Reply to Message

View discussion in a popup

Replying to:
timfawcett
Contributor
Contributor

Hi - so I've already upgraded the firmware as a previous troubleshooting step.  The output of the command is below.  In vSphere - Configuration - Storage only disks are listed, no controller cards, although under Software Components I see entries for the LSIprovider and Avago scsi-megaraid...

~ # esxcfg-scsidevs -a

vmhba0  ata_piix          link-n/a  sata.vmhba0                             (0:0:31.2) Intel Corporation ICH10 4 port SATA IDE Controller

vmhba1  ata_piix          link-n/a  sata.vmhba1                             (0:0:31.5) Intel Corporation ICH10 2 port SATA IDE Controller

vmhba2  megaraid_sas      link-n/a  unknown.vmhba2                          (0:1:0.0) LSI / Symbios Logic MegaRAID SAS GEN2 Controller

vmhba3  lpfc820           link-up   fc.20000000c9e8400e:10000000c9e8400e    (0:26:0.0) Emulex Corporation LPe11000 4Gb Fibre Channel Host Adapter

vmhba4  lpfc820           link-up   fc.20000000c9e8400f:10000000c9e8400f    (0:26:0.1) Emulex Corporation LPe11000 4Gb Fibre Channel Host Adapter

vmhba32 bnx2i             unbound   iscsi.vmhba32                           Broadcom iSCSI Adapter

vmhba33 bnx2i             unbound   iscsi.vmhba33                           Broadcom iSCSI Adapter

vmhba34 bnx2i             unbound   iscsi.vmhba34                           Broadcom iSCSI Adapter

vmhba35 bnx2i             unbound   iscsi.vmhba35                           Broadcom iSCSI Adapter

vmhba36 ata_piix          link-n/a  sata.vmhba36                            (0:0:31.2) Intel Corporation ICH10 4 port SATA IDE Controller

vmhba37 ata_piix          link-n/a  sata.vmhba37                            (0:0:31.5) Intel Corporation ICH10 2 port SATA IDE Controller

Reply
0 Kudos