Esxi Networking problem HP proliant

[Anas_Mujahed]

Dear All ,

Please any one can help , I'm install VMware 5.5 configuration & activated on HP Proliant server , then install 3 VM Machine , configuration and activated all machines  on it , I’m power off the server and move it to installed on new Data center when ESxi Initialize  bring me i a message "No network adapters were detected " , I’m try to restore server from BIOS to default and reset network configuration but the same problem , any help and suggestions .

Regards

[rcporto]

If the network adapter is not onboard, try remove and insert the NIC board again on motherboard slot... and during the boot (and before load the ESXi), check if you see anything related to network card detection.

[admin]

Please check in BIOS if network card is detected or not? if Not then please remove it and reinsert it to motherboard. and recheck in BIOS configuration. If BIOS can not detect it then ESX will also not show in configuration.

Thanks,

Dishank

[dhanarajramesh]

which image did you use to install the ESXi? in order to available all the drivers, kindly use HP customized ESXi image. it can be downloadable from HP site

http://www8.hp.com/us/en/products/servers/solutions.html?compURI=1499005#tab=TAB4