Reply to Message

View discussion in a popup

Replying to:
TheCableGuy96
Contributor
Contributor

So I've now created a new VMKernel NIC and set it to the new port group for the additional vLAN. I have also set the IP and gateway and assigned it to that to a new TCP/IP stack I created for this vLAN (had to do this in SSH).

However, when I go to set the gateway and DNS settings for the new TCP/IP stack it's greyed out. The gateway below this is not reyed out but fails to set. So I googled around and found someone else who had the same issue. I followed what they did:

esxcli network ip interface ipv4 set --interface-name=vmk1 --type=static --ipv4=192.168.10.40 --netmask=255.255.255.0 --gateway=192.168.10.254

This appears to have worked from what I see:

esxcli network ip interface ipv4 get
Name IPv4 Address IPv4 Netmask IPv4 Broadcast Address Type Gateway DHCP DNS
vmk0 192.168.1.40 255.255.255.0 192.168.1.255 STATIC 192.168.1.254 false
vmk1 192.168.10.40 255.255.255.0 192.168.10.255 STATIC 192.168.10.254 false

But it's not showing as being set in ESXi Host Client and I still don't see how to set the DNS for it?

192.168.10.40 is also not responding to ping even though I set the ports as part of that vLAN (I've tried tagged and untagged).

Thanks for your support.

Reply
0 Kudos