I deaktivated now the SSD Smart Path in the HP Settings. Now the latency is much better. I dont think that any hardware was or is damaged because i tried to change same parts. But i dont know wh...
See more...
I deaktivated now the SSD Smart Path in the HP Settings. Now the latency is much better. I dont think that any hardware was or is damaged because i tried to change same parts. But i dont know why it suddenly happens.
I have an ProLiant DL360 Gen9 with a 440ar Raid Controller with Raid 6 and 4 SSD Disks. Suddenly i have very high disk latency even if there is no vm running. I have already tryed to change the con...
See more...
I have an ProLiant DL360 Gen9 with a 440ar Raid Controller with Raid 6 and 4 SSD Disks. Suddenly i have very high disk latency even if there is no vm running. I have already tryed to change the controller and the Smart Storage Battery but it still does not work. I have also the latest driver updates. VMware ESXi 7.0.3 build-20036589 VMware ESXi 7.0 Update 3 Smart Array P440ar in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: PDNLH0BRH753PJ Cache Serial Number: PDNLH0BRH753PJ RAID 6 Status: Enabled Controller Status: OK Hardware Revision: B Firmware Version: 7.00 Firmware Supports Online Firmware Activation: False Rebuild Priority: High Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Parallel Surface Scan Supported: Yes Current Parallel Surface Scan Count: 1 Max Parallel Surface Scan Count: 16 Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: Not Configured Drive Write Cache: Disabled Total Cache Size: 2.0 Total Cache Memory Available: 1.8 Battery Backed Cache Size: 1.8 No-Battery Write Cache: Disabled SSD Caching RAID5 WriteBack Enabled: True SSD Caching Version: 2 Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Spare Activation Mode: Activate on physical drive failure (default) Controller Temperature (C): 49 Cache Module Temperature (C): 43 Number of Ports: 2 Internal only Encryption: Not Set Express Local Encryption: False Driver Name: nhpsa Driver Version: 70.0051.0.100-4vmw PCI Address (Domain Device.Function): 0000:03:00.0 Negotiated PCIe Data Rate: PCIe 3.0 x8 (7880 MB/s) Controller Mode: RAID Pending Controller Mode: RAID Port Max Phy Rate Limiting Supported: False Latency Scheduler Setting: Disabled Current Power Mode: MaxPerformance Survival Mode: Enabled Host Serial Number: CZJ6410R6R Sanitize Erase Supported: True Primary Boot Volume: None Secondary Boot Volume: None Smart Array P440ar in Slot 0 (Embedded) Array A physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: Solid State SATA Size: 4 TB Drive exposed to OS: False Logical/Physical Block Size: 512/512 Firmware Revision: SVQ02B6Q Serial Number: S5STNF0TB04130E WWID: 31402EC001E1BE70 Model: ATA Samsung SSD 870 SATA NCQ Capable: True SATA NCQ Enabled: True Current Temperature (C): 34 Maximum Temperature (C): 46 SSD Smart Trip Wearout: Not Supported PHY Count: 1 PHY Transfer Rate: 6.0Gbps PHY Physical Link Rate: Unknown PHY Maximum Link Rate: Unknown Drive Authentication Status: OK Carrier Application Version: 11 Carrier Bootloader Version: 6 Sanitize Erase Supported: False Shingled Magnetic Recording Support: None physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: Solid State SATA Size: 4 TB Drive exposed to OS: False Logical/Physical Block Size: 512/512 Firmware Revision: SVQ02B6Q Serial Number: S5STNF0TB04132T WWID: 31402EC001E1BE71 Model: ATA Samsung SSD 870 SATA NCQ Capable: True SATA NCQ Enabled: True Current Temperature (C): 36 Maximum Temperature (C): 47 SSD Smart Trip Wearout: Not Supported PHY Count: 1 PHY Transfer Rate: 6.0Gbps PHY Physical Link Rate: Unknown PHY Maximum Link Rate: Unknown Drive Authentication Status: OK Carrier Application Version: 11 Carrier Bootloader Version: 6 Sanitize Erase Supported: False Shingled Magnetic Recording Support: None physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: Solid State SATA Size: 4 TB Drive exposed to OS: False Logical/Physical Block Size: 512/512 Firmware Revision: SVQ02B6Q Serial Number: S5STNF0TB04152F WWID: 31402EC001E1BE72 Model: ATA Samsung SSD 870 SATA NCQ Capable: True SATA NCQ Enabled: True Current Temperature (C): 32 Maximum Temperature (C): 44 SSD Smart Trip Wearout: Not Supported PHY Count: 1 PHY Transfer Rate: 6.0Gbps PHY Physical Link Rate: Unknown PHY Maximum Link Rate: Unknown Drive Authentication Status: OK Carrier Application Version: 11 Carrier Bootloader Version: 6 Sanitize Erase Supported: False Shingled Magnetic Recording Support: None physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: Solid State SATA Size: 4 TB Drive exposed to OS: False Logical/Physical Block Size: 512/512 Firmware Revision: SVQ02B6Q Serial Number: S5STNF0TB04149L WWID: 31402EC001E1BE73 Model: ATA Samsung SSD 870 SATA NCQ Capable: True SATA NCQ Enabled: True Current Temperature (C): 29 Maximum Temperature (C): 45 SSD Smart Trip Wearout: Not Supported PHY Count: 1 PHY Transfer Rate: 6.0Gbps PHY Physical Link Rate: Unknown PHY Maximum Link Rate: Unknown Drive Authentication Status: OK Carrier Application Version: 11 Carrier Bootloader Version: 6 Sanitize Erase Supported: False Shingled Magnetic Recording Support: None
So actually i should have the same Right like the local Administator. With the local Administator i can also upload VMs so have permission the the datastore.
Vor Example: When i got to Administration - Users and Groups i got the Message "You have no privileges to view this object." But iam in the "Administrator" Roll. Iam also not able to Upload a ...
See more...
Vor Example: When i got to Administration - Users and Groups i got the Message "You have no privileges to view this object." But iam in the "Administrator" Roll. Iam also not able to Upload a VM because i got the error, that i do not have permission to the datastore.
I have connect my vCenter with the Active Directory of my Company. For example i put some AD Users in in the Adminstrator Permission Roll same where the Local Administrator is but the AD User do n...
See more...
I have connect my vCenter with the Active Directory of my Company. For example i put some AD Users in in the Adminstrator Permission Roll same where the Local Administrator is but the AD User do not have the same Rights.
