Reply to Message

View discussion in a popup

Replying to:
vfovermars
Contributor
Contributor

Hi there,

I've done a lot of testing on all kind of SRA levels, V7000 levels and SRM versions. Lots of call's at IBM, VMware and tested several SRA's from the development team and test lab in Mainz.

Here's my working setup.

First of all, use the NON-preconfigured environment. Don't use the preconfigured environment. Use the latest SRA version you can download at the VMware site. At the time of this reply, this is version .....24.zip

Leave all the checkboxes empty and don't fill in the Src. Mdisk Group ID and Target Mdisk Group ID.

Set the Test MDisk Group ID according to your V7000 setup at both sites. You might need to ad the ID feeld in the V7000 Gui to be able to read the ID..

You can use SpaceEfficient Mode or not.

SRV-DC-01-A (680 474 121) - TeamViewer_2013-04-24_00-40-08.jpg

Within SRM adjust the advanced settings at both sites.

Set the repeat count settings at 2 and the timeout at 600

SRV-DC-01-A (680 474 121) - TeamViewer_2013-04-24_00-53-47.jpg

Dont forget to change all the settings at both sites.

Hope this helps.

This setting works for me.

Reply
0 Kudos