Good night
Could you please clarify the following question for me?
When Edge Clusters are created in VCF, a minimum of two 2 edges must be added but it is not clear to me if one Edge should go with the BGP values of DC1 and the second Edge with the BGP values of DC2. The above is correct, now I can create 4 Edges (2 for each Datacenter)
The parameters I have are the following:
BGP NSX-T: 65001
BGP Switch Peer ASN: 65101 (ToR AZ1)
Primary Tier 0 Uplink Interface: 192.168.47.2-3/24
BGP Peer IP: 192.168.47.254
Secondary Tier 0 Uplink Interface: 192.168.48.2-3/24
BGP Peer IP: 192.168.48.254
BGP Switch Peer ASN: 65102 (Tor AZ2)
Primary Tier 0 Uplink Interface: 192.168.47.130-131/24
BGP Peer IP: 192.168.47.253
Secondary Tier 0 Uplink Interface: 192.168.48.130-131/24
BGP Peer IP: 192.168.48.253
Thanks for your comments
Best Regards
SAN
