please help,
Mathi