Consolidated Backup and Data Protector

e0558267 · ‎12-23-2008

We are looking for help to fix our backup test with Consolidated Backup and Data Protector.

We are trying to use VMware Consolidated Backup with Data Protector, but we are starting the backup process and we are getting the following error messages:

<![endif]~~><!~~[if gte mso 9]><![endif]~~><!~~[if !mso]>

st1\:*

</style> <![endif]-->

Could not obtain inquiry page 128

for device on path 0, target 4, lun 0

Sending SCSI inquiry failed: The

request could not be performed because of an I/O device error.

(Error code 45d)

Could not scan this device. The

device will be ignored. This will only cause the operation to fail if the

device contained relevant data.

Could not obtain inquiry page 128

for device on path 0, target 5, lun 0

Sending SCSI inquiry failed: The

request could not be performed because of an I/O device error.

(Error code 45d)

Could not scan this device. The

device will be ignored. This will only cause the operation to fail if the

device contained relevant data.

SSLVerifyCertAgainstSystemStore:

Subject mismatch: VMware vs BOGEVICENTP.red.ecopetrol.com.co

SSLVerifyCertAgainstSystemStore: The

remote host certificate has these problems:

etrol.com.co

2008-12-23 11:03:38.330 'BaseLibs' 2088 warning] SSLVerifyCertAgainstSystemStore: The

remote host certificate has these problems:

etrol.com.co

Completed... 2%

The host name used for the connection does not match

the subject name on the host certificate

ost certificate has these problems:

etrol.com.co

The host name used for the connection does not match the

subject name on the host certificate

ost certificate has these problems:

etrol.com.co

Completed... 2%

A certificate in the host's

chain is based on an untrusted root.

SSLVerifyIsEnabled: failed to read

registry value. Assuming verification is disabled. LastError = 0

SSLVerifyCertAgainstSystemStore:

Certificate verification is disabled, so connection will proceed despite the

error

SSLVerifyCertAgainstSystemStore:

Subject mismatch: VMware vs BOGEVICENTP.red.ecopetrol.com.co

SSLVerifyCertAgainstSystemStore: The

remote host certificate has these problems:

etrol.com.co

2008-12-23 11:03:41.126 'BaseLibs' 2088 warning] SSLVerifyCertAgainstSystemStore: The

remote host certificate has these problems:

etrol.com.co

Completed... 2%

The host name used for the connection does not match

the subject name on the host certificate

ost certificate has these problems:

etrol.com.co

The host name used for the connection does not match the

subject name on the host certificate

ost certificate has these problems:

etrol.com.co

Completed... 2%

A certificate in the host's

chain is based on an untrusted root.

SSLVerifyIsEnabled: failed to read registry

value. Assuming verification is disabled. LastError = 0

SSLVerifyCertAgainstSystemStore:

Certificate verification is disabled, so connection will proceed despite the

error

No path to device

LVID:48a4ddaa-a45e6948-b1bf-001b785b9512/48a4ddaa-87541fe8-982c-001b785b9512/1

found.

Error: Failed to open the disk: Cannot

access a SAN/iSCSI LUN backing this virtual disk. (Hint: If you are using

vcbMounter you can use the option "-m ndb" to switch to network based

disk access if this is what you want.) If you were attempting file-level

access, stop the vmount Service by typing "net stop vmount2" on a

command prompt to force vmount to re-scan for SAN LUNs and re-try the command.

An error occurred, cleaning up...

Deleted directory e:
\INTRANET80_CALIDAD

Error VM :'INTRANET80_CALIDAD' snapshot failed

From: BSM@backsrv80 "VCB Test"

Time: 12/23/2008 11:03:46 AM

Session pre-exec script vmwarepreexec.cmd -a INTRANET80_CALIDAD -r e:\ -t

fullvm failed. Exit code = 1

The session will not start.

From: BSM@backsrv80 "VCB Test"

Time: 12/23/2008 11:04:23 AM

None of the Disk Agents

completed successfully.

Session has failed.

From: BSM@backsrv80 "VCB

Test" Time: 12/23/2008 11:04:23 AM

Backup Statistics:

Session Queuing Time (hours)

0.00

-

Completed Disk Agents ........

0

Failed Disk Agents ...........

1

Aborted Disk Agents ..........

0

-

Disk Agents Total ...........

1

========================================

Completed Media Agents .......

0

Failed Media Agents ..........

0

Aborted Media Agents .........

0

-

Media Agents Total ..........

0

========================================

Mbytes Total ................. 0

MB

Used Media Total .............

0

Disk Agent Errors Total ......

0

From: BSM@backsrv80 "VCB

Test" Time: 12/23/2008 11:04:23 AM

Starting to execute

"vmwarepostexec.cmd"...

Microsoft (R) Windows Script Host Version 5.6

reserved.

Starting: "C:\Program Files\VMware\VMware

Consolidated Backup Framework
vcbmounter.exe" -h

BOGEVICENTP.red.ecopetrol.com.co -u vcb_user -p ******** -U

"e:
\INTRANET80_CALIDAD"

Current working directory:

C:\WINDOWS\system32

HOSTINFO: Seeing Intel CPU,

numCoresPerCPU 1 numThreadsPerCore 2.

HOSTINFO: This machine has 1 physical

CPUS, 1 total cores, and 2 logical CPUs.

Using system libcrypto, version 90709F

SSLVerifyCertAgainstSystemStore:

Subject mismatch: VMware vs BOGEVICENTP.red.ecopetrol.com.co

SSLVerifyCertAgainstSystemStore: The

remote host certificate has these problems:

etrol.com.co

2008-12-23 11:04:54.705 'BaseLibs' 3680 warning] SSLVerifyCertAgainstSystemStore: The

remote host certificate has these problems:

etrol.com.co

Completed... 2%

The host name used for the connection does not match

the subject name on the host certificate

ost certificate has these problems:

etrol.com.co

The host name used for the connection does not match the

subject name on the host certificate

ost certificate has these problems:

etrol.com.co

Completed... 2%

A certificate in the host's

chain is based on an untrusted root.

SSLVerifyIsEnabled: failed to read

registry value. Assuming verification is disabled. LastError = 0

SSLVerifyCertAgainstSystemStore:

Certificate verification is disabled, so connection will proceed despite the

error

Error: Could not read unmount

information

From: BSM@backsrv80 "VCB Test" Time:

12/23/2008 11:04:56 AM

Session post-exec script

vmwarepostexec.cmd failed. Exit code = 1.

From: BSM@backsrv80 "VCB

Test" Time: 12/23/2008 11:04:56 AM

The exec script

"vmwarepostexec.cmd" has completed.

============================================================================

Session failed!

============================================================================

Thanks,

Jairo Cárdenas

All

Consolidated Backup and Data Protector