Reply to Message

View discussion in a popup

Replying to:
SebDooris
Contributor
Contributor

ESXi 5.0 Nic teaming on a Cisco 3750

Hi

Let me just start by saying I'm not a networks guy so be gentle.

I'm trying to configure a Cisco 3750G Version 12.2(44)SE5 with my new ESXi server.

When setting up "Configure Managment Network" I select vmnic0 and vmnic1 and dont set the VLAN but I get no traffic.

Have verified that that vlan160 traffic is carried on the switch and have tried setting the vlan on the esx with no luck.

This is my current config from the 3750.

================================================================================

#show etherchannel summary

3      Po3(SU)          -        Gi1/0/5(P)  Gi1/0/6(P)

================================================================================

#show etherchannel protocol

Group: 3
----------
Protocol:   -  (Mode ON)

================================================================================

#show etherchannel 3 detail
Group state = L2
Ports: 2   Maxports = 8
Port-channels: 1 Max Port-channels = 1
Protocol:    -
Minimum Links: 0
                Ports in the group:
                -------------------
Port: Gi1/0/5
------------

Port state    = Up Mstr In-Bndl
Channel group = 3           Mode = On              Gcchange = -
Port-channel  = Po3         GC   =   -             Pseudo port-channel = Po3
Port index    = 0           Load = 0x00            Protocol =    -

Age of the port in the current state: 0d:19h:19m:36s

Port: Gi1/0/6
------------

Port state    = Up Mstr In-Bndl
Channel group = 3           Mode = On              Gcchange = -
Port-channel  = Po3         GC   =   -             Pseudo port-channel = Po3
Port index    = 0           Load = 0x00            Protocol =    -

Age of the port in the current state: 0d:19h:19m:36s

                Port-channels in the group:
                ---------------------------

Port-channel: Po3
------------

Age of the Port-channel   = 0d:19h:19m:56s
Logical slot/port   = 10/3          Number of ports = 2
GC                  = 0x00000000      HotStandBy port = null
Port state          = Port-channel Ag-Inuse
Protocol            =    -
Port security       = Disabled

Ports in the Port-channel:

Index   Load   Port     EC state        No of bits
------+------+------+------------------+-----------
  0     00     Gi1/0/5  On                 0
  0     00     Gi1/0/6  On                 0

Time since last port bundled:    0d:19h:19m:36s    Gi1/0/6
Time since last port Un-bundled: 0d:19h:19m:56s    Gi1/0/6

================================================================================

#show running-config
port-channel load-balance dst-ip
spanning-tree mode pvst
spanning-tree extend system-id
!

interface GigabitEthernet1/0/5
switchport access vlan 160
switchport mode access
channel-group 3 mode on
!
interface GigabitEthernet1/0/6
switchport access vlan 160
switchport mode access
channel-group 3 mode on

!

Reply
0 Kudos