Reply to Message

View discussion in a popup

Replying to:
HCBV
Enthusiast
Enthusiast

My ESXi is installed on a dual SD card that uses the USB bus.

I believe I had posted the logfiles before but I will try to get a new one.

I didn't check for dead paths before rebooting the machine, currently it is working:

vmhba33:C0:T0:L0 state:active mpx.vmhba33:C0:T0:L0 vmhba33 0 0 0 NMP active local usb.vmhba33 usb.0:0

 

EDIT:

 

vmkernel.log is full of vmhba33 errors and faults, like this:

2021-06-08T08:43:56.206Z cpu11:2097365)WARNING: NMP: nmpUnclaimPath:1732: NMP device "mpx.vmhba33:C0:T0:L0" quiesce state change failed: Busy

2021-06-08T08:44:17.878Z cpu16:2451749)Vol3: 3711: Could not open device 'mpx.vmhba33:C0:T0:L0:7' for probing: No connection
2021-06-08T08:44:17.878Z cpu10:2451751)Vol3: 3711: Could not open device 'mpx.vmhba33:C0:T0:L0:5' for probing: No connection
2021-06-08T08:44:17.878Z cpu16:2451749)Vol3: 3711: Could not open device 'mpx.vmhba33:C0:T0:L0:7' for probing: No connection
2021-06-08T08:44:17.878Z cpu10:2451751)Vol3: 3711: Could not open device 'mpx.vmhba33:C0:T0:L0:5' for probing: No connection
2021-06-08T08:44:17.878Z cpu16:2451749)Vol3: 3711: Could not open device 'mpx.vmhba33:C0:T0:L0:7' for probing: No connection
2021-06-08T08:44:17.878Z cpu10:2451751)Vol3: 3711: Could not open device 'mpx.vmhba33:C0:T0:L0:5' for probing: No connection
2021-06-08T08:44:17.878Z cpu16:2451749)Vol3: 3711: Could not open device 'mpx.vmhba33:C0:T0:L0:7' for probing: No connection
2021-06-08T08:44:17.878Z cpu10:2451751)Vol3: 3711: Could not open device 'mpx.vmhba33:C0:T0:L0:5' for probing: No connection

 

I am running with:

vmkusb 0.1-1vmw.702.0.0.17867351 VMW VMwareCertified 2021-05-02

Reply
0 Kudos