Dee006's Accepted Solutions

Hi JVM, 1.Initial replication you can set the RPO for 4 hours untill the replicated to the DR site and later you can reduce to 15 or 30 minutes depends on your business requirement. 2.Few onl... See more...
Hi JVM, 1.Initial replication you can set the RPO for 4 hours untill the replicated to the DR site and later you can reduce to 15 or 30 minutes depends on your business requirement. 2.Few online tools are available to calculate the bandwidth required based on the disk size.Initial seed you definetly go with bandwidth bursting 10+ of link speed and later you can reduce it. 3.For Isolation network you can refer the following documentation,in both source and destination you need to add static routes to work the isolated network. Create a VM Network Adapter to Use for Incoming Replication Traffic on the Combined vSphere Replication Appliance 4.DNS and time sync is must for vR implementation,it will break the pair and you can add the host entry if you are having small environment.
Hi M4T, Please try with automatic and then check whether the Graphic card visible inside your VM.If it is not visible then you need to investigate on the compatibility matrix with respective t... See more...
Hi M4T, Please try with automatic and then check whether the Graphic card visible inside your VM.If it is not visible then you need to investigate on the compatibility matrix with respective to hypervisor version. Configure 3D Graphics and Video Cards
Hi, I think the path is not visible,have a try with below URL https://my.vmware.com/group/vmware/details?downloadGroup=ESXI60U3&productId=491&rPId=14969
Can you check DNS related stuff's and host allow in your NFS server and esxi firewall allow rules.
Hi, This is tricky environment.What is your RPO set for the server and how much the time the back takes to complete? Let say an example the your current RPO set as 15 minutes and backup tim... See more...
Hi, This is tricky environment.What is your RPO set for the server and how much the time the back takes to complete? Let say an example the your current RPO set as 15 minutes and backup time takes 1 hour to complete the full VM backup.    In this case,I prefer you to change the RPO time to 2 hours or 1 hours based on the backup time.VRA will mainly look for CBT based on your RPO time,I prefer you to change the RPO time of the individual server based on backup time.
Hi Aman, I think there is no specific log files for the datastore related,most the logs will be available in the vmkerenel logs.Try to check /var/log/vmkernel.log https://kb.vmware.com/s... See more...
Hi Aman, I think there is no specific log files for the datastore related,most the logs will be available in the vmkerenel logs.Try to check /var/log/vmkernel.log https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2032076
Hi, 1) As this will be my first time creating such a VM, hence are there any issues with VMs running under UEFI Mode on ESXi 5.5 / 6.0, in terms of hardware support, etc? No 2) What ... See more...
Hi, 1) As this will be my first time creating such a VM, hence are there any issues with VMs running under UEFI Mode on ESXi 5.5 / 6.0, in terms of hardware support, etc? No 2) What are the settings required to create an GPT-partition VMs in ESXi vSphere Client? Need to change the boot setting to EFI in advance tab. 3) Any best practices that I can find for creating and using of GPT-partition VMs in ESXi 5.5 / 6.0? Disk Partition Alignment Best Practices for SQL Server For more information refer the below doc Using EFI/UEFI firmware in a VMware Virtual Machine
Cloning operation time depends upto the server I/O,Size and etc...Mostly poweroff VM will be faster in cloning operation.. C# VMware Template Creation: Make VMware Templates in vCenter Server... See more...
Cloning operation time depends upto the server I/O,Size and etc...Mostly poweroff VM will be faster in cloning operation.. C# VMware Template Creation: Make VMware Templates in vCenter Server Webclient http://notesfrommwhite.net/2014/07/20/how-to-build-a-windows-2012-r2-vmware-template/
vmk0       Management Network  IPv6      fe80::a236:9fff:fe3e:cbcc               64                              a0:36:9f:3e:cb:cc 1500    65535     true    STATIC, PREFERRED It looks like your ... See more...
vmk0       Management Network  IPv6      fe80::a236:9fff:fe3e:cbcc               64                              a0:36:9f:3e:cb:cc 1500    65535     true    STATIC, PREFERRED It looks like your vmk0 is using the IPV6 insist of the IPv4,Can you try to disable the IPv6 in your vmk0?
Hi, I believe you need to download the bundle separately.Please download according to the version your esxi version. VMware vSphere 5: Private Cloud Computing, Server and Data Center Virtuali... See more...
Hi, I believe you need to download the bundle separately.Please download according to the version your esxi version. VMware vSphere 5: Private Cloud Computing, Server and Data Center Virtualization Message was edited by: Dee006
Hi Thomas, Try to restart the entire services services.sh restart
Hi Prakash, I guess your vmdk file get locked. http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=10051 To add to inventory you can register the ... See more...
Hi Prakash, I guess your vmdk file get locked. http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=10051 To add to inventory you can register the vm VMware KB: Registering or adding a virtual machine to the inventory on vCenter Server or on an ESX/ESXi host